[Bug 193628] Marvell 88W8335 wireless NIC not enabled by malo(4) or ndis(4)

[bugzilla-noreply at freebsd.org]

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=193628

--- Comment #2 from Juan Ramón Molina Menor <listjm at club.fr> ---
Hi Carlos.

It works! I applied your patch to the port, changed the PCI slot, reboot and
the card is working well. I don’t understand what happened before, I have
already tested all three free slots.

Nevertheless, I have some "need multicast update callback" messages on dmesg:

% dmesg -a | grep malo
malo0: <Marvell Libertas 88W8335 802.11g Wireless Adapter> mem
0xeb000000-0xeb00fff,0xeb010000-0xeb01ffff irq 19 at device 8.0 on pci0
malo0: load malo8335-h firmware image (256 bytes)
malo0: load malo8335-m firmware image (122624 bytes)
malo0: versions [hw 1 fw 3.0.0.39] (regioncode 16)
Starting Network: lo0 sis0 malo0.
malo0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
malo0: need multicast update callback
malo0: need multicast update callback
malo0: need multicast update callback

% pciconf -lv
malo0 at pci0:0:8:0:       class=0x020000 card=0x1faa11ab chip=0x1faa11ab rev=0x03
hdrr0x00
    vendor     = 'Marvell Technology Group Ltd.'
    device     = '88w8335 [Libertas] 802.11b/g Wireless'
    class      = network
    subclass   = ethernet

Thank you very much, I was about returning the card to the shop!

Best regards,
Juan

P.S.: I am at your disposal to further test the driver. Also, I’m opening a new
PR suggesting to improve a bit the malo(4) man page.

-- 
You are receiving this mail because:
You are the assignee for the bug.