Intel ICH5 SATA controler on FreeBSD 5.3

[Mail Admin]

Hi,

I have it working, though could not manage to get the hardware RAID going:

atapci0: <Intel ICH5 UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0

atapci1: <Intel ICH5 SATA150 controller> port 0xdc00-0xdc0f,0xe000-0xe003,0xe400-0xe407,0xe800-0xe803,0xec00-0xec07 irq 18 at device 31.2 on pci0
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1

acd0: CDRW <HL-DT-ST GCE-8160B/1.02> at ata0-master PIO4
ad4: 78167MB <Maxtor 6Y080M0/YAR51BW0> [158816/16/63] at ata2-master SATA150
ad6: 78167MB <Maxtor 6Y080M0/YAR51BW0> [158816/16/63] at ata3-master SATA150

NB if you recompile your kernel leave ATA_STATIC_ID in.

Regards,
Nigel.


Mário Gamito wrote:
> Hi,
> 
> Searching in the hardware suported by 5.3 i see no (obvious) reference 
> to Intel ICH5 SATA disk controler.
> 
> But googling for "intel ich5 freebsd", there are lots os links about 
> this issue.
> Some talk about patches, even in this list, several months before 5.3
> 
> In the end, i do not know if this controler is or isn't suported 
> natively by FreeBSD 5.3, and if not, how can one make it work.
> 
> Any help would be apreciated.
> I have a server to re-install from Linux to FreeBSD tomorrow :(
> 
> Warm Regards.