fastforward/routing: a 3 million packet-per-second system?
John Jasen
jjasen at gmail.com
Tue Jul 22 15:19:05 UTC 2014
Feedback and/or tips and tricks more than welcome.
Outstanding questions:
Would increasing the number of processor cores help?
Would a system where both processor QPI ports connect to each other
mitigate QPI bottlenecks?
Are there further performance optimizations I am missing?
Server Description:
The system in question is a Dell Poweredge R820, 16GB of RAM, and two
Intel(R) Xeon(R) CPU E5-4610 0 @ 2.40GHz.
Onboard, in a 16x PCIe slot, I have one Chelsio T-580-CR two-port 40GbE
NIC, and in an 8x slot, another T-580-CR dual port.
I am running FreeBSD 10.0-STABLE.
BIOS tweaks:
Hyperthreading (or Logical Processors) is turned off.
Memory Node Interleaving is turned off, but did not appear to impact
performance.
/boot/loader.conf contents:
#for CARP+PF testing
carp_load="YES"
#load cxgbe drivers.
cxgbe_load="YES"
#maxthreads appears to not exceed CPU.
net.isr.maxthreads=12
#bindthreads may be indicated when using cpuset(1) on interrupts
net.isr.bindthreads=1
#random guess based on googling
net.isr.maxqlimit=60480
net.link.ifqmaxlen=90000
#discussions with cxgbe maintainer and list led me to trying this.
Allows more interrupts
#to be fixed to CPUs, which in some cases, improves interrupt balancing.
hw.cxgbe.ntxq10g=16
hw.cxgbe.nrxq10g=16
/etc/sysctl.conf contents:
#the following is also enabled by rc.conf gateway_enable.
net.inet.ip.fastforwarding=1
#recommendations from BSD router project
kern.random.sys.harvest.ethernet=0
kern.random.sys.harvest.point_to_point=0
kern.random.sys.harvest.interrupt=0
#probably should be removed, as cxgbe does not seem to affect/be
affected by irq storm settings
hw.intr_storm_threshold=25000000
#based on Calomel.Org performance suggestions. 4x40GbE, seemed
reasonable to use 100GbE settings
kern.ipc.maxsockbuf=1258291200
net.inet.tcp.recvbuf_max=1258291200
net.inet.tcp.sendbuf_max=1258291200
#attempting to play with ULE scheduler, making it serve packets versus
netstat
kern.sched.slice=1
kern.sched.interact=1
/etc/rc.conf contains:
hostname="fbge1"
#should remove, especially given below duplicate entry
ifconfig_igb0="DHCP"
sshd_enable="YES"
#ntpd_enable="YES"
# Set dumpdev to "AUTO" to enable crash dumps, "NO" to disable
dumpdev="AUTO"
# OpenBSD PF options to play with later. very bad for raw packet rates.
#pf_enable="YES"
#pflog_enable="YES"
# enable packet forwarding
# these enable forwarding and fastforwarding sysctls. inet6 does not
have fastforward
gateway_enable="YES"
ipv6_gateway_enable="YES"
# enable OpenBSD ftp-proxy
# should comment out until actively playing with PF
ftpproxy_enable="YES"
#left in place, commented out from prior testing
#ifconfig_mlxen1="inet 172.16.2.1 netmask 255.255.255.0 mtu 9000"
#ifconfig_mlxen0="inet 172.16.1.1 netmask 255.255.255.0 mtu 9000"
#ifconfig_mlxen3="inet 172.16.7.1 netmask 255.255.255.0 mtu 9000"
#ifconfig_mlxen2="inet 172.16.8.1 netmask 255.255.255.0 mtu 9000"
# -lro and -tso options added per mailing list suggestion from Bjoern A.
Zeeb (bzeeb-lists at lists.zabbadoz.net)
ifconfig_cxl0="inet 172.16.3.1 netmask 255.255.255.0 mtu 9000 -lro -tso up"
ifconfig_cxl1="inet 172.16.4.1 netmask 255.255.255.0 mtu 9000 -lro -tso up"
ifconfig_cxl2="inet 172.16.5.1 netmask 255.255.255.0 mtu 9000 -lro -tso up"
ifconfig_cxl3="inet 172.16.6.1 netmask 255.255.255.0 mtu 9000 -lro -tso up"
# aliases instead of reconfiguring test clients. See above commented out
entries
ifconfig_cxl0_alias0="172.16.7.1 netmask 255.255.255.0"
ifconfig_cxl1_alias0="172.16.8.1 netmask 255.255.255.0"
ifconfig_cxl2_alias0="172.16.1.1 netmask 255.255.255.0"
ifconfig_cxl3_alias0="172.16.2.1 netmask 255.255.255.0"
# for remote monitoring/admin of the test device
ifconfig_igb0="inet 172.30.60.60 netmask 255.255.0.0"
Additional configurations:
cpuset-chelsio-6cpu-high
# Original provided by Navdeep Parhar <nparhar at gmail.com>
# takes vmstat -ai output into a list, and assigns interrupts in order to
# the available CPU cores.
# Modified: to assign only to the 'high CPUs', ie: on core1.
# See: http://lists.freebsd.org/pipermail/freebsd-net/2014-July/039317.html
#!/usr/local/bin/bash
ncpu=12
irqlist=$(vmstat -ia | egrep 't4nex|t5nex|cxgbc' | cut -f1 -d: | cut -c4-)
i=6
for irq in $irqlist; do
cpuset -l $i -x $irq
i=$((i+1))
[ $i -ge $ncpu ] && i=6
done
Client Description:
Two Intel(R) Xeon(R) CPU E5-2670 v2 @ 2.50GHz processors
64 GB ram
Mellanox Technologies MT27500 Family [ConnectX-3]
Centos 6.4 with updates
iperf3 installed from yum repositories: iperf3-3.0.3-3.el6.x86_64
Test setup:
I've found about 3 streams between Centos clients is about the best way
to get the most out of them.
Above certain points, the -b flag does not change results.
-N is an artifact from using TCP
-l is needed, as -M doesn't work for UDP.
I usually use launch scripts similar to the following:
for i in `seq 41 60`; do ssh loader$i "export TIME=120; export
STREAMS=1; export PORT=52$i; export PKT=64; export RATE=2000m;
/root/iperf-test-8port-udp" & done
The scripts execute the following on each host.
#!/bin/bash
PORT1=$PORT
PORT2=$(($PORT+1000))
PORT3=$(($PORT+2000))
iperf3 -c loader41-40gbe -u -b 10000m -i 0 -N -l $PKT -t$TIME
-P$STREAMS -p$PORT1 &
iperf3 -c loader42-40gbe -u -b 10000m -i 0 -N -l $PKT -t$TIME
-P$STREAMS -p$PORT1 &
iperf3 -c loader43-40gbe -u -b 10000m -i 0 -N -l $PKT -t$TIME
-P$STREAMS -p$PORT1 &
... (through all clients and all three ports) ...
iperf3 -c loader60-40gbe -u -b 10000m -i 0 -N -l $PKT -t$TIME
-P$STREAMS -p$PORT3 &
Results:
Summarized, netstat -w 1 -q 240 -bd, run through:
cat test4-tuning | egrep -v {'packets | input '} | awk '{ipackets+=$1}
{idrops+=$3} {opackets+=$5} {odrops+=$9} END {print "input "
ipackets/NR, "idrops " idrops/NR, "opackets " opackets/NR, "odrops "
odrops/NR}'
input 1.10662e+07 idrops 8.01783e+06 opackets 3.04516e+06 odrops 3152.4
Snapshot of raw output:
input (Total) output
packets errs idrops bytes packets errs bytes colls drops
11189148 0 7462453 1230805216 3725006 0 409750710 0 799
10527505 0 6746901 1158024978 3779096 0 415700708 0 127
10606163 0 6850760 1166676673 3751780 0 412695761 0 1535
10749324 0 7132014 1182425799 3617558 0 397930956 0 5972
10695667 0 7022717 1176521907 3669342 0 403627236 0 1461
10441173 0 6762134 1148528662 3675048 0 404255540 0 6021
10683773 0 7005635 1175215014 3676962 0 404465671 0 2606
10869859 0 7208696 1195683372 3658432 0 402427698 0 979
11948989 0 8310926 1314387881 3633773 0 399714986 0 725
12426195 0 8864415 1366877194 3562311 0 391853156 0 2762
13006059 0 9432389 1430661751 3570067 0 392706552 0 5158
12822243 0 9098871 1410443600 3715177 0 408668500 0 4064
13317864 0 9683602 1464961374 3632156 0 399536131 0 3684
13701905 0 10182562 1507207982 3523101 0 387540859 0
8690
13820227 0 10244870 1520221820 3562038 0 391823322 0
2426
14437060 0 10955483 1588073033 3480105 0 382810557 0
2619
14518471 0 11119573 1597028105 3397439 0 373717355 0
5691
14890287 0 11675003 1637926521 3199812 0 351978304 0
11007
14923610 0 11749091 1641594441 3171436 0 348857468 0
7389
14738704 0 11609730 1621254991 3117715 0 342948394 0
2597
14753975 0 11549735 1622935026 3207393 0 352812846 0
4798
More information about the freebsd-net
mailing list