if_qlxgb trouble
David Somayajulu
david.somayajulu at qlogic.com
Wed Feb 12 03:33:02 UTC 2014
Hi Hakisho,
I am using the same driver on a FreeBSD9.0 system and don't see the problem. The only difference is that the firmware version on my board is 4.9.46.1325015960
We can take this off line and discuss further.
Cheers
David S.
====
ql0: <Qlogic ISP 80xx PCI CNA Adapter-Ethernet Function v1.1.36> mem 0xfa400000-0xfa5fffff,0xfbb30000-0xfbb3ffff irq 24 at device 0.0 on pci9
ql0: qla_pci_attach: firmware[4.9.46.1325015960]
ql0: Ethernet address: 00:0e:1e:04:2d:98
ql1: <Qlogic ISP 80xx PCI CNA Adapter-Ethernet Function v1.1.36> mem 0xfa600000-0xfa7fffff,0xfbbb0000-0xfbbbffff irq 24 at device 0.1 on pci9
ql1: qla_pci_attach: firmware[4.9.46.1325015960]
ql1: Ethernet address: 00:0e:1e:04:2d:9c
# ifconfig ql0
ql0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8013b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,TSO4,LINKSTATE>
ether 00:0e:1e:04:2d:98
inet 192.168.1.2 netmask 0xffffff00 broadcast 192.168.1.255
inet6 fe80::20e:1eff:fe04:2d98%ql0 prefixlen 64 scopeid 0xe
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
media: Ethernet autoselect (10Gbase-SR <full-duplex>)
status: active
-----Original Message-----
From: owner-freebsd-net at freebsd.org [mailto:owner-freebsd-net at freebsd.org] On Behalf Of Hakisho Nukama
Sent: Tuesday, February 11, 2014 7:14 AM
To: net at freebsd.org
Subject: if_qlxgb trouble
I am trying to connect a HP NC523SFP in
FreeBSD 10.0-RELEASE over SFP+ to a switch.
This is my current progress, any hints are welcome.
More information on demand.
# kldload -v if_qlxgb
ql0: <Qlogic ISP 80xx PCI CNA Adapter-Ethernet Function v1.1.36> mem 0xfdc00000-0xfddfffff, 0xfdbf0000-0xfdbfffff irq 16 at device 0.0 on pci11
ql0: qla_pci_attach: firmware[4.8.22.1319135230]
ql0: Ethernet address: 2c:59:e5:ca:ff:ee
ql1: <Qlogic ISP 80xx PCI CNA Adapter-Ethernet Function v1.1.36> mem 0xfd800000-0xfd9fffff,0xfd7f0000-0xfd7fffff irq 16 at device 0.1 on
pci11
ql1: qla_pci_attach: firmware[4.8.22.1319135230]
ql1: Ethernet address: 2c:59:e5:ca:ff:ee
# sysctl dev.ql
dev.ql.0.%desc: Qlogic ISP 80xx PCI CNA Adapter-Ethernet Function v1.1.36
dev.ql.0.%driver: ql
dev.ql.0.%location: slot=0 function=0 handle=\_SB_.PCI0.PT02.IPE4.
IPE1.PES1
dev.ql.0.%pnpinfo: vendor=0x1077 device=0x8020 subvendor=0x103c
subdevice=0x3733 class=0x020000
dev.ql.0.%parent: pci11
dev.ql.0.stats: 0
dev.ql.0.fw_version: 4.8.22.1319135230
dev.ql.0.debug: 0
dev.ql.0.std_replenish: 8
dev.ql.0.jumbo_replenish: 2
dev.ql.0.rcv_pkt_thres: 128
dev.ql.0.rcv_pkt_thres_d: 32
dev.ql.0.snd_pkt_thres: 16
dev.ql.0.free_pkt_thres: 1024
dev.ql.0.num_rds_rings: 2
dev.ql.0.num_sds_rings: 4
dev.ql.1.%desc: Qlogic ISP 80xx PCI CNA Adapter-Ethernet Function v1.1.36
dev.ql.1.%driver: ql
dev.ql.1.%location: slot=0 function=1 handle=\_SB_.PCI0.PT02.IPE4.IPE1.PE11
dev.ql.1.%pnpinfo: vendor=0x1077 device=0x8020 subvendor=0x103c
subdevice=0x3733 class=0x020000
dev.ql.1.%parent: pci11
dev.ql.1.stats: 0
dev.ql.1.fw_version: 4.8.22.1319135230
dev.ql.1.debug: 0
dev.ql.1.std_replenish: 8
dev.ql.1.jumbo_replenish: 2
dev.ql.1.rcv_pkt_thres: 128
dev.ql.1.rcv_pkt_thres_d: 32
dev.ql.1.snd_pkt_thres: 16
dev.ql.1.free_pkt_thres: 1024
dev.ql.1.num_rds_rings: 2
dev.ql.1.num_sds_rings: 4
# ifconfig ql0 10.13.37.21
ql0: qla_issue_cmd: cmd[0x001b2218] = 0x80000002
sig[0x001b2228] = 0xcafe0100
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql0: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000002
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql0: qla_get_max_rds: Q8_CMD_RD_MAX_RDS_PER_CNTXT failed
ql0: qla_issue_cmd: cmd[0x001b2218] = 0x80000003
sig[0x001b2228] = 0xcafe0100
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql0: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000003
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql0: qla_get_max_sds: Q8_CMD_RD_MAX_RDS_PER_CNTXT failed
ql0: qla_issue_cmd: cmd[0x001b2218] = 0x80000004
sig[0x001b2228] = 0xcafe0100
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql0: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000004
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql0: qla_get_max_rules: Q8_CMD_RD_MAX_RULES_PER_CNTXT failed
ql0: qla_issue_cmd: cmd[0x001b2218] = 0x80000005
sig[0x001b2228] = 0xcafe0100
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql0: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000005
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql0: qla_get_max_rcv_cntxts: Q8_CMD_RD_MAX_RX_CNTXT failed
ql0: qla_issue_cmd: cmd[0x001b2218] = 0x80000006
sig[0x001b2228] = 0xcafe0100
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql0: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000006
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql0: qla_get_max_tx_cntxts: Q8_CMD_RD_MAX_TX_CNTXT failed
ql0: qla_issue_cmd: cmd[0x001b2218] = 0x80000018
sig[0x001b2228] = 0xcafe0100
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql0: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000018
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql0: qla_get_max_mtu: Q8_CMD_RD_MAX_MTU failed
ql0: qla_issue_cmd: cmd[0x001b2218] = 0x80000019
sig[0x001b2228] = 0xcafe0100
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql0: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000019
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql0: qla_get_max_lro: Q8_CMD_RD_MAX_LRO failed
ql0: qla_issue_cmd: cmd[0x001b2218] = 0x80000016
sig[0x001b2228] = 0xcafe0100
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql0: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000016
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql0: qla_get_flow_control: Q8_CMD_GET_FLOW_CNTRL failed
ql0: qla_issue_cmd: cmd[0x001b2218] = 0x80000007
sig[0x001b2228] = 0xcafe0100
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x15c7d160
arg3[0x001b2224] = 0x00000120
ql0: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000007
arg1 = 0x00000000
arg2 = 0x15c7d160
arg3 = 0x00000120
ql0: qla_init_rcv_cntxt: Q8_CMD_CREATE_RX_CNTXT failed
ql0: qla_fw_cmd: xmit queue full
# ifconfig ql1 10.13.37.2
ql1: qla_issue_cmd: cmd[0x001b2218] = 0x80000002
sig[0x001b2228] = 0xcafe0101
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql1: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000002
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql1: qla_get_max_rds: Q8_CMD_RD_MAX_RDS_PER_CNTXT failed
ql1: qla_issue_cmd: cmd[0x001b2218] = 0x80000003
sig[0x001b2228] = 0xcafe0101
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql1: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000003
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql1: qla_get_max_sds: Q8_CMD_RD_MAX_RDS_PER_CNTXT failed
ql1: qla_issue_cmd: cmd[0x001b2218] = 0x80000004
sig[0x001b2228] = 0xcafe0101
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql1: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000004
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql1: qla_get_max_rules: Q8_CMD_RD_MAX_RULES_PER_CNTXT failed
ql1: qla_issue_cmd: cmd[0x001b2218] = 0x80000005
sig[0x001b2228] = 0xcafe0101
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql1: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000005
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql1: qla_get_max_rcv_cntxts: Q8_CMD_RD_MAX_RX_CNTXT failed
ql1: qla_issue_cmd: cmd[0x001b2218] = 0x80000006
sig[0x001b2228] = 0xcafe0101
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql1: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000006
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql1: qla_get_max_tx_cntxts: Q8_CMD_RD_MAX_TX_CNTXT failed
ql1: qla_issue_cmd: cmd[0x001b2218] = 0x80000018
sig[0x001b2228] = 0xcafe0101
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql1: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000018
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql1: qla_get_max_mtu: Q8_CMD_RD_MAX_MTU failed
ql1: qla_issue_cmd: cmd[0x001b2218] = 0x80000019
sig[0x001b2228] = 0xcafe0101
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql1: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000019
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql1: qla_get_max_lro: Q8_CMD_RD_MAX_LRO failed
ql1: qla_issue_cmd: cmd[0x001b2218] = 0x80000016
sig[0x001b2228] = 0xcafe0101
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql1: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000016
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql1: qla_get_flow_control: Q8_CMD_GET_FLOW_CNTRL failed
ql1: qla_issue_cmd: cmd[0x001b2218] = 0x80000007
sig[0x001b2228] = 0xcafe0101
arg1[0x001b221c] = 0x00000002
arg2[0x001b2220] = 0x0923b160
arg3[0x001b2224] = 0x00000120
ql1: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000007
arg1 = 0x00000002
arg2 = 0x0923b160
arg3 = 0x00000120
ql1: qla_init_rcv_cntxt: Q8_CMD_CREATE_RX_CNTXT failed
ql1: qla_fw_cmd: xmit queue full
# ifconfig ql0
ql0: flags=8803<UP,BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8013b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,TSO4,LINKSTATE>
ether 2c:59:e5:ca:ff:ee
inet 10.13.37.2 netmask 0xffffff00 broadcast 10.13.37.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: no carrier
# ifconfig ql0
ql1: flags=8803<UP,BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8013b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,TSO4,LINKSTATE>
ether 2c:59:e5:ca:ff:ee
inet 10.13.37.3 netmask 0xffffff00 broadcast 10.13.37.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: no carrier
Best Regards,
Hakisho Nukama
_______________________________________________
freebsd-net at freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscribe at freebsd.org"
________________________________
This message and any attached documents contain information from QLogic Corporation or its wholly-owned subsidiaries that may be confidential. If you are not the intended recipient, you may not read, copy, distribute, or use this information. If you have received this transmission in error, please notify the sender immediately by reply e-mail and then delete this message.
More information about the freebsd-net
mailing list