(no subject)

[beni.brinckman at dommel.be]

Hi all,

When attaching (hotplugging) my mp3 player (its a BeQube) to my fbsd
6.1-PreRelease, the whole pc freezes and a reset/reboot is all that is left.

In /var/log/messages this is what I get :

Feb 16 20:41:25 www kernel: umass1: vendor 0x10d6 USB 2.0(FS) FLASH DISK, rev
1.10/1.00, addr 2
Feb 16 20:41:26 www kernel: da5 at umass-sim1 bus 1 target 0 lun 0
Feb 16 20:41:26 www kernel: da5: <USB 2.0 (FS) FLASH DISK 1.00> Removable
Direct Access SCSI-0 device
Feb 16 20:41:26 www kernel: da5: 1.000MB/s transfers
Feb 16 20:41:26 www kernel: da5: 245MB (503521 512 byte sectors: 64H 32S/T
245C)
Feb 16 20:41:27 www kernel: umass1: BBB reset failed, STALLED
Feb 16 20:41:27 www kernel: umass1: BBB bulk-in clear stall failed, STALLED
Feb 16 20:41:27 www kernel: umass1: BBB bulk-out clear stall failed, STALLED
Feb 16 20:41:27 www kernel: (da5:umass-sim1:1:0:0): Synchronize cache failed,
status == 0x4, scsi status == 0x0
Feb 16 20:41:27 www kernel: umass1: at uhub2 port 1 (addr 2) disconnected
Feb 16 20:41:27 www kernel: (da5:umass-sim1:1:0:0): lost device
Feb 16 20:41:27 www kernel: (da5:umass-sim1:1:0:0): removing device entry
Feb 16 20:41:27 www kernel: umass1: detached

What goes wrong and more importend, how do I get my mp3 player attached
without freezing the whole pc ?

Thanks for any hints.

Beni.