[RFC] Patch to add Software/Generic Segmentation Offload (GSO) support in FreeBSD
Stefano Garzarella
stefanogarzarella at gmail.com
Wed Sep 17 18:18:45 UTC 2014
Hi Adrian,
the results that I sent, regard just one flow, but I can try with two
simultaneous flows and I'll send you the results.
Thanks,
Stefano
2014-09-17 19:27 GMT+02:00 Adrian Chadd <adrian at freebsd.org>:
> Hi!
>
> Cool!
>
> How many flows were you testing with? Just one or two?
>
> It's for outbound, so it's not _as_ big a deal as it is for inbound,
> but it'd still be nice to know.
>
>
> -a
>
>
> On 17 September 2014 01:27, Stefano Garzarella
> <stefanogarzarella at gmail.com> wrote:
> > Hi all,
> > I have recently worked, during my master’s thesis with the supervision
> > of Prof. Luigi Rizzo, on a project to add GSO (Generic Segmentation
> > Offload) support in FreeBSD. I will present this project at EuroBSDcon
> > 2014, in Sofia (Bulgaria) on September 28, 2014.
> >
> > Following is a brief description of our project:
> >
> > The use of large frames makes network communication much less
> > demanding for the CPU. Yet, backward compatibility and slow links
> > requires the use of 1500 byte or smaller frames. Modern NICs with
> > hardware TCP segmentation offloading (TSO) address this problem.
> > However, a generic software version (GSO) provided by the OS has
> > reason to exist, for use on paths with no suitable hardware, such
> > as between virtual machines or with older or buggy NICs.
> >
> > Much of the advantage of TSO comes from crossing the network stack only
> > once per (large) segment instead of once per 1500-byte frame.
> > GSO does the same both for segmentation (TCP) and fragmentation (UDP)
> > by doing these operations as late as possible. Ideally, this could be
> done
> > within the device driver, but that would require modifications to all
> > drivers.
> > A more convenient, similarly effective approach is to segment
> > just before the packet is passed to the driver (in ether_output()).
> >
> > Our preliminary implementation supports TCP and UDP on IPv4/IPv6;
> > it only intercepts packets large than the MTU (others are left
> unchanged),
> > and only when GSO is marked as enabled for the interface.
> >
> > Segments larger than the MTU are not split in tcp_output(),
> > udp_output(), or ip_output(), but marked with a flag (contained in
> > m_pkthdr.csum_flags), which is processed by ether_output() just
> > before calling the device driver.
> >
> > ether_output(), through gso_dispatch(), splits the large frame as needed,
> > creating headers and possibly doing checksums if not supported by
> > the hardware.
> >
> > In experiments agains an LRO-enabled receiver (otherwise TSO/GSO
> > are ineffective) we have seen the following performance,
> > taken at different clock speeds (because at top speeds the
> > 10G link becomes the bottleneck):
> >
> >
> > Testing enviroment (all with Intel 10Gbit NIC)
> > Sender: FreeBSD 11-CURRENT - CPU i7-870 at 2.93 GHz + Turboboost
> > Receiver: Linux 3.12.8 - CPU i7-3770K at 3.50GHz + Turboboost
> > Benchmark tool: netperf 2.6.0
> >
> > --- TCP/IPv4 packets (checksum offloading enabled) ---
> > Freq. TSO GSO none Speedup
> > [GHz] [Gbps] [Gbps] [Gbps] GSO-none
> > 2.93 9347 9298 8308 12 %
> > 2.53 9266 9401 6771 39 %
> > 2.00 9408 9294 5499 69 %
> > 1.46 9408 8087 4075 98 %
> > 1.05 9408 5673 2884 97 %
> > 0.45 6760 2206 1244 77 %
> >
> >
> > --- TCP/IPv6 packets (checksum offloading enabled) ---
> > Freq. TSO GSO none Speedup
> > [GHz] [Gbps] [Gbps] [Gbps] GSO-none
> > 2.93 7530 6939 4966 40 %
> > 2.53 5133 7145 4008 78 %
> > 2.00 5965 6331 3152 101 %
> > 1.46 5565 5180 2348 121 %
> > 1.05 8501 3607 1732 108 %
> > 0.45 3665 1505 651 131 %
> >
> >
> > --- UDP/IPv4 packets (9K) ---
> > Freq. GSO none Speedup
> > [GHz] [Gbps] [Gbps] GSO-none
> > 2.93 9440 8084 17 %
> > 2.53 7772 6649 17 %
> > 2.00 6336 5338 19 %
> > 1.46 4748 4014 18 %
> > 1.05 3359 2831 19 %
> > 0.45 1312 1120 17 %
> >
> >
> > --- UDP/IPv6 packets (9K) ---
> > Freq. GSO none Speedup
> > [GHz] [Gbps] [Gbps] GSO-none
> > 2.93 7281 6197 18 %
> > 2.53 5953 5020 19 %
> > 2.00 4804 4048 19 %
> > 1.46 3582 3004 19 %
> > 1.05 2512 2092 20 %
> > 0.45 998 826 21 %
> >
> > We tried to change as little as possible the network stack to add
> > GSO support. To avoid changing API/ABI, we temporarily used spare
> > fields in struct tcpcb (TCP Control Block) and struct ifnet to store
> > some information related to GSO (enabled, max burst size, etc.).
> > The code that performs the segmentation/fragmentation is contained
> > in the file gso.[h|c] in sys/net. We used 4 bit in m_pkthdr.csum_flags
> > (CSUM_GSO_MASK) to encode the packet type (TCP/IPv4, TCP/IPv6, etc)
> > to prevent access to the TCP/IP/Ethernet headers of each packet.
> > In ether_output_frame(), if the packet requires the GSO
> > ((m->m_pkthdr.csum_flags & CSUM_GSO_MASK) != 0), it is segmented
> > or fragmented, and then they are sent to the device driver.
> >
> > At https://github.com/stefano-garzarella/freebsd-gso
> > you can find the kernel patches for FreeBSD-current, FreeBSD
> > 10-stable, FreeBSD 9-stable, a simple application (gso-stats.c)
> > that prints the GSO statistics and picobsd images with GSO support.
> >
> > At https://github.com/stefano-garzarella/freebsd-gso-src
> > you can get the FreeBSD source with GSO patch (various branch for
> > FreeBSD current, 10-stable, 9-stable).
> >
> > Any feedbacks, comments, questions are welcome.
> >
> > Thank you very much,
> > Stefano Garzarella
> >
> >
> ------------------------------------------------------------------------------------------------------------
> > How to use GSO:
> >
> > - Apply the right kernel patch.
> >
> > - To compile the GSO support add ‘ options GSO ' to your kernel config
> file
> > and
> > rebuild a kernel.
> >
> > - To manage the GSO parameters there are some sysctls:
> > - net.inet.tcp.gso - GSO enable on TCP communications (!=0)
> > - net.inet.udp.gso - GSO enable on UDP communications (!=0)
> >
> > - for each interface:
> > - net.gso.dev."ifname”.max_burst - GSO burst length limit
> > [default: IP_MAXPACKET=65535]
> > - net.gso.dev."ifname”.enable_gso - GSO enable on “ifname”
> > interface (!=0)
> >
> > - To show statistics:
> > - make sure that the GSO_STATS macro is defined in sys/net/gso.h
> > - use the simple gso-stats.c application to access the sysctl
> > net.gso.stats
> > that contains the address of the gsostats structure (defined in
> > gso.h)
> > which records the statistics. (compile with
> > -I/path/to/kernel/src/patched/)
> >
> ------------------------------------------------------------------------------------------------------------
> >
> > --
> > *Stefano Garzarella*
> > stefano.garzarella at gmail.com
> > _______________________________________________
> > freebsd-current at freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-current
> > To unsubscribe, send any mail to "
> freebsd-current-unsubscribe at freebsd.org"
>
--
*Stefano Garzarella*
stefano.garzarella at gmail.com
More information about the freebsd-net
mailing list