FreeBSD and Hot Swap rebuild on SCSI disks.

[Micheal Patterson]

----- Original Message ----- 
From: "Edy Lie" <email at edylie.net>
To: "Micheal Patterson" <micheal at tsgincorporated.com>
Cc: <freebsd-questions at freebsd.org>
Sent: Wednesday, September 10, 2003 9:05 AM
Subject: Re: FreeBSD and Hot Swap rebuild on SCSI disks.


> Hi Michael,
>
> Thanks for the reply. I have tried to search raidutil in /usr/ports but
> i could not find any.
>
> Is that in FreeBSD ports or do i need to compile it manually from
> somewhere ?
>
> Thank you.
> Best Regards,
> Edy Lie

It's an Adaptec provided utility with precompiled binaries. Here's the link:

http://www.adaptec.com/worldwide/support/driversbycat.html?sess=no&language=English+US&cat=%2fOperating+System%2fFreeBSD

Since that link will wrap, if it won't work after you enter it manually,
here's the long route. Go to http://www.adaptec.com, go to Support >
Downloads. In the 2nd section, go to FreeBSD. The manager for the 2100S,
3200S, and 3400S  will be the bottom link.

--

Micheal Patterson
TSG Network Administration
405-917-0600

Confidentiality Notice:  This e-mail message, including any attachments, is
for the sole use of the intended recipient(s) and may contain confidential
and privileged information. Any unauthorized review, use, disclosure or
distribution is prohibited. If you are not the intended recipient, please
contact the sender by reply e-mail and destroy all copies of the original
message.