bge0: WatchDog Timedout -- resetting in FreeBSD 5.3

nawcom nawcom at nawcom.no-ip.com
Fri Aug 5 03:47:06 GMT 2005


are you getting the error on both gigabit cards?

i know there is known interupt issues with this SMP setup, and someone i 
know who was complaining had bge's. he ended up rolling back to fxp, but 
this was in the 4.x  days.

do a vmstat -i and see if they are listed with their specific irqs
-Ben

DeadMan Xia .... wrote:

> Is there no one else, who can help me out, from this bge0: WatchDog
> Time Out -- resetting .....
>
> I m using FreeBSD 5.3, on Dell Power Edge 6650 Quad Processor Machine,
> my system get stuck while i m accessing it through ssh. well after
> some time , when i acces  the machine & check , /var/log/messages ,, i
> get  bge1: WatchDog Timedout -- resetting error. Is there any one , to
> tap my back & get me off from this headhac,,,
> Here is the dmesg for my system ,
>
> ACPI APIC Table: <DELL   PE6650  >
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Xeon(TM) MP CPU 2.20GHz (2192.90-MHz 686-class CPU)
> Origin = "GenuineIntel"  Id = 0xf26  Stepping = 6
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C 
>
> MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> Hyperthreading: 2 logical CPUs
> real memory  = 2147352576 (2047 MB)
> avail memory = 2095886336 (1998 MB)
> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
> cpu0 (BSP): APIC ID:  0
> cpu1 (AP): APIC ID:  1
> cpu2 (AP): APIC ID:  2
> cpu3 (AP): APIC ID:  3
> cpu4 (AP): APIC ID:  4
> cpu5 (AP): APIC ID:  5
> cpu6 (AP): APIC ID:  6
> cpu7 (AP): APIC ID:  7
> ioapic0: Changing APIC ID to 8
> ioapic1: Changing APIC ID to 9
> ioapic2: Changing APIC ID to 10
> MADT: Forcing active-low polarity and level trigger for SCI
> ioapic0 <Version 1.1> irqs 0-15 on motherboard
> ioapic1 <Version 1.1> irqs 16-31 on motherboard
> ioapic2 <Version 1.1> irqs 32-47 on motherboard
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <DELL PE6650> on motherboard
> acpi0: Power Button (fixed)
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> cpu2: <ACPI CPU> on acpi0
> cpu3: <ACPI CPU> on acpi0
> cpu4: <ACPI CPU> on acpi0
> cpu5: <ACPI CPU> on acpi0
> cpu6: <ACPI CPU> on acpi0
> cpu7: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> ahc0: <Adaptec aic7892 Ultra160 SCSI adapter> port 0xec00-0xecff mem 
> 0xfe102000-
> 0xfe102fff irq 16 at device 3.0 on pci0
> ahc0: [GIANT-LOCKED]
> aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
> pci0: <display, VGA> at device 4.0 (no driver attached)
> atapci0: <ServerWorks CSB5 UDMA100 controller> port 
> 0x8b0-0x8bf,0x376,0x170-0x17
> 7,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
> ata0: channel #0 on atapci0
> ata1: channel #1 on atapci0
> ohci0: <OHCI (generic) USB controller> mem 0xfe100000-0xfe100fff irq 
> 10 at devic
> e 15.2 on pci0
> ohci0: [GIANT-LOCKED]
> usb0: OHCI version 1.0, legacy support
> usb0: SMM does not respond, resetting
> usb0: <OHCI (generic) USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> isab0: <PCI-ISA bridge> at device 15.3 on pci0
> isa0: <ISA bus> on isab0
> pcib1: <ACPI Host-PCI bridge> on acpi0
> pci3: <ACPI PCI bus> on pcib1
> amr0: <LSILogic MegaRAID> mem 0xfce00000-0xfce0ffff irq 21 at device 
> 1.0 on pci3
> amr0: [GIANT-LOCKED]
> amr0: <LSILogic PERC 4/DC> Firmware 350O, BIOS 1.09, 128MB RAM
> pcib2: <ACPI Host-PCI bridge> on acpi0
> pci8: <ACPI PCI bus> on pcib2
> bge0: <Broadcom BCM5700 Gigabit Ethernet, ASIC rev. 0x7104> mem 
> 0xfcd10000-0xfcd
> 1ffff irq 17 at device 1.0 on pci8
> miibus0: <MII bus> on bge0
> brgphy0: <BCM5411 10/100/1000baseTX PHY> on miibus0
> brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
> 1000baseTX
> -FDX, auto
> bge0: Ethernet address: 00:11:43:db:68:2a
> bge1: <Broadcom BCM5700 Gigabit Ethernet, ASIC rev. 0x7104> mem 
> 0xfcd00000-0xfcd
> 0ffff irq 18 at device 2.0 on pci8
> miibus1: <MII bus> on bge1
> brgphy1: <BCM5411 10/100/1000baseTX PHY> on miibus1
> brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
> 1000baseTX
> -FDX, auto
> bge1: Ethernet address: 00:11:43:db:68:2b
> pcib3: <ACPI Host-PCI bridge> on acpi0
> pci9: <ACPI PCI bus> on pcib3
> pcib4: <ACPI Host-PCI bridge> on acpi0
> pci14: <ACPI PCI bus> on pcib4
> pcib5: <ACPI Host-PCI bridge> on acpi0
> pci19: <ACPI PCI bus> on pcib5
> pcib6: <ACPI Host-PCI bridge> on acpi0
> pci24: <ACPI PCI bus> on pcib6
> fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on 
> acpi0
> fdc0: [FAST]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 
> on acpi0
> sio0: type 16550A
> orm0: <ISA Option ROMs> at iomem 0xec000-0xeffff,0xc0000-0xc7fff on isa0
> pmtimer0 on isa0
> ppc0: parallel port not found.
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounters tick every 10.000 msec
> ipfw2 initialized, divert disabled, rule-based forwarding enabled, 
> default to de
> ny, logging unlimited
> acd0: CDRW <SAMSUNG CDRW/DVD SN-324S/U304> at ata0-master UDMA33
> Waiting 15 seconds for SCSI devices to settle
> amrd0: <LSILogic MegaRAID logical drive> on amr0
> amrd0: 69880MB (143114240 sectors) RAID 1 (optimal)
> amrd1: <LSILogic MegaRAID logical drive> on amr0
> amrd1: 139760MB (286228480 sectors) RAID 5 (optimal)
> ses0 at amr0 bus 0 target 6 lun 0
> ses0: <PE/PV 1x5 SCSI BP 1.1> Fixed Processor SCSI-2 device
> ses0: SAF-TE Compliant Device
> SMP: AP CPU #2 Launched!
> SMP: AP CPU #4 Launched!
> SMP: AP CPU #6 Launched!
> SMP: AP CPU #1 Launched!
> SMP: AP CPU #3 Launched!
> SMP: AP CPU #5 Launched!
> SMP: AP CPU #7 Launched!
> Mounting root from ufs:/dev/amrd0s1a
>
>
> DeadMan Xia ,,,,,,
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to 
> "freebsd-questions-unsubscribe at freebsd.org"
>  
>



More information about the freebsd-questions mailing list