Disklabel problem IBM SCSI3 disks, vinum too

[Greg 'groggy' Lehey]

[Format recovered--see http://www.lemis.com/email/email-format.html]

Quotation broken.

On Friday, 21 November 2003 at  9:25:58 -0500, Bob Collins wrote:
> At 08:41 PM 11/19/2003, Greg 'groggy' Lehey wrote:
>> [Format recovered--see http://www.lemis.com/email/email-format.html]
>>
>> Quotation broken.
>>
>> On Wednesday, 19 November 2003 at  9:13:43 -0500, Bob Collins wrote:
>>> At 10:46 PM 11/17/2003, Greg 'groggy' Lehey wrote:
>>>>
>>>> Do you have device nodes for da4?  Has it been labelled at all?
>>>
>>> I did not have `all' the nodes for da4 in /dev. So, I ran #sh MAKEDEV da4
>>> in the /dev directory. After that, there were what appeared to be all the
>>> device nodes for da4.
>>>
>>> I was able to label the drive and use it with vinum under
>>> 5.0-RELEASE FWIW.  Under 4.9-RELEASE (which is what I now run) it
>>> will not label through /stand/sysinstall.
>>>
>>> I can now newfs the drive and mount it and copy files to and fro,
>>> however I cannot use it with vinum. I did umount the drive and
>>> then disklabel -e da4 and changed the e: to h: and the filesystem
>>> type to vinum. It was da4s1e.
>>>
>>> When I create the vinum configuration, I either get that drive d
>>> (da4s1h) is referenced and in the down state while the other three
>>> drives are up, or the other three drives a b c are referenced and
>>> in the down state while drive d is up.
>>
>> I need the information I ask for in
>> http://www.vinumvm.org/vinum/how-to-debug.html.
>
> FreeBSD 4.9 RELEASE
>
> No changes to sources
>
> vinum -> list
> 4 drives:
> D d                     State: up       Device /dev/da1s1h      Avail: 0/8747 MB (0%)
> D c                     State: up       Device /dev/da2s1h      Avail: 0/8747 MB (0%)
> D b                     State: up       Device /dev/da3s1h      Avail: 0/8747 MB (0%)
> D a                     State: up       Device /dev/da4s1h      Avail: 0/8747 MB (0%)
>
> 1 volumes:
> V raid                  State: down     Plexes:       1 Size:         25 GB
>
> 1 plexes:
> P raid.p0            R5 State: init     Subdisks:     4 Size:         25 GB
>
> 4 subdisks:
> S raid.p0.s0            State: empty    PO:        0  B Size:       8747 MB
> S raid.p0.s1            State: empty    PO:      512 kB Size:       8747 MB
> S raid.p0.s2            State: empty    PO:     1024 kB Size:       8747 MB
> S raid.p0.s3            State: empty    PO:     1536 kB Size:       8747 MB

This doesn't agree with what you say above.  It also looks fine to
me.

Greg
--
When replying to this message, please copy the original recipients.
If you don't, I may ignore the reply or reply to the original recipients.
For more information, see http://www.lemis.com/questions.html
See complete headers for address and phone numbers.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-questions/attachments/20031122/3e94ec21/attachment.bin