Konica-Minolta DiMAGE E500 (da0:umass-sim0:0:0:0): Synchronize cache failed

[Hanno Krusken]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi there,
first of all, I'm using FreeBSD-5.4-RELENG-p2 and have gtkam-0.1.12_4
installed, it starts up nice but can not find my Konica-Minolta DiMAGE
E500 camera !

My problem is, that I get the output dump after plug in the USB cable
and switching the camera ON.
What other settings do I may need ?
do I need some settings in /etc/devd.conf ???

I was googeling around for two days now, and can't find any postings
about this problem.
(by the way, this camera is NOT listed in the gphoto or gtkam list)

thanks for any help
Hanno

umass0: KM DiMAGE E500, rev 1.10/0.00, addr 2
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <KM DiMAGE E500 1.10> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 122MB (250368 512 byte sectors: 64H 32S/T 122C)
umass0: Phase Error, residue = 0
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi
status == 0x0
umass0: Phase Error, residue = 0
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi
status == 0x0
umass0: Phase Error, residue = 0
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi
status == 0x0
umass0: Phase Error, residue = 0
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi
status == 0x0
umass0: Phase Error, residue = 0
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi
status == 0x0
umass0: Phase Error, residue = 0
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi
status == 0x0
umass0: Phase Error, residue = 0
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi
status == 0x0

## my /etc/rc.conf settings:
devd_enable="YES"
devfs_system_ruleset="usb_devices"
removable_interfaces="an0 cbb0 cbb1 ed0 ed1 fd0 cd0 da0"
usbd_enable="YES"
ugen_load="YES"
umass_load="YES"

## my /etc/fstab settings:
/dev/da0s1a	/mnt/camera	msdosfs	rw,noauto	0	0

## my /etc/devdf.conf settings:
perm    usb0    0660
own     usb0    root:usb
perm    usb1    0660
own     usb1    root:usb

## kernel settings:
# SCSI peripherals
device		scbus		# SCSI bus (required for SCSI)
device		ch		# SCSI media changers
device		da		# Direct Access (disks)
device		sa		# Sequential Access (tape etc)
device		cd		# CD
device		pass		# Passthrough (direct SCSI access)
device		ses		# SCSI Envir. Services (and SAF-TE)
# USB support
device		uhci		# UHCI PCI->USB interface
device		ohci		# OHCI PCI->USB interface
device		ehci		# EHCI PCI->USB interface (USB 2.0)
device		usb		# USB Bus (required)
#device		udbp		# USB Double Bulk Pipe devices
device		ugen		# Generic
device		uhid		# "Human Interface Devices"
device		ukbd		# Keyboard
device		ulpt		# Printer
device		umass		# Disks/Mass storage-Requires scbus + da
device		ums		# Mouse
device		urio		# Diamond Rio 500 MP3 player
device		uscanner	# Scanners





-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (FreeBSD)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFCvntUBG3FBOpOS2oRAp0GAJ9TpG4c9ZeiSqwGIzjQVlw99Y4ovwCdE0j9
SFsta9IycHmOOM6BceagpAc=
=5F8Y
-----END PGP SIGNATURE-----

	
	
		
___________________________________________________________ 
Yahoo! Messenger - NEW crystal clear PC to PC calling worldwide with voicemail http://uk.messenger.yahoo.com