bhyve, nat, lagg failover problems

[Rodney W. Grimes]

> On 2/15/19 5:28 PM, Johannes Lundberg wrote:
> > Hey!
> >
> > I have a setup like described here:
> > https://github.com/churchers/vm-bhyve/wiki/NAT-Configuration
> > Bhyve guests use static IP addresses and everything works fine (i.e.
> > guest can access host and internet).
> >
> > However, if I use lagg with failover for em0 and wlan0, and replace em0
> > with lagg0 in pf.conf the guests can not communicate with the host, or
> > internet. The failover works fine for the host. I'm sure there has to be
> > a way to get this to work...
> >
> > Is there anyone that can help?
> 
> Found the problem! The command
> 
> |# vm switch address public 192.168.8.1/24|
> 
> |fixed it. vm-bhyve's command 'vm's help did not list this option as
> available and therefor the confusion. It turns out the "vm" command's
> help was outdated, not the wiki. Now my bhyve guests also work properly
> during failover from ethernet to wifi :D I only setup the lagg in
> rc.conf and let vm-bhyve handle all settings regarding the bridge, as
> described in their wiki.
> |

Would you be willing to either put up a wiki article on this,
or work with Michael Dexter who would love to have this
well documented in the wiki as it is a frequently asked for
feature/setup.

I have added him to the cc, dexter at freebsd.org.

Thanks,
-- 
Rod Grimes                                                 rgrimes at freebsd.org