fan funning high on base system

Tue Jul 14 02:56:50 UTC 2015

I am downloading 11 current

On Mon, Jul 13, 2015 at 9:50 PM, Herminio Hernandez, Jr. <
herminio.hernandezjr at gmail.com> wrote:

> I would like to file a bug report on this but I am not sure what I would
> file it against...
>
> On Mon, Jul 13, 2015 at 9:49 PM, Herminio Hernandez, Jr. <
> herminio.hernandezjr at gmail.com> wrote:
>
>> I am running 10.1 where do I get 11 current? I am thinking it is a bug
>> cause while dmesg is giving me those warnings I am getting this in sysctl
>>
>> $ sudo sysctl -a |grep adt746x
>> device    adt746x
>> dev.adt746x.%parent:
>> dev.adt746x.0.%desc: Apple Thermostat Unit ADT746X
>> dev.adt746x.0.%driver: adt746x
>> dev.adt746x.0.%location: addr=0x5c
>> dev.adt746x.0.%pnpinfo: name=fan compat=adt7467
>> dev.adt746x.0.%parent: iicbus0
>> dev.adt746x.0.fans.main_enclosure.pwm: 5
>> dev.adt746x.0.sensors.cpu_core.volt: 191
>> dev.adt746x.0.sensors.pwr/memory_bottomside.temp: 32.0C
>> dev.adt746x.0.sensors.cpu_bottomside.temp: 32.0C
>> dev.adt746x.0.sensors.gpu_bottomside.temp: 35.0C
>> dev.adt746x.0.sensors.rear_main_enclosure.rpm: 7616
>>
>>
>> On Mon, Jul 13, 2015 at 9:35 PM, Justin Hibbits <jrh29 at alumni.cwru.edu>
>> wrote:
>>
>>> Hi Herminio,
>>>
>>> Are you running 10.x?  If so, could you try again with 11-CURRENT?  I
>>> fixed a sign bug a few months ago, but haven't MFC'd it (or a host of
>>> other bugfixes), so that may fix your problem.
>>>
>>> - Justin
>>>
>>> On Mon, Jul 13, 2015 at 7:29 PM, Herminio Hernandez, Jr.
>>> <herminio.hernandezjr at gmail.com> wrote:
>>> > Justin,
>>> >
>>> > Right now I have openbox running, but my fan is going crazy with the
>>> system
>>> > on idle. My machine is not hot at all but I am seeing this in dmeg,
>>> >
>>> > WARNING: Current temperature (GPU BOTTOMSIDE: 255.0 C) exceeds critical
>>> > temperature (80.0 C); count=1
>>> > WARNING: Current temperature (GPU BOTTOMSIDE: 255.0 C) exceeds critical
>>> > temperature (80.0 C); count=1
>>> > WARNING: Current temperature (PWR/MEMORY BOTTOMSIDE: 255.0 C) exceeds
>>> > critical temperature (80.0 C); count=1
>>> > WARNING: Current temperature (PWR/MEMORY BOTTOMSIDE: 255.0 C) exceeds
>>> > critical temperature (80.0 C); count=1
>>> > WARNING: Current temperature (GPU BOTTOMSIDE: 255.0 C) exceeds critical
>>> > temperature (80.0 C); count=1
>>> > WARNING: Current temperature (GPU BOTTOMSIDE: 255.0 C) exceeds critical
>>> > temperature (80.0 C); count=1
>>> > WARNING: Current temperature (GPU BOTTOMSIDE: 255.0 C) exceeds critical
>>> > temperature (80.0 C); count=1
>>> > WARNING: Current temperature (GPU BOTTOMSIDE: 255.0 C) exceeds critical
>>> > temperature (80.0 C); count=1
>>> > WARNING: Current temperature (CPU BOTTOMSIDE: 255.0 C) exceeds critical
>>> > temperature (80.0 C); count=1
>>> > WARNING: Current temperature (GPU BOTTOMSIDE: 255.0 C) exceeds critical
>>> > temperature (80.0 C); count=1
>>> > WARNING: Current temperature (GPU BOTTOMSIDE: 255.0 C) exceeds critical
>>> > temperature (80.0 C); count=1
>>> > WARNING: Current temperature (PWR/MEMORY BOTTOMSIDE: 255.0 C) exceeds
>>> > critical temperature (80.0 C); count=1
>>> > WARNING: Current temperature (GPU BOTTOMSIDE: 255.0 C) exceeds critical
>>> > temperature (80.0 C); count=1
>>> > WARNING: Current temperature (GPU BOTTOMSIDE: 255.0 C) exceeds critical
>>> > temperature (80.0 C); count=1
>>> > WARNING: Current temperature (GPU BOTTOMSIDE: 255.0 C) exceeds critical
>>> > temperature (80.0 C); count=1
>>> > WARNING: Current temperature (PWR/MEMORY BOTTOMSIDE: 255.0 C) exceeds
>>> > critical temperature (80.0 C); count=1
>>> > WARNING: Current temperature (GPU BOTTOMSIDE: 255.0 C) exceeds critical
>>> > temperature (80.0 C); count=1
>>> > WARNING: Current temperature (GPU BOTTOMSIDE: 255.0 C) exceeds critical
>>> > temperature (80.0 C); count=1
>>> > $
>>> >
>>> >
>>> > On Sun, Jul 12, 2015 at 10:01 PM, Herminio Hernandez Jr.
>>> > <herminio.hernandezjr at gmail.com> wrote:
>>> >>
>>> >> Once I finished building Xorg and my video drivers, I did a reboot.
>>> Then
>>> >> logged in again and started X. All was good and my fans were quiet.
>>> Now on
>>> >> to build my DE!
>>> >>
>>> >> Sent from my iPhone
>>> >>
>>> >> On Jul 12, 2015, at 12:31 PM, Justin Hibbits <jrh29 at alumni.cwru.edu>
>>> >> wrote:
>>> >>
>>> >> Hi,
>>> >>
>>> >> On Jul 12, 2015 8:17 AM, "Herminio Hernandez Jr"
>>> >> <herminio.hernandezjr at gmail.com> wrote:
>>> >> >
>>> >> > I have the base system installed on my iBook G4, but the fans are
>>> >> > running like crazy. During the install I selected the powerd
>>> service to
>>> >> > control cpu scaling, but I am not sure if it is working. It could
>>> since I am
>>> >> > installing the port for xorg I just to be sure that there is not
>>> another
>>> >> > port I need to install to manage cpu and fans on powerpc. Thanks!
>>> >> >
>>> >> > --
>>> >> > Herminio Hernandez Jr <herminio.hernandezjr at gmail.com>
>>> >>
>>> >> The fans should be temperature controlled, which can be disabled
>>> through
>>> >> the machdep.manage_fans sysctl. All temperatures and fan speeds can
>>> be seen
>>> >> with sysctl as well. I think the iBook uses the adt746x, but you can
>>> just
>>> >> grep for 'temp', 'pwm', and 'rpm' for the data, maybe a sensor is
>>> finding a
>>> >> really high temperature. If you're building anything the temperature
>>> does
>>> >> sound and the fans go nuts, but afterwards they should quiet down.
>>> >>
>>> >> -Justin
>>> >
>>> >
>>>
>>
>>
>