one ADSL connection with 10 static IPs and PF

[Greg Hennessy]

It's not an operating system issue, it is an encapsulation and handoff issue and where that happens. 
 
If you can configure the adsl modem as a pure bridge, then you can perform the PPPoE encapsulation and handoff on FreeBSD itself.
 
A quick google will provide the recipe for that.  
 
--------------------------------------------------------------------------------
From: Mostaf Faridi [mostafafaridi at gmail.com]
Sent: 29 November 2011 16:23
To: Greg Hennessy
Cc: Fatal Error; freebsd-pf at freebsd.org
Subject: RE: one ADSL connection with 10 static IPs and PF

Can I do this with Linux?  Very easy than BSD 
On Nov 28, 2011 8:59 AM, "Mostaf Faridi" <mostafafaridi at gmail.com> wrote:
I can not find another ADSL modem here, I can find TP-Link, but I do not know , it work or no
On Nov 28, 2011 1:58 AM, "Greg Hennessy" <Greg.Hennessy at nviz.net> wrote:
If the Zyxel ADSL router supports PPP half bridge mode, configure that and then configure the PF host with the real IP addresses as appropriate.
Otherwise replace the router with something which does support PPP half bridge. Thomson Speedtouch is pretty solid in this space.
http://goo.gl/yr76Y
There was a thread on the PFSense mailing list a few weeks back with the same question.

Regards
Greg
________________________________________
From: owner-freebsd-pf at freebsd.org [owner-freebsd-pf at freebsd.org] On Behalf Of Mostaf Faridi [mostafafaridi at gmail.com]
Sent: 28 November 2011 08:52
To: Fatal Error
Cc: freebsd-pf at freebsd.org
Subject: Re: one ADSL connection with 10 static IPs and PF
Thanks all,
So I must choose PPoe,  for this problem,  but what I must do when I want
use all ten static IPs?