PNP ISA Modem Motorola Premier 33.6 Internal can't install

[maxim]

Hello,

I have PNP ISA modem, programe pnpinfo write out:
Checking for Plug-n-Play devices...

Card assigned CSN #1
Vendor ID MOT1580 (0x8015f435), Serial Number 0x19647968
PnP Version 1.0, Vendor Version 0
Device Description: Motorola Premier 33.6 Internal

Logical Device ID: MOT1580 0x8015f435 #0
        Device supports I/O Range Check
TAG Start DF
    I/O Range 0x3e8 .. 0x3e8, alignment 0x8, len 0x8
        [not 16-bit addr]
    IRQ: 3 4 5 7  - only one type (true/edge)
TAG Start DF
    I/O Range 0x2e8 .. 0x2e8, alignment 0x8, len 0x8
        [not 16-bit addr]
    IRQ: 3 4 5 7  - only one type (true/edge)
TAG Start DF
    I/O Range 0x3f8 .. 0x3f8, alignment 0x8, len 0x8
        [not 16-bit addr]
    IRQ: 4  - only one type (true/edge)
TAG Start DF
    I/O Range 0x2f8 .. 0x2f8, alignment 0x8, len 0x8
        [not 16-bit addr]
    IRQ: 3  - only one type (true/edge)
TAG Start DF
    I/O Range 0x2e8 .. 0x2e8, alignment 0x8, len 0x8
        [not 16-bit addr]
    IRQ: 10 11 12 15  - only one type (true/edge)
TAG Start DF
    I/O Range 0x3e8 .. 0x3e8, alignment 0x8, len 0x8
        [not 16-bit addr]
    IRQ: 10 11 12 15  - only one type (true/edge)
TAG Start DF
    I/O Range 0x0 .. 0x3f8, alignment 0x8, len 0x8
        [not 16-bit addr]
    IRQ: 3 4 5 7  - only one type (true/edge)
TAG Start DF
    I/O Range 0x0 .. 0x3f8, alignment 0x8, len 0x8
        [not 16-bit addr]
    IRQ: 10 11 12 15  - only one type (true/edge)
TAG End DF
End Tag

Successfully got 28 resources, 1 logical fdevs
-- card select # 0x0001

CSN MOT1580 (0x8015f435), Serial Number 0x19647968

Logical device #0
IO:  0x03e8 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 3 0
DMA 4 0
IO range check 0x00 activate 0x01

But I can't see new sio device.
How can I solve the problem?
How does FreeBSD configurate PNP isa devices?

Kind Regards,
Maxim Maslennikov.