[Bug 184311] [bge] [panic] kernel panic with bge(4) on SunFire X2100

[bugzilla-noreply at freebsd.org]

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=184311

Miroslav Lachman <000.fbsd at quip.cz> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |000.fbsd at quip.cz

--- Comment #4 from Miroslav Lachman <000.fbsd at quip.cz> ---
Are you talking about SunFire X2100 or SunFire X2100 M2?

Because "X2100" (withou M2) has only one bge NIC identified as BCM5721 and one
nVidia CK804 NIC.

"X2100 M2" has two bge BCM5714 and two nfe NVIDIA nForce MCP55 Networking
Adapter 


X2100 M2  - FreeBSD 8.4-RELEASE-p9 i386 GENERIC

from /var/run/dmesg.boot

bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x009003> mem
0xfdff0000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 17 at device 4.0 on pci6
bge0: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X 133 MHz
miibus2: <MII bus> on bge0
brgphy0: <BCM5714 10/100/1000baseTX PHY> PHY 1 on miibus2
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: 00:1b:24:xx:xx:xx
bge0: [ITHREAD]
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x009003> mem
0xfdfc0000-0xfdfcffff,0xfdfb0000-0xfdfbffff irq 18 at device 4.1 on pci6
bge1: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X 133 MHz
miibus3: <MII bus> on bge1
brgphy1: <BCM5714 10/100/1000baseTX PHY> PHY 1 on miibus3
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Ethernet address: 00:1b:24:xx:xx:xx
bge1: [ITHREAD]


pciconf

bge0 at pci0:6:4:0:        class=0x020000 card=0x534c108e chip=0x167814e4 rev=0xa3
hdr=0x00
    vendor     = 'Broadcom Corporation'
    device     = 'BCM5715C 10/100/100 PCIe Ethernet Controller'
    class      = network
    subclass   = ethernet
bge1 at pci0:6:4:1:        class=0x020000 card=0x534c108e chip=0x167814e4 rev=0xa3
hdr=0x00
    vendor     = 'Broadcom Corporation'
    device     = 'BCM5715C 10/100/100 PCIe Ethernet Controller'
    class      = network
    subclass   = ethernet

Note that pciconf says BCM5715C while dmesg shows BCM5714



X2100 M2 - FreeBSD 9.2-RELEASE-p5 amd64 GENERIC

bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x009003> mem
0xfdff0000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 17 at device 4.0 on pci6
bge0: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X 133 MHz
miibus2: <MII bus> on bge0
brgphy0: <BCM5714 1000BASE-T media interface> PHY 1 on miibus2
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: 00:1e:68:xx:xx:xx
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x009003> mem
0xfdfc0000-0xfdfcffff,0xfdfb0000-0xfdfbffff irq 18 at device 4.1 on pci6
bge1: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X 133 MHz
miibus3: <MII bus> on bge1
brgphy1: <BCM5714 1000BASE-T media interface> PHY 1 on miibus3
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Ethernet address: 00:1e:68:xx:xx:xx


pciconf

bge0 at pci0:6:4:0:        class=0x020000 card=0x534c108e chip=0x167814e4 rev=0xa3
hdr=0x00
    vendor     = 'Broadcom Corporation'
    device     = 'NetXtreme BCM5715 Gigabit Ethernet'
    class      = network
    subclass   = ethernet
bge1 at pci0:6:4:1:        class=0x020000 card=0x534c108e chip=0x167814e4 rev=0xa3
hdr=0x00
    vendor     = 'Broadcom Corporation'
    device     = 'NetXtreme BCM5715 Gigabit Ethernet'
    class      = network
    subclass   = ethernet


I am running "X2100 M2" without any problems on FreeBSD 8.4 and 9.2

-- 
You are receiving this mail because:
You are the assignee for the bug.