cxl nic not working after reboot

[Navdeep Parhar]

On 8/30/18 3:14 PM, Navdeep Parhar wrote:
> On 8/30/18 2:51 PM, Marius Halden wrote:
>> On Thu, Aug 30, 2018, at 19:27, Navdeep Parhar wrote:
>>> On 8/30/18 4:21 AM, Marius Halden wrote:
>>>> I tried to downgrade to a the previous bsdrp version we were running based on 11.1-RELEASE-p10, but it did not start working again. ifconfig output and t5nex0 devlog follows (non-working state), but it all looks fine to me (media has always been reported wrong). I did notice though that "hw_mac_init_port[0], …" will always be logged when it works but not when when it doesn't work. I confirmed this on a box still running the old version which functions as intended.
>>>>
>>>> The ones not working has a newer firmware version than the ones working.
>>>>
>>>> Non-working:
>>>> # sysctl dev.t5nex.0.firmware_version
>>>> dev.t5nex.0.firmware_version: 1.19.1.0
>>>>
>>>>
>>>> Working:
>>>> # sysctl dev.t5nex.0.firmware_version
>>>> dev.t5nex.0.firmware_version: 1.16.45.0
>>>>
>>>> Any other ideas?
>>>>
>>>
>>> I'm still looking into it.  The current working theory is that the peer
>>> is trying to autonegotiate when it shouldn't (it's 1Gbps optics).  If
>>> you know how to disable AN on the peer this should be easy to test.
>>
>> Thanks. Unfortunately we don't have access to the peer as that's our ISPs router. According to the sysctl autonegotiate is not supported on our side.
>>
> 
> I'll get a couple of 1G optics in a day or so and then I'll be able to
> try some things for myself.  Wait for that or try a 1G TWINAX (copper)
> SFP+ cable in case you have one -- that should be able to link up (if

Sorry, this won't work either.  At 1G, AN is done only for -BT (RJ45)
copper cables, not for SFP+ TWINAX copper.

Regards,
Navdeep