IPv6 in rc.conf only: create gif0 / add route?
Vince
jhary at unsane.co.uk
Mon Mar 14 12:26:57 PST 2005
Since you are using a gif interface I assume you use a tunnel for your ipv6
connection.
Here is the relevant parts of my rc.conf which works
(I use a H.E. ipv6 tunnel (http://tunnelbroker.net)
but any gif tunnel should be similar)
gif_interfaces="gif0" # create the gif
gifconfig_gif0="62.140.220.90 64.71.128.83" # setup the ipv4 endpoints of
the tunnel
ipv6_enable="YES" # Set to YES to set up for IPv6.
ipv6_gateway_enable="YES"
ipv6_network_interfaces="gif0 fxp0" # List of network interfaces (or
"auto").
ipv6_defaultrouter="2001:470:1F01:FFFF::120" # Set to IPv6 default
gateway
ipv6_ifconfig_gif0="2001:470:1F01:FFFF::121 2001:470:1F01:FFFF::120
prefixlen 128" #setup ipv6 tunnel
ipv6_ifconfig_fxp0="2001:470:1F01:244::1 prefixlen 64" #set fxp0 ipv6
address
rtadvd_enable="YES" # Set to YES to enable an IPv6 router
rtadvd_interfaces="fxp1 fxp0 wi0" # Interfaces rtadvd sends RA
packets.
Some lines may wrap.
Vince
> -----Original Message-----
> From: owner-freebsd-questions at freebsd.org
> [mailto:owner-freebsd-questions at freebsd.org] On Behalf Of
> Fafa Diliha Romanova
> Sent: 13 March 2005 20:11
> To: questions at freebsd.org
> Subject: IPv6 in rc.conf only: create gif0 / add route?
>
> Hey!
>
> I am trying to add my entire IPv6 setup into rc.conf.
> But it seems it won't automagically create gif0, nor will it
> add the default route. This is my rc.conf:
>
> # *** IPv6 configuration
> #
> ipv6_enable="YES"
> ipv6_gateway_enable="YES"
> ipv6_network_interfaces="gif0"
> ipv6_defaultrouter="fe80::%gif0"
> ipv6_ifconfig_gif0="inet 213.183.143.59 213.121.24.85"
> ipv6_ifconfig_gif0="inet6 alias 2001:618:400:4572::1 prefixlen 64"
> ipv6_ifconfig_gif0="inet6 alias 2001:618:400:4572::2 prefixlen 64"
> ipv6_ifconfig_gif0="inet6 alias 2001:618:400:4572::3 prefixlen 64"
> ipv6_firewall_enable="YES"
> ipv6_firewall_type="open"
> rtadvd_enable="YES"
> rtadvd_interfaces="gif0"
>
> Is anybody able to tell what I lack?
> I certainly cannot ping6 6bone.net after reboot.
>
> Thanks!
>
> All the best,
> -- Fafa
>
> --
> ___________________________________________________________
> Sign-up for Ads Free at Mail.com
> http://promo.mail.com/adsfreejump.htm
>
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
> "freebsd-questions-unsubscribe at freebsd.org"
>
More information about the freebsd-questions
mailing list