howto load or install wlan_wep module on freeBSD 5.4 ?
PK
piotrekk at excite.com
Tue Aug 9 09:58:05 GMT 2005
Is the channel correct?
yes, it is, without wep works well
Do you have an active firewall that could be blocking the wireless
interface?
no, I don't have any firewall active
authmode OPEN is the problem, because ifconfig can not set to SHARED automatically or manually !
do you have authmode OPEN and you use a shared key ?
I don't thonk so.
--- On Mon 08/08, Andrew L. Gould < algould at datawok.com > wrote:
From: Andrew L. Gould [mailto: algould at datawok.com]
To: piotrekk at excite.com
Cc: freebsd-questions at freebsd.org
Date: Mon, 8 Aug 2005 20:46:29 -0500
Subject: Re: howto load or install wlan_wep module on freeBSD 5.4 ?
On Mon, 8 Aug 2005 19:58:03 -0400 (EDT)<br>"PK" <piotrekk at excite.com> wrote:<br>> <br>> hi<br>> <br>> I removed the interface conf. from the cable but still doesn't work.<br>> <br>> What's very strange is authmode OPEN:<br>> <br>> # ifconfig<br>> ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500<br>> inet 192.168.2.20 netmask 0xffffff00 broadcast 192.168.2.255<br>> inet6 fe80::20f:b5ff:fe26:d1c9%ath0 prefixlen 64 scopeid 0x1<br>> ether 00:0f:c4:12:b2:b8<br>> media: IEEE 802.11 Wireless Ethernet autoselect (DS/1Mbps)<br>> status: no carrier<br>> ssid myssid 1:myssid<br>> channel -1 authmode OPEN powersavemode OFF powersavesleep 100<br>> rtsthreshold 2312 protmode CTS<br>> wepmode MIXED weptxkey 1<br>> wepkey 1:104-bit<br>> <br>> howto change it to shared ?<br>> <br>> # ifconfig ath0 authmode shared<br>> ifconfig: SIOCS80211: Invalid argument<br><br>I also use a shared key; but
I've never had to set the mode explicitly.<br><br>Is the channel correct?<br><br>Do you have an active firewall that could be blocking the wireless<br>interface?<br><br>Andrew Gould<br>
_______________________________________________
Join Excite! - http://www.excite.com
The most personalized portal on the Web!
More information about the freebsd-questions
mailing list