[Bug 238198] Traffic through a vm -> bridge(4) -> vlan -> ix(4) does not return

[bugzilla-noreply at freebsd.org]

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=238198

--- Comment #12 from dgilbert at eicat.ca ---
ix0 at pci0:7:0:0: class=0x020000 card=0x00008086 chip=0x15638086 rev=0x01
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Ethernet Controller 10G X550T'
    class      = network
    subclass   = ethernet

ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem
0xd0000000-0xd01fffff,0xd0200000-0xd0203fff irq 40 at device 0.0 on pci7
ix0: using 2048 tx descriptors and 2048 rx descriptors
ix0: msix_init qsets capped at 64
ix0: pxm cpus: 8 queue msgs: 63 admincnt: 1
ix0: using 8 rx queues 8 tx queues
ix0: Using MSIX interrupts with 9 vectors
ix0: allocated for 8 queues
ix0: allocated for 8 rx queues
ix0: Ethernet address: a0:36:9f:17:ba:10
ix0: PCI Express Bus: Speed 5.0GT/s Width x4
ix0: netmap queues/slots: TX 8/2048, RX 8/2048
ix0: link state changed to UP
ix0: link state changed to DOWN
ix0.1: link state changed to DOWN
bridge1: can't disable some capabilities on ix0.1: 0x400
ix0: promiscuous mode enabled
ix0.1: promiscuous mode enabled
bridge2: can't disable some capabilities on ix0.221: 0x400
ix0.221: promiscuous mode enabled
ix0: link state changed to UP
ix0.221: link state changed to UP
ix0.1: link state changed to UP

[1:13:313]root at run:~> cat /vms/FreeNAS/FreeNAS.conf
loader="bhyveload"
cpu=2
memory=8G
network0_type="virtio-net"
network0_switch="lan221"
disk0_type="virtio-blk"
disk0_name="disk0"
disk0_dev="sparse-zvol"
uuid="b2fdb1cd-b6d5-4ac0-a167-f216b52e0701"
network0_mac="58:9c:fc:01:d4:67"
disk1_name="disk1"
disk1_type="virtio-blk"
disk1_dev="sparse-zvol"
disk2_name="disk2"
disk2_type="virtio-blk"
disk2_dev="sparse-zvol"
disk3_name="disk3"
disk3_type="virtio-blk"
disk3_dev="sparse-zvol"

... so far I have only completed running "vm install FreeNAS" on this VM.

-- 
You are receiving this mail because:
You are the assignee for the bug.