Troubles with 'em' driver and UDP packets

[Vaidas Damoševičius]

It's not cabling problem :)

Another example with -b and -i :

vd at v0s4:~ % iperf3 -u -c 1.2.3.4 -i4 -b1000m -P1
Connecting to host 1.2.3.4, port 5201
[  4] local 1.2.3.3 port 10672 connected to 1.2.3.4 port 5201
[ ID] Interval           Transfer     Bandwidth       Total Datagrams
[  4]   0.00-4.00   sec   446 MBytes   935 Mbits/sec  1761605  
[  4]   4.00-8.00   sec   457 MBytes   958 Mbits/sec  1809551  
[  4]   8.00-10.00  sec   228 MBytes   958 Mbits/sec  900740  
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Jitter    Lost/Total Datagrams
[  4]   0.00-10.00  sec  1.10 GBytes   949 Mbits/sec  770.668 ms  0/35 (0%)  
[  4] Sent 35 datagrams

Result is totaly different.

> On 20 Mar 2015, at 11:29, Mehmet Erol Sanliturk <m.e.sanliturk at gmail.com> wrote:
> 
> 
> 
> On Fri, Mar 20, 2015 at 2:23 AM, Vaidas Damoševičius <vd at par.lt> wrote:
> Hello,
> 
> I have 2 boxes with FreeBSD 10.1-RELEASE/amd64 and "Intel(R) PRO/1000 Network Connection 7.4.2" NIC's directly connected to each other. I noticed strange problem - I'm loosing small UDP packets under high load. I've tried to test it with iperf and got the following:
> 
> ---
> 
> vd at v0s4:~ % iperf3 -u -c 1.2.3.4
> Connecting to host 1.2.3.4, port 5201
> [  4] local 1.2.3.3 port 64254 connected to 1.2.3.4 port 5201
> [ ID] Interval           Transfer     Bandwidth       Total Datagrams
> [  4]   0.00-1.01   sec   120 KBytes   976 Kbits/sec  15
> [  4]   1.01-2.01   sec   128 KBytes  1.05 Mbits/sec  16
> [  4]   2.01-3.01   sec   128 KBytes  1.05 Mbits/sec  16
> [  4]   3.01-4.01   sec   128 KBytes  1.05 Mbits/sec  16
> [  4]   4.01-5.01   sec   128 KBytes  1.05 Mbits/sec  16
> [  4]   5.01-6.01   sec   128 KBytes  1.05 Mbits/sec  16
> [  4]   6.01-7.01   sec   128 KBytes  1.05 Mbits/sec  16
> [  4]   7.01-8.00   sec   128 KBytes  1.05 Mbits/sec  16
> [  4]   8.00-9.01   sec   128 KBytes  1.05 Mbits/sec  16
> [  4]   9.01-10.01  sec   128 KBytes  1.05 Mbits/sec  16
> - - - - - - - - - - - - - - - - - - - - - - - - -
> [ ID] Interval           Transfer     Bandwidth       Jitter    Lost/Total Datagrams
> [  4]   0.00-10.01  sec  1.24 MBytes  1.04 Mbits/sec  0.325 ms  0/159 (0%)
> [  4] Sent 159 datagrams
> 
> Any advice how to solve it ?
> 
> Thank you.
> _______________________________________________
> 
> 
> 
> 
> I think you use Gigabit CROSS cable ( cat 5e or cat 6 ) .
> CROSS cable is required if connection is from computer to computer .
> 
> Only for remaindering .
> 
> 
> 
> Thank you very much .
> 
> Mehmet Erol Sanliturk
> 
> 
> 
>