FreeBSD 9.1-RELEASE + bge0 == watchdog timeout

[Miroslav Lachman]

YongHyeon PYUN wrote:
> On Wed, Feb 27, 2013 at 12:09:28PM +0100, Miroslav Lachman wrote:

[...]

>> I can provide you full access to this machine (if you want) or let me
>> know, what version I should check. Older versions (6.x - 8.3) are
>> working fine with hw.bge.allow_asf="1" in loader.conf. I didn't test
>> newer releases on these old machines.
>
> The reporter said the machine was Sun Fire X2200 M2 so I guess you
> may see the same issue on both stable/9 and stable/8. Ideally the
> loader tunable hw.bge.allow_asf should not be there and driver
> should take care of it by checking the existence of ASF/IPMI
> firmware.
>
> Can you setup a remote debugging environments(+ IPMI access) like
> the following URL?
> http://people.freebsd.org/~yongari/remote_debugging.txt

The one Sun Fire X2100 M2 is idling in datacenter and connected to 
internet, so I can remotely reinstall it to stable/9 withing day or two 
and give you full access to it (ssh user, root, BMC / IPMI admin account 
with remote KVM + remote media). But as I understand, you need another 
machine connected to it with serial and another ethernet. It will take 
me some more time, as I will need to go to the datacenter, find some 
serial cable etc.

Let me know if ssh + ipmi access to X2100 alone is useful for you to 
start, or only full remote debugging setup is needed.

Can you point me to the original problem report with X2200 M2?

Miroslav Lachman