Any 4.10 installation on asus pundit ?

Phil Schulz ph.schulz at gmx.de
Sun Jun 20 10:43:36 PDT 2004


>> my desktop machine using (I think) 4.9-Release. It started when I had 
>> to change the motherboard. The new one came w/ an SiS chipset that 
>> wasn't supported by FreeBSD. I solved the problem by adding a line to 
>> /sys/dev/ata/ata-dma.c. It worked for a few weeks w/o any problems 
>> until I switched to RELENG_5_2 for various other reasons.
>> You might want to post what chipset your mainboard uses.
>
>
> http://www.asus.com/prog/spec.asp?m=Pundit&langs=01
>  -> Chipset SIS 651/962
>  -> Lan Broadcom BCM4401
>
Try to apply the attached patch to /sys/dev/ata/ata-dma.c
Neither do I have a mainboard w/ the same chipset as yours nor do I have 
any PC running RELENG_4 atm. But I had to apply sth similar to make my 
SiS-746(?)-based mainboard work under RELENG_4. I'm not a developer so I 
don't know if it's a good and clean solution but it worked for me back then.

> In addition, I can't find the bfe0 network driver for the Broadcom 
> BCM4401 in the kernel configuration, but the 4.10 release notes told 
> the bfe should be in.
>
 From bfe(4): "The bfe device driver first appeared in FreeBSD 5.1."
-------------- next part --------------
--- ata-dma.c.old	Sun Jun 20 19:30:10 2004
+++ ata-dma.c	Sun Jun 20 19:23:41 2004
@@ -669,6 +669,7 @@
 	    ata_find_dev(parent, 0x06401039, 0) ||	/* SiS 640 */
 	    ata_find_dev(parent, 0x06451039, 0) ||	/* SiS 645 */
 	    ata_find_dev(parent, 0x06501039, 0) ||	/* SiS 650 */
+	    ata_find_dev(parent, 0x06511039, 0) ||	/* SiS 651 */
 	    ata_find_dev(parent, 0x07301039, 0) ||	/* SiS 730 */
 	    ata_find_dev(parent, 0x07331039, 0) ||	/* SiS 733 */
 	    ata_find_dev(parent, 0x07351039, 0) ||	/* SiS 735 */


More information about the freebsd-questions mailing list