ndis0 error, but it workd
Pietro Cerutti
pietro.cerutti at gmail.com
Mon Mar 14 03:45:30 PST 2005
Hi folks,
I have a HP compaq nx7000 notebook with 5.4-PRERELEASE (but the
problem was there in 5.2.1-RELEASE and 5.3-RELEASE too).
I have a small shell script to bring up my wlan with driver ndis:
> cat wlanup
#!/bin/sh
kldload ndis
kldload if_ndis
ifconfig ndis0 up
ifconfig ndis0 ssid 'my_ssid' nwkey 0xMy_Ex_Key_Here wepmode on
>
when I call wlanup as root, I get the following:
ndis0: <Intel (R) PRO/Wireless LAN 2100 3B Mini PCI Adapter> mem
0x90000000-0x90000fff irq 5 at device 2.0 on pci2
ndis0: NDIS API version: 5.1
ndis0: Ethernet address: my_Ex_MAC_Address_here
ndis0: 11b rates: 11Mbps 2MBps 1MBps 5.5Mbps
which sounds good. Then I get:
ndis0: enable WEP failed: 19
ndis0: enable WEP failed: 19
ndis0: enable WEP failed: 19
ndis0: enable WEP failed: 19
which doesn't sound good. Finally it says:
ndis0: link up
Then the wireless LAN works well, most of the times. Some times I get
a "network is down" message, so I have to reboot, and most of the
times it then works.
The problem is with the WEP key, as fas as I can understand the message.
I can assure you that the WEP key is the right one, I double checked
with the original one, however I have the prove, because the wlan
works.
What could lead to the "enable WEP failed: 19" error?
Thank you!
--
Pietro "Piter" Cerutti
<pietro.cerutti at gmail.com>
<piter at beansidhe.ch>
Beansidhe - SwiSS Death / Thrash Metal
<www.beansidhe.ch>
Windows: "Where do you want to go today?"
Linux: "Where do you want to go tomorrow?"
FreeBSD: "Are you guys coming or what?"
More information about the freebsd-questions
mailing list