howto load or install wlan_wep module on freeBSD 5.4 ?

[PK]

hi

I have wlan card WG311T from Netgear installed on freeBSD 5.4

# ifconfig
ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet 192.168.2.20 netmask 0xffffff00 broadcast 192.168.2.255
        inet6 fe80::20f:b5ff:fe26:d1c9%ath0 prefixlen 64 scopeid 0x1
        ether 00:0f:c4:12:b2:b8
        media: IEEE 802.11 Wireless Ethernet autoselect (DS/1Mbps)
        status: no carrier
        ssid myssid 1:myssid
        channel -1 authmode OPEN powersavemode OFF powersavesleep 100
        rtsthreshold 2312 protmode CTS
        wepmode MIXED weptxkey 1
        wepkey 1:104-bit
 
but it doesn't work.

I think WEP is not active ! 

in /etc/rc.conf I have:

ifconfig_ath0="inet 192.168.2.20 netmask 255.255.255.0 ssid myssid wepmode on wepkey 0xXXXXXXXXXXXXXXXXXXXXXXXXXX"
                 

it seems I'm missing wlan_wep module

# kldstat
Id Refs Address    Size     Name
 1   16 0xc0400000 5dde24   kernel
 2    1 0xc09de000 47dc     snd_via8233.ko
 3    2 0xc09e3000 1d4fc    sound.ko
 4    1 0xc0a01000 b948     if_ath.ko
 5    2 0xc0a0d000 279a8    ath_hal.ko
 6   14 0xc0a35000 56270    acpi.ko
 7    1 0xc25fc000 6000     linprocfs.ko
 8    1 0xc265b000 17000    linux.ko
 9    1 0xc2f27000 9000     ntfs.ko

howto activate or install wlan_wep module ?

piotr 




_______________________________________________
Join Excite! - http://www.excite.com
The most personalized portal on the Web!