Cisco shows LACP not enabled on 11.1U2, BCM 57810S-t, 2960X IOS 15.2

[Rob Hutton]

Trying to get to a LACP Trunk config working on FreeNAS, but I'm not sure
if this is an upstream issue.  First step is just LACP bundle in edge mode
(no vlans) and bundle will not form.  The FreeNAS side shows it as being
active.  The switch is reporting that LACP is not enabled on the individual
ports.  We have tried multiple versions of IOS from 15.0 to 15.2(6)E1.  I
have about 10 windows servers with the same NICs on the same switch that
are negotiating LACP successfully as well as tagging vlans, so the hardware
pieces seem to be OK.  I have tried configuring from both the GUI and the
CL with the same result.

Cisco 2960X

switch config:
interface Port-channel10
switchport access vlan 1900
switchport mode access
!
interface GigabitEthernet1/0/27
switchport access vlan 1900
switchport mode access
channel-group 10 mode active
!
interface GigabitEthernet1/0/28
switchport access vlan 1900
switchport mode access
channel-group 10 mode active

logs from switch:
Mar 13 17:38:09.626: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/27,
changed state to up
Mar 13 17:38:09.665: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/28,
changed state to up
Mar 13 17:38:15.753: %EC-5-L3DONTBNDL2: Gi1/0/28 suspended: LACP currently
not enabled on the remote port.
Mar 13 17:38:16.005: %EC-5-L3DONTBNDL2: Gi1/0/27 suspended: LACP currently
not enabled on the remote port.

Switch#sh etherc summ
Flags:  D - down P - bundled in port-channel
I - stand-alone s - suspended
H - Hot-standby (LACP only)
R - Layer3   S - Layer2
U - in use   N - not in use, no aggregation
f - failed to allocate aggregator

M - not in use, minimum links not met
m - not in use, port not aggregated due to minimum links not met
u - unsuitable for bundling
w - waiting to be aggregated
d - default port

A - formed by Auto LAG


Number of channel-groups in use: 1
Number of aggregators:    1

Group  Port-channel  Protocol Ports
------+-------------+-----------+-----------------------------------------------
10  Po10(SD) LACP   Gi1/0/27(w) Gi1/0/28(w)

Switch#sh int gi1/0/27
GigabitEthernet1/0/27 is up, line protocol is down (notconnect)

Switch#sh int gi1/0/28
GigabitEthernet1/0/28 is up, line protocol is down (notconnect)


FreeNAS
ifconfig

bxe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
   options=527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSU
M,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO>
   ether 00:0e:1e:86:7c:70
   hwaddr 00:0e:1e:86:7c:70
   nd6 options=9<PERFORMNUD,IFDISABLED>
   media: Ethernet autoselect (10Gbase-T <full-duplex>)
   status: active

bxe1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
   options=527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSU
M,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO>
   ether 00:0e:1e:86:7c:70
   hwaddr 00:0e:1e:86:7c:72
   nd6 options=9<PERFORMNUD,IFDISABLED>
   media: Ethernet autoselect (10Gbase-T <full-duplex>)
   status: active

lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
   options=527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSU
M,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO>
   ether 00:0e:1e:86:7c:70
   nd6 options=9<PERFORMNUD,IFDISABLED>
   media: Ethernet autoselect
   status: active
   groups: lagg
   laggproto lacp lagghash l2,l3,l4
   laggport: bxe0 flags=0<>
   laggport: bxe1 flags=0<>

Last edited: 12 minutes ago