Problems of using ipv6 addresses on loc0

[Damien Fleuriot]

On 12 Mar 2013, at 21:06, "Vladislav Prodan" <universite at ukr.net> wrote:

> 
> I have a FreeBSD 8.2-STABLE amd64.
> 
> Network:
> vlan300: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>        description: Uplink_1
>    inet
>    inet6    
> 
> vlan400: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>        description: Uplink_2
>    inet
>    inet6    
> 
> vlan100: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>        description: Internal_LAN
>    inet
>        inet6 2001:67c:21f0::ffff prefixlen 64
> 
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
>        options=3<RXCSUM,TXCSUM>
>        inet 127.0.0.1 netmask 0xff000000
>        inet6 ::1 prefixlen 128
>        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x9
>        inet6 2001:67c:21f0:f::1 prefixlen 64
>        nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
> 
> Some services, such as named, refused to use ipv6 with lo0.
> Option
>    query-source-v6 address 2001:67c:21f0::1;
> makes a mistake and named service will not start.
> Problems with the ipv6 address are on vlan100 - no.
> 
> P.S. BIND 9.9.2-P1
> 
> -- 
> Vladislav V. Prodan            
> System & Network Administrator 
> http://support.od.ua           
> +380 67 4584408, +380 99 4060508
> VVP88-RIPE
> 

The addresses for lo0 and BIND's query-source differ (extraneous :f), so unless this is a typo, that may be your problem.