fan funning high on base system

[Herminio Hernandez Jr.]

Once I finished building Xorg and my video drivers, I did a reboot. Then logged in again and started X. All was good and my fans were quiet. Now on to build my DE!

Sent from my iPhone

> On Jul 12, 2015, at 12:31 PM, Justin Hibbits <jrh29 at alumni.cwru.edu> wrote:
> 
> Hi,
> 
> On Jul 12, 2015 8:17 AM, "Herminio Hernandez Jr" <herminio.hernandezjr at gmail.com> wrote:
> >
> > I have the base system installed on my iBook G4, but the fans are running like crazy. During the install I selected the powerd service to control cpu scaling, but I am not sure if it is working. It could since I am installing the port for xorg I just to be sure that there is not another port I need to install to manage cpu and fans on powerpc. Thanks!
> >
> > --
> > Herminio Hernandez Jr <herminio.hernandezjr at gmail.com>
> 
> The fans should be temperature controlled, which can be disabled through the machdep.manage_fans sysctl. All temperatures and fan speeds can be seen with sysctl as well. I think the iBook uses the adt746x, but you can just grep for 'temp', 'pwm', and 'rpm' for the data, maybe a sensor is finding a really high temperature. If you're building anything the temperature does sound and the fans go nuts, but afterwards they should quiet down.
> 
> -Justin