ports/140347: security/dirmngr needs updated BUILD_DEPENDS requirements

[Craig Green]

>Number:         140347
>Category:       ports
>Synopsis:       security/dirmngr needs updated BUILD_DEPENDS requirements
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    freebsd-ports-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          update
>Submitter-Id:   current-users
>Arrival-Date:   Fri Nov 06 20:30:01 UTC 2009
>Closed-Date:
>Last-Modified:
>Originator:     Craig Green
>Release:        RELENG_6
>Organization:
Sentex Communications
>Environment:
>Description:

I ran into trouble installing the dirmngr 1.0.3 port today.  Configure died when it claimed that libassuan needed to be installed:

--------------------------

configure:
***
*** You need libassuan to build this program.
*** This library is for example available at
***   ftp://ftp.gnupg.org/pub/gcrypt/libassuan/
*** (at least version 1.0.4 is required).
*** Note, that libassuan must have been build with Pth support.
***
configure: error:
***
*** Required libraries not found. Please consult the above messages
*** and install them before running configure again.
***
===>  Script "configure" failed unexpectedly.
Please report the problem to umq at ueo.co.jp [maintainer] and attach the
"/usr/ports/security/dirmngr/work/dirmngr-1.0.3/config.log" including the
output of the failure of your make command. Also, it might be a good idea to
provide an overview of all packages installed on your system (e.g. an `ls
/var/db/pkg`).
*** Error code 1


--------------------------


However, libassuan actually is installed:


--------------------------

cgreen:Jade:/usr/ports/security/dirmngr# pkg_info | grep libass
libassuan-1.0.1     IPC library used by GnuPG and gpgme

--------------------------


The port Makefile also detects it:


--------------------------


cgreen:Jade:/usr/ports/security/dirmngr# make
===>  Extracting for dirmngr-1.0.3
=> MD5 Checksum OK for dirmngr-1.0.3.tar.bz2.
=> SHA256 Checksum OK for dirmngr-1.0.3.tar.bz2.
===>  Patching for dirmngr-1.0.3
===>   dirmngr-1.0.3 depends on file: /usr/local/lib/libassuan.a - found
===>   dirmngr-1.0.3 depends on executable: gmake - found
===>   dirmngr-1.0.3 depends on shared library: gcrypt.16 - found
===>   dirmngr-1.0.3 depends on shared library: gpg-error.0 - found


--------------------------


Peeking at the port's Makefile shows just a generic, non-version specific BUILD_DEPENDS line:


--------------------------

BUILD_DEPENDS=  ${LOCALBASE}/lib/libassuan.a:${PORTSDIR}/security/libassuan


--------------------------


>How-To-Repeat:

>Fix:
Looks like you need to update the port to check for a version of libassuan greater than or equal to 1.0.4, as dirmngr's configure states.


e.g.

BUILD_DEPENDS=  libassuan>=1.0.4:${PORTSDIR}/security/libassuan


If I make that modification to the Makefile, the dirmngr install will error out when I only have version 1.0.1 of libassuan installed, and install successfully after I upgrade to 1.0.5 of libassuan.

Patch attached with submission follows:

diff -ruN dirmngr.orig/Makefile dirmngr/Makefile
--- dirmngr.orig/Makefile	2009-06-17 17:29:22.000000000 -0400
+++ dirmngr/Makefile	2009-11-06 15:16:40.000000000 -0500
@@ -14,7 +14,7 @@
 MAINTAINER=	umq at ueo.co.jp
 COMMENT=	A client for managing and downloading certificate revocation lists
 
-BUILD_DEPENDS=	${LOCALBASE}/lib/libassuan.a:${PORTSDIR}/security/libassuan
+BUILD_DEPENDS=	libassuan>=1.0.4:${PORTSDIR}/security/libassuan
 LIB_DEPENDS=	gcrypt.16:${PORTSDIR}/security/libgcrypt \
 		gpg-error.0:${PORTSDIR}/security/libgpg-error \
 		ksba.17:${PORTSDIR}/security/libksba \


>Release-Note:
>Audit-Trail:
>Unformatted: