Philips JackRabbit USB Burner Question

[Chris]

Hiya people,

	I used a Philips Jack Rabbit USB CD-R/RW under Winders2k, I pooped this bad 
boy onto my 4.8 install and here are some lines from my dmesg -


usb0: <Intel 82801AA (ICH) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: PHILIPS USB Storage Device        , rev 2.00/11.06, addr 2
pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 10
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff on isa0

	The question is simply, can I use this? If so, what would the suggested 
device be? After looking at the /dev/MAKEDEV file, here's what I might guess:

# USB devices:
#       usb*    USB bus control device
#       ucom*   USB serial devices
#       ugen*   generic USB device
#       uhid*   Human Interface Device (HID)
#       ulpt*   printer
#       umodem* modems
#       ums*    mouse
#       urio*   Diamond Rio 500
#       uscanner* USB scanners


	Perhaps a MAKEDEV usgen0 might work?

-- 

Best regards,
                 Chris
______________________________________________________________________

PGP Fingerprint = D976 2575 D0B4 E4B0 45CC AA09 0F93 FF80 C01B C363

PGP Mail encouraged / preferred - keys available on common key servers
______________________________________________________________________
       01010010011000010110001101100101011100100101100000000000