ipv4 routing from bhyve

[williamecowell at hush.ai]

Hello, I hope I can have some assistance.

I am trying to get networking via wlan0 but without NAT or bridging (doesn't work on wifi unless WDS).

say my my main network is 10.10.2.0/24, gateway/internet is 10.10.2.1, my ip is 10.10.2.252.

I started to config my bhyve network on 172.16.32.0/24

I added a bridge interface with an ip of 172.16.32.1

enable forwarding and fastforwarding. from my understanding of the handbook chapter things should work when I type:

# route add -net 172.16.32.0/24 10.10.2.252
route: writing to routing socket: File exists
add net 172.16.32.0: gateway 10.10.2.252 fib 0: route already in table
# 

# netstat -4nr
Routing tables

Internet:
Destination        Gateway            Flags      Netif Expire
default            10.10.2.1        UGS       lagg0
127.0.0.1          link#3             UH          lo0
10.10.2.0/24     link#5             U         lagg0
10.10.2.252      link#5             UHS         lo0
172.16.32.0/24    link#4             U       bridge0
172.16.32.1       link#4             UHS         lo0
# 

bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	ether 00:bd:0f:fc:01:10
	inet 172.16.32.1 netmask 0xffffff00 broadcast 172.16.32.255 
	nd6 options=9<PERFORMNUD,IFDISABLED>
	id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
	maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
	root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
	member: tap0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
	        ifmaxaddr 0 port 6 priority 128 path cost 2000000
lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
...
	inet 10.10.2.252 netmask 0xffffff00 broadcast 10.10.2.255 
	nd6 options=9<PERFORMNUD,IFDISABLED>
	media: Ethernet autoselect
	status: active
	laggproto failover lagghash l2,l3,l4
	laggport: alc0 flags=1<MASTER>
	laggport: wlan0 flags=4<ACTIVE>
tap0: flags=8903<UP,BROADCAST,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=80000<LINKSTATE>
	ether 00:bd:8f:62:67:10
	nd6 options=9<PERFORMNUD,IFDISABLED>
	media: Ethernet autoselect
	status: no carrier
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
...
pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33160
tap9: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=80000<LINKSTATE>
	ether 00:bd:cb:46:02:09
	nd6 options=1<PERFORMNUD>
	media: Ethernet autoselect
	status: no carrier
tap1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=80000<LINKSTATE>
	ether 00:bd:58:61:02:01
	nd6 options=1<PERFORMNUD>
	media: Ethernet autoselect
	status: no carrier

Willy,

PS. sorry for the x post as wasn't sure which list..