mbmon with Tyan 2510

[Joe Kraft]

Has anyone used the sysutils/xmbmon port to get status from the Tyan 
S2510 motherboard?  I'm using FBSD 5.3.

mbmon seems to detect the system monitor chip and read it OK, but it 
doesn't report everything.

I'm only receiving one temperature value and two fan speeds.  The 
temperature appears to be the case temp. The fan speed is from one of 
the CPUs and the other from one of the case fans.

[joe at ice joe]$ mbmon -d
Using SMBus access method[ServerWorks(ServerSet Chipset)]!!
* Nat.Semi.Con. Chip LM80 found.

[joe at ice joe]$ mbmon

Temp.= 24.3,  0.0,  0.0; Rot.= 7031, 3443,    0
Vcore = 1.46, 2.79; Volt. = 3.44, 2.90,  0.63,  -0.10, -0.00

Any help you can provide to help me figure this out would be appreciated.

Joe.