ssh ilo question

[jmc]

For iLO remcons sessions, your terminal emulator (e.g. PuTTY) should have
the following settings:

  Backspace - Generates Control-H
  Function Keys - VT100+
  Window Size -  25 ROWS by 80 columns (This is key)
  Character Set Translation - CP437

Please let me know if this helps.  By the way, if your system has iLO-2
(beginning in 2006) the REMCONS command no longer works -- you should
transition to using VSP (Virtual Serial Port) instead.  The iLO-2 BMC now
uses a "DVI" like connection to the video controller which means it no
longer can "screen-scrape" the text console.  I recommend setting the iLO
VSP to COM1 to make it easier to use for the FreeBSD console.  (This is the
default on BladeSystem blades since they don't have a real COM1 port.)

John

On 9/12/06, brad miele <bmiele at ipnstock.com> wrote:
>
> Hi,
>
> I apologize if this has been gone over before. when i ssh to my machines
> and run remcons, i get a situation where every command and response ends
> up on the same line.
>
> what is the fix for this?
>
> Brad
> ---------------------
> Brad Miele
> VP Technology
> IPNStock.com
> 866 476 7862 x902
> bmiele at ipnstock.com
> _______________________________________________
> freebsd-proliant at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-proliant
> To unsubscribe, send any mail to "freebsd-proliant-unsubscribe at freebsd.org
> "
>