NIC won't DHCP or configure

[Kevin Kinsey]

Andrew Robinson wrote:

>Hi Chuck,
>
>Thanks for the suggestion - that's beyond my exerptise, but here is the (hopefully relevant) output of pciconf
>
>###########################################
>
>none4 at pci10:3:0:	class=0x020000 card=0x09001558 chip=0x816910ec rev=0x10 hdr=0x00
>    vendor   = 'Realtek Semiconductor'
>    device   = 'RTL8169 Gigabit Ethernet Adapter'
>    class    = network
>    subclass = ethernet
>none5 at pci10:5:0:	class=0x028000 card=0x68331462 chip=0x02011814 rev=0x01 hdr=0x00
>    vendor   = 'Ralink Technology Corp'
>    class    = network
>
>
>###########################################
>
>I would appreciate any further advice or assistance,
>
>Andrew
>
>  
>

Hi, Andrew!

Normally I wouldn't suggest this, but I'm thinking in this case you
should trim all the really relevant bits of this conversation into one
well-edited email with a proper introduction and send it over to
"hackers at freebsd.org", unless someone pipes up and helps you
with this Real Soon Now(tm).  I'm thinking that it would be fairly
trivial*, and most of those fellas would love to have FreeBSD
support another 1000Mbps NIC....

Kevin Kinsey

*If I'm wrong, it's Chuck's fault, heh heh.... <?!>