ports/128547: [new port] x11-drivers/xf86-input-wacom

Sun Nov 2 23:10:03 UTC 2008

The following reply was made to PR ports/128547; it has been noted by GNATS.

From: Dominic Fandrey <kamikaze at bsdforen.de>
To: bug-followup at FreeBSD.org
Cc:  
Subject: Re: ports/128547: [new port] x11-drivers/xf86-input-wacom
Date: Sun, 02 Nov 2008 23:39:13 +0100

 Bartosz Fabianowski has decided to add version numbers to the
 distfile, so here is the updated shar archive.

 # This is a shell archive.  Save it in a file, remove anything before
 # this line, and then unpack it by entering "sh file".  Note, it may
 # create directories; files and directories will be owned by you and
 # have default permissions.
 #
 # This archive contains:
 #
 #	ports/x11-drivers/xf86-input-wacom
 #	ports/x11-drivers/xf86-input-wacom/Makefile
 #	ports/x11-drivers/xf86-input-wacom/distinfo
 #	ports/x11-drivers/xf86-input-wacom/pkg-descr
 #	ports/x11-drivers/xf86-input-wacom/files
 #	ports/x11-drivers/xf86-input-wacom/files/wacom.in
 #	ports/x11-drivers/xf86-input-wacom/pkg-plist
 #	ports/x11-drivers/xf86-input-wacom/pkg-message
 #
 echo c - ports/x11-drivers/xf86-input-wacom
 mkdir -p ports/x11-drivers/xf86-input-wacom > /dev/null 2>&1
 echo x - ports/x11-drivers/xf86-input-wacom/Makefile
 sed 's/^X//' >ports/x11-drivers/xf86-input-wacom/Makefile << '2c8ac90824175dfffa7ed05f34e7748e'
 X# New ports collection makefile for:	xf86-input-wacom
 X# Date Created:				24 Oct 2008
 X# Whom:					Dominic Fandrey <kamikaze at bsdforen.de>
 X#
 X# $FreeBSD$
 X#
 X
 XPORTNAME=	xf86-input-wacom
 XPORTVERSION=	${WACOM_VERSION:C/-/./g}.${KLD_VERSION}
 XCATEGORIES=	x11-drivers kld
 XMASTER_SITES=	http://www.chillt.de/bsdwacom/ \
 X		${MASTER_SITE_SOURCEFORGE}
 XMASTER_SITE_SUBDIR=	linuxwacom
 XDISTFILES=	${BSDWACOM}.tbz \
 X		${LINUXWACOM}.tar.bz2
 XEXTRACT_ONLY=	${BSDWACOM}.tbz
 X
 XMAINTAINER=	kamikaze at bsdforen.de
 XCOMMENT=	X.Org Wacom tablet driver and kernel module
 X
 XMAN4=		wacom.4x
 XMANCOMPRESSED=	yes
 X
 XUSE_GMAKE=	yes
 XUSE_RC_SUBR=	wacom
 X
 XPLIST_SUB=	DESTDIR=${DESTDIR}
 X
 XXORG_CAT=	driver
 X
 XLINUXWACOM=	linuxwacom-${WACOM_VERSION}
 XBSDWACOM=	bsdwacom-${KLD_VERSION}
 XWACOM_VERSION=	0.8.1-3
 XKLD_VERSION=	35
 X
 Xdo-configure:
 X	@cd ${WRKDIR}/linuxwacom \
 X		&& ${LN} -s ${DISTDIR}/${LINUXWACOM}.tar.bz2 \
 X		&& ./run_configure
 X
 Xdo-build:
 X	@cd ${WRKDIR}/uwacom \
 X		&& ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_ARGS}
 X	@cd ${WRKDIR}/linuxwacom/${LINUXWACOM} \
 X		&& ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_ARGS}
 X
 Xdo-install:
 X	@${INSTALL} ${WRKDIR}/uwacom/uwacom.ko ${DESTDIR}/boot/modules/
 X	@${INSTALL} ${WRKDIR}/linuxwacom/${LINUXWACOM}/src/xdrv/wacom_drv.so \
 X		${PREFIX}/lib/xorg/modules/input/
 X	@${INSTALL_MAN} ${WRKDIR}/linuxwacom/${LINUXWACOM}/src/wacom.4x.gz \
 X		${PREFIX}/man/man4/
 X
 Xpost-install:
 X	@${CAT} ${PKGMESSAGE}
 X
 X.include <bsd.port.mk>
 2c8ac90824175dfffa7ed05f34e7748e
 echo x - ports/x11-drivers/xf86-input-wacom/distinfo
 sed 's/^X//' >ports/x11-drivers/xf86-input-wacom/distinfo << 'f0832b4922279a28a93db1930c3afee1'
 XMD5 (xorg/driver/bsdwacom-35.tbz) = 94cb1823723dc7f260c4cf385941f9bd
 XSHA256 (xorg/driver/bsdwacom-35.tbz) = b2697c87d55976ea52acbd1d2296b9d066b702dba7b1cd264c4799e43aa4104b
 XSIZE (xorg/driver/bsdwacom-35.tbz) = 19951
 XMD5 (xorg/driver/linuxwacom-0.8.1-3.tar.bz2) = d09b212946e321cc503adf84e243ca99
 XSHA256 (xorg/driver/linuxwacom-0.8.1-3.tar.bz2) = cf1ac159d87666d16e2e3bfad81ede93e088b3bf64bb6d2d469adceb2a4c9dee
 XSIZE (xorg/driver/linuxwacom-0.8.1-3.tar.bz2) = 1209228
 f0832b4922279a28a93db1930c3afee1
 echo x - ports/x11-drivers/xf86-input-wacom/pkg-descr
 sed 's/^X//' >ports/x11-drivers/xf86-input-wacom/pkg-descr << '8458a9ec0fb3bb01a24dd1346d561afd'
 XThis package contains the X.Org linuxwacom driver, a Wacom kernel module
 Xand a script to configure Xorg.
 X
 XThe kernel module is provided by Bartosz Fabianowski <freebsd at chillt.de> and
 Xsupports the following devices:
 X	Graphire*, Graphire2*, Graphire3, Graphire4
 X	Bamboo, Bamboo One*, Bamboo Fun
 X	Intuos3, Cintiq 21UX
 X	Volito*, Volito2*
 X	PenStation2*, PenPartner2*
 X
 X* not tested
 X
 XWWW: http://linuxwacom.sourceforge.net/
 X
 X- Kamikaze
 Xkamikaze at bsdforen.de
 8458a9ec0fb3bb01a24dd1346d561afd
 echo c - ports/x11-drivers/xf86-input-wacom/files
 mkdir -p ports/x11-drivers/xf86-input-wacom/files > /dev/null 2>&1
 echo x - ports/x11-drivers/xf86-input-wacom/files/wacom.in
 sed 's/^X//' >ports/x11-drivers/xf86-input-wacom/files/wacom.in << 'd5245a860ec402b4007475b181b81e43'
 X#!/bin/sh
 X
 X# PROVIDE: wacom
 X# REQUIRE: FILESYSTEMS
 X#
 X# Add the following lines to /etc/rc.conf.local or /etc/rc.conf
 X# to enable this service:
 X#
 X# wacom_enable (bool):   Set to NO by default.
 X#               Set it to YES to enable wacom.
 X#
 X
 X. %%RC_SUBR%%
 X
 Xname="wacom"
 Xrcvar=${name}_enable
 X
 Xextra_commands=setup
 Xsetup_cmd=do_setup
 Xstart_cmd=do_start
 Xstop_cmd=do_stop
 X
 X#
 X# Inserts a line at the end of a section of an Xorg configuration file.
 X# Only works for unique sections.
 X#
 Xsection_insert_line() {
 X	local file section insert begin end length
 X	file="$1"
 X	section="$2"
 X	insert="$3"
 X
 X	# Find the beginning of the section.
 X	begin="$(
 X		/usr/bin/grep -Ein \
 X		"^[[:space:]]*Section[[:space:]]+\"$section\"" \
 X		"$file"
 X	)"
 X	begin="${begin%%:*}"
 X
 X	if ! [ "$begin" -eq "$begin" ]; then
 X		# Begin is not numeric, something is wrong, bail out.
 X		echo "Identifying section $section has failed."
 X		echo "The section has to appear exactly once."
 X		return 1
 X	fi
 X
 X	# Find the end of the section.
 X	for end in $(/usr/bin/grep -Ein "^[[:space:]]*EndSection" "$file"); {
 X		end="${end%%:*}"
 X		test "$end" -gt "$begin" && break
 X	}
 X
 X	if ! [ "$end" -gt "$begin" ]; then
 X		echo "The section $section is not closed."
 X		return 2
 X	fi
 X
 X	# Determine the length of the configuration file.
 X	length="$(/usr/bin/wc -l "$file")"
 X	length=${length% *}
 X
 X	# Insert the line.
 X	/bin/cp "$file" "$file.$$"
 X
 X	/usr/bin/head -n$(($end - 1)) "$file.$$" > "$file"
 X	echo "$insert" >> "$file"
 X	/usr/bin/tail -n$(($length - $end + 1)) "$file.$$" >> "$file"
 X	
 X	/bin/rm "$file.$$"
 X}
 X
 X#
 X# Adds the necessary lines to the Xorg configuration.
 X#
 Xdo_setup() {
 X	local config_locations config
 X
 X	# Possible Xorg configuration file locations, taken from the
 X	# xorg.conf(5) manual page.
 X	config_locations="
 X/etc/X11/$XORGCONFIG
 X/usr/local/etc/X11/$XORGCONFIG
 X/etc/X11/xorg.conf-4
 X/etc/X11/xorg.conf
 X/etc/xorg.conf
 X/usr/local/etc/X11/xorg.conf.$HOST
 X/usr/local/etc/X11/xorg.conf-4
 X/usr/local/etc/X11/xorg.conf
 X/usr/local/lib/X11/xorg.conf.$HOST
 X/usr/local/lib/X11/xorg.conf-4
 X/usr/local/lib/X11/xorg.conf
 XNONE
 X"
 X
 X	# Find the first matching config file.
 X	for config in $config_locations; {
 X		test -f "$config" && break
 X	}
 X
 X	if [ "$config" = "NONE" ]; then
 X		echo "No Xorg configuration has been found."
 X		return 1
 X	fi
 X
 X	echo "Setting up configuration in $config."
 X
 X	# Add all the necessary sections.
 X	for ident in stylus eraser cursor pad touch; {
 X		if /usr/bin/grep -Eqi "^[[:space:]]*Identifier[[:space:]]+\"$ident\"" "$config"; then
 X			echo "Skipping $ident, because it already exists in $config."
 X			continue
 X		fi
 X
 X		echo "Inserting $ident."
 X
 X		echo "
 XSection \"InputDevice\"
 X	Driver		\"wacom\"
 X	Identifier	\"$ident\"
 X	Option		\"Device\"	\"/dev/event0\"
 X	Option		\"Type\"	\"$ident\"
 X	Option		\"USB\"		\"on\"
 XEndSection
 X" >> "$config"
 X
 X		section_insert_line "$config" "ServerLayout" "	InputDevice	\"$ident\"	\"SendCoreEvents\""
 X	}
 X
 X}
 X
 Xdo_start() {
 X	if /sbin/kldstat | /usr/bin/grep -q uwacom; then
 X		echo "${name} is already running."
 X		return 0
 X	fi
 X	echo "Starting ${name}."
 X	/sbin/kldload uwacom
 X}
 X
 Xdo_stop() {
 X	if ! /sbin/kldstat | /usr/bin/grep -q uwacom; then
 X		echo "${name} is not running."
 X		return 0
 X	fi
 X	echo "Stopping ${name}."
 X	/sbin/kldunload uwacom
 X}
 X
 Xload_rc_config $name
 X
 X: ${wacom_enable="NO"}
 X
 Xrun_rc_command "$1"
 d5245a860ec402b4007475b181b81e43
 echo x - ports/x11-drivers/xf86-input-wacom/pkg-plist
 sed 's/^X//' >ports/x11-drivers/xf86-input-wacom/pkg-plist << 'c8e8f39ea9b008a2398c7c41a43d661a'
 Xlib/xorg/modules/input/wacom_drv.so
 X at cwd %%DESTDIR%%/
 Xboot/modules/uwacom.ko
 c8e8f39ea9b008a2398c7c41a43d661a
 echo x - ports/x11-drivers/xf86-input-wacom/pkg-message
 sed 's/^X//' >ports/x11-drivers/xf86-input-wacom/pkg-message << 'e91b20850a8d72e042364d9f88e71619'
 XTo setup the wacom driver for X and start the kernel module upon boot
 Xrun the following commands as the root user:
 X
 X# echo 'wacom_enable="YES"' >> /etc/rc.conf
 X# /usr/local/etc/rc.d/wacom setup
 X
 XTo activate the driver without rebooting run:
 X
 X# /usr/local/etc/rc.d/wacom start
 X
 XNow (re)plug in your tablet and restart X.
 e91b20850a8d72e042364d9f88e71619
 exit