Disappointing packets-per-second performance results on a Dell, PE R530

[Jordan Caraballo]

Hi Oliver, my bad, I missed that one. Here is the info:

* Switch with 48x 10G ports and 12x 40G ports was used
* (48) 10G connected nodes were used.
* (24) nodes on each side of the firewall
* Packet per second (PPS) tests were run using 'iperf'
* Bandwidth tests were run using 'nuttcp'
* Parallelization was handled by using pdsh
* Each of the 24 sending nodes ran either:
   iperf3 -c "<target>" -u -A 5 -l 512 -b 0 -t "<duration>" -J
   nuttcp -fparse -l 128k -w1m -T "<duration>" "<target>"


On 31/01/17 16:45, Olivier Cochard-Labbé wrote:
> On Tue, Jan 31, 2017 at 6:53 PM, Jordan Caraballo 
> <jordancaraballo87 at gmail.com <mailto:jordancaraballo87 at gmail.com>> wrote:
>
>     This are the most recent stats. No advances so far. The system has
>     -Current right now.
>
>     Any help or feedback would be appreciated.
>
>
> ​I've tried: But you didn't answer my previous question.
>
> How do you generate your IP traffic ?
> What tool are you using​ and can you provide the exact command line used ?