PF Policy routing failing to route ESP packets correctly

[Tom Judge]

Tom Judge wrote:
> Hi,
> 
> I am having some problems getting policy routing of outbound ESP packets 
> to work correctly.  It seems the routing works fine for everything but 
> esp packets.  Is this a known bug?
> 
> Tom
> 
> Relevent PF rules:
> 
> table <tbl.r21.s> { 100.198.71.78 , 100.198.71.66 }
> 
> 
> pass out  quick route-to ( fxp0 100.198.71.65 ) inet  from <tbl.r21.s> 
> to ! 100.198.71.64/28 keep state  label "RULE 21 --  "
> 

Just a bump on this thread to see if anyone has any ideas about this 
problem.

Here is a slightly better description of the problem.

The network layout is available at: http://www.tomjudge.com/tmp/tunnels.png

 From the diagram Host A and B both have there default gateway set as 
ISP A's router, and have a PF rule that should route traffic from ISP 
B's addresses to ISP B's router.  This seems to work for all traffic 
except the IPSEC ESP packets which always get transmitted to the default 
gateway that is set on the host.  It seems that they do not pass through 
the firewall or for some reason do not match the route-to rule.  Can 
anyone suggest a solution to this problem?

PF rule Host A: (First rule in rule set)

pass out quick on bge1 route-to ( bge1 112.0.0.1 ) inet from 112.0.0.2 
to ! 112.0.0.0/27 keep state

PF rule Host B: (First rule in rule set)

pass out quick on bge1 route-to ( bge1 114.0.0.1 ) inet from 114.0.0.2 
to ! 114.0.0.0/27 keep state


Thanks

Tom