SFP+ on PRO/10GbE

[Dan Langille]

On Tue, Mar 24, 2020, at 4:58 PM, Sergey Akhmatov wrote:
> 
> On 2020-03-24 11:22 PM, Dan Langille wrote:
> >
> > 	media: Ethernet autoselect (1000baseSX <full-duplex,rxpause,txpause>)
> > 	status: active
> > 	supported media:
> > 		media autoselect
> > 		media 10Gbase-SR
> > 	nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
> > 	plugged: SFP/SFP+/SFP28 10G Base-SR (LC)
> > 	vendor: AVAGO PN: AFBR-703SDZ SN: AD0946A00YB DATE: 2009-11-10
> > 	module temperature: 38.09 C Voltage: 3.33 Volts
> > 	RX: 0.31 mW (-4.95 dBm) TX: 0.56 mW (-2.48 dBm)
> > [dan at r720-01:~] $
> >
> > That looks right to me, but I have never inspected this before.
> 
> Not right actually. The supported media is "10Gbase-SR" which is correct 
> for this type of SFP,  but autodetected is "1000baseSX" and it's not 
> even listed as supported.
> 
> That doesn't make sense to me, maybe try to set media type manually?
> 
> # ifconfig ix0 media 10gbase-sr

See my recent post.  ifconfig down/up fixed the NIC.

Thank you for your help. It is appreciated.

-- 
  Dan Langille
  dan at langille.org