Sound card

[Cordula's Web]

> b# pnpinfo
> Checking for Plug-n-Play devices...
> 
> Card assigned CSN #1
> Vendor ID CSC6835 (0x3568630e), Serial Number 0xffffffff
> PnP Version 1.0, Vendor Version 1
> Device Description: CS4236B
> 
> Logical Device ID: CSC0000 0x0000630e #0
> Device Description: WSS/SB

Okay, that's a sound blaster or SB compatible card. Should work
with the pcm(4) driver; perhaps also with sbc(4). You're running
a GENERIC kernel, right?

After "kldload snd", have you tried a few sound apps?
Don't forget to set acceptable values for volume and pcm
with the 'mixer' program, if you want to hear something.

> TAG Start DF
> Good Configuration
>     DMA: channel(s) 1 3
>         8-bit, not a bus master, count by byte, , Type A
>     DMA: channel(s) 0 1 3
>         8-bit, not a bus master, count by byte, , Type A
>     IRQ: 5 7 9  - only one type (true/edge)
>     I/O Range 0x534 .. 0x608, alignment 0xd4, len 0x4
>         [16-bit addr]
>     I/O Range 0x388 .. 0x388, alignment 0x8, len 0x4
>         [16-bit addr]
>     I/O Range 0x220 .. 0x240, alignment 0x20, len 0x10
>         [16-bit addr]
> TAG Start DF
> Acceptable Configuration
>     DMA: channel(s) 0 1 3
>         8-bit, not a bus master, count by byte, , Type A
>     IRQ: 5 7 9 11 12 15  - only one type (true/edge)
>     I/O Range 0x534 .. 0xffc, alignment 0x4, len 0x4
>         [16-bit addr]
>     I/O Range 0x388 .. 0x3f0, alignment 0x8, len 0x4
>         [16-bit addr]
>     I/O Range 0x220 .. 0x260, alignment 0x10, len 0x10
>         [16-bit addr]
> TAG End DF



-- 
Cordula's Web. http://www.cordula.ws/