pppd (Server)

[JJB]

As you have found out pppd is very hard to configure and debug,
that's why it was re-written along time ago
and is now called "user ppp".

Read man ppp  for details on how to config and use.
That's what is most commonly used today.


-----Original Message-----
From: owner-freebsd-questions at freebsd.org
[mailto:owner-freebsd-questions at freebsd.org]On Behalf Of gffds fsdff
Sent: Thursday, April 08, 2004 7:26 PM
To: questions at FreeBSD.org
Subject: pppd (Server)

I have downloaded and installed kermit, typed in the configuration
as listed
in "18.3.3". When I try to run pppd with no setting options, I get
this:

192# pppd
~ÿ}#À!}!}!} }.}%}&}2z¢;}'}"}(}" C~~ÿ}#À!}!}!} }.}%}&}2z¢;}'}"}(}"
C~~ÿ}#À!}!}!} }.}%}&}2z¢;}'}"}(}" C~~ÿ}#À!}!}!} }.}%}&}2z¢;}'}"}(}"
C~~ÿ}#À!}!}!} }.}%}&}2z¢;}'}"}(}" C~~ÿ}#À!}!}!} }.}%}&}2z¢;}'}"}(}"
C~~ÿ}#À!}!}!} }.}%}&}2z¢;}'}"}(}" C~~ÿ}#À!}!}!} }.}%}&}2z¢;}'}"}(}"
C~~ÿ}#À!}!}!} }.}%}&}2z¢;}'}"}(}" C~~ÿ}#À!}!}!} }.}%}&}2z¢;}'}"}(}"
C~


When I try to run pppd with terminal options, they are somehow
improper. I
do not know where to set the device for listening (I want to use a
v.92/56k
modem), in kermit.dial, I know I am supposed to change the username
and
password, but I do not understand how it is to be done.

As for my configurations, here you go:









----------------------------------------------------Kermit.ans------
-----------------------------------------------
set line /dev/tty01
set speed 19200
set file type binary
set file names literal
set win 8
set rec pack 1024
set send pack 1024
set block 3
set term bytesize 8
set command bytesize 8
set flow none

pau 1
out +++
inp 5 OK
out ATH0\13
inp 5 OK
echo \13
out ATS0=1\13   ; change to ATS0=0\13 if you want to disable
autoanswer
mode.
inp 5 OK
echo \13
exit
--------------------------------------------------------------------
---------------------------------------------------



----------------------------------------------------Kermit.dial-----
------------------------------------------------
set line /dev/tty01
set speed 19200
set file type binary
set file names literal
set win 8
set rec pack 1024
set send pack 1024
set block 3
set term bytesize 8
set command bytesize 8
set flow none
set modem hayes
set dial hangup off
set carrier auto
set dial display on
set input echo on
set input timeout proceed
set input case ignore
def \%x 0
goto slhup

:slcmd
echo Put the modem in command mode.
clear
pause 1
output +++
input 1 OK\13\10
if success goto slhup
output \13
pause 1
output at\13
input 1 OK\13\10
if fail goto slcmd

:slhup
clear
pause 1
echo Hanging up the phone.
output ath0\13
input 2 OK\13\10
if fail goto slcmd

:sldial
pause 1
echo Dialing.
output atdt9,550311\13\10
assign \%x 0

:look
clear
increment \%x
input 1 {CONNECT }
if success goto sllogin
reinput 1 {NO CARRIER\13\10}
if success goto sldial
reinput 1 {NO DIALTONE\13\10}
if success goto slnodial
reinput 1 {\255}
if success goto slhup
reinput 1 {\127}
if success goto slhup
if < \%x 60 goto look
else goto slhup

:sllogin
assign \%x 0
pause 1
echo Looking for login prompt.

:slloop increment \%x
clear
output \13
input 1 {Username: }
if success goto sluid
reinput 1 {\255}
if success goto slhup
reinput 1 {\127}
if success goto slhup
if < \%x 10 goto slloop
else goto slhup

:sluid
output ppp-login\13
input 1 {Password: }
output ppp-password\13
input 1 {Entering SLIP mode.}
echo
quit

:slnodial
echo \7No dialtone. Check the telephone line!\7
exit 1

; local variables:
; mode: csh
; comment-start: "; "
; comment-start-skip: "; "
; end:
--------------------------------------------------------------------
-----------------------------------------------

----------------------------------------------------options---------
--------------------------------------------
crtscts
netmask 255.255.255.0
domain ppp.solodox.com
passive
modem
--------------------------------------------------------------------
-----------------------------------------------

---------------------------------------------------pppserv----------
-------------------------------------------
#!/bin/sh
ps ax |grep pppd |grep -v grep
pid=`ps ax |grep pppd |grep -v grep|awk '{print $1;}'`
if [ "X${pid}" != "X" ] ; then
        echo 'killing pppd, PID=' ${pid}
        kill ${pid}
fi
ps ax |grep kermit |grep -v grep
pid=`ps ax |grep kermit |grep -v grep|awk '{print $1;}'`
if [ "X${pid}" != "X" ] ; then
        echo 'killing kermit, PID=' ${pid}
        kill -9 ${pid}
fi

#reset ppp interface
ifconfig ppp0 down
ifconfig ppp0 delete

#enable autoanswer mode
kermit -y /etc/ppp/kermit.ans

#run ppp
pppd /dev/tty01 19200
--------------------------------------------------------------------
-----------------------------------------------

------------------------------------------------pppservdown---------
----------------------------------------
#!/bin/sh
ps ax |grep pppd |grep -v grep
pid=`ps ax |grep pppd |grep -v grep|awk '{print $1;}'`
if [ "X${pid}" != "X" ] ; then
        echo 'killing pppd, PID=' ${pid}
        kill ${pid}
fi
ps ax |grep kermit |grep -v grep
pid=`ps ax |grep kermit |grep -v grep|awk '{print $1;}'`
if [ "X${pid}" != "X" ] ; then
        echo 'killing kermit, PID=' ${pid}
        kill -9 ${pid}
fi
ifconfig ppp0 down
ifconfig ppp0 delete

kermit -y /etc/ppp/kermit.noans
--------------------------------------------------------------------
-----------------------------------------------

So there you are, thanks for reading. I would appriciate any help
you may be
willing to give. Thank you.

_________________________________________________________________
MSN Toolbar provides one-click access to Hotmail from any Web page -
FREE
download! http://toolbar.msn.com/go/onm00200413ave/direct/01/

_______________________________________________
freebsd-questions at freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
"freebsd-questions-unsubscribe at freebsd.org"