Install Trouble

[Tim Hawes]

OK,

I disabled the serial ports and the install went fine. I did not need to
disable plug and play. I am now having difficulty getting the ethernet
card working

It seems to detect that I have a RealTek 8139  card (which is correct).
Here is what dmesg returns:

rl0: <RealTek 8139 10/100BaseTX> port 0xec00-0xecff mem
0xd3001000-0xd30010ff irq 11 at device 15.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect
mode
rl0: couldn't map interrupt
device_probe_and_attach: rl0 attach returned 6

I also noticed this just before the ethernet card:
pci0: <multimedia, audio> at device 2.7 (no driver attached)
sio0: <SmartLink 5634PCV SurfRider> port 0xe800-0xe807 irq 11 at device
7.0 on pci0
sio0: moving to sio4
sio4: type 16550A

So, I guess FreeBSD does not do plug and play, and what I have is an irq
conflict?