Low Bandwidth on intercontinental connections
Adrian Chadd
adrian at freebsd.org
Wed Nov 21 18:29:34 UTC 2012
Hi!
Firstly - please file a PR.
Secondly - there's some great tcp counters in 'netstat -sp tcp' (and
ip, and udp, and icmp.) You can zero them; netstat -sp tcp -z. I
suggest dumping them before/after and compare the values.
Adrian
On 21 November 2012 07:41, Marc Peters <marc at mpeters.org> wrote:
> Hi list,
>
> we are experiencing low throughput on interncontinental connections with
> our FreeBSD Servers. We made several tests and are wondering, why this
> would be. The first tests were on an IPSEC VPN between our datacenter in
> DE and Santa Clara, CA. We are connected with two gigabit uplinks in
> each DC. Pushing data by scp between our FreeBSD servers takes ages.
> Starting with several MB/s it drops to 60-70KB/s:
>
> [root at freebsd ~]# ls -alh test.tgz
> -rw-r----- 1 root wheel 58M Oct 5 2010 test.tgz
> [root at freebsd ~]# scp test.tgz 172.16.3.10:.
> Password:
> test.tgz 28% 17MB 75.3KB/s 09:32 ETA
>
>
> For comparision, we did a similiar test with Linux, which didn't show
> this behaviour:
>
> root at linux:~# scp jdk-6u33-linux-x64.bin 172.16.4.50:
> root at 172.16.4.50's password:
> jdk-6u33-linux-x64.bin 100%
> 69MB 3.4MB/s 00:20
> root at linux:~#
>
>
> Otherwise, the servers are really fast, when copying data to a machine
> nearby:
>
> [root at freebsd ~]# ls -alh test
> -rw-r--r-- 1 root wheel 1G Nov 21 13:43 test
> [root at freebsd ~]# scp test 172.16.3.11:
> Password:
> test 100% 1000MB 38.5MB/s 00:26
>
>
> Intercontinental ftp downloads are the same:
>
> [root at freebsd ~]# fetch
> ftp://ftp1.us.freebsd.org/pub/FreeBSD/releases/amd64/amd64/ISO-IMAGES/9.1/FreeBSD-9.1-RC3-amd64-bootonly.iso
> FreeBSD-9.1-RC3-amd64-bootonly.iso 100% of 146 MB 46 MBps
>
> [root at freebsd ~]# fetch
> ftp://ftp1.us.freebsd.org/pub/FreeBSD/releases/amd64/amd64/ISO-IMAGES/9.1/FreeBSD-9.1-RC3-amd64-disc1.iso
>
> FreeBSD-9.1-RC3-amd64-disc1.iso 100% of 685 MB 36 MBps 00m00s
>
> [root at freebsd ~]# fetch
> ftp://ftp1.de.freebsd.org/pub/FreeBSD/releases/amd64/amd64/ISO-IMAGES/9.1/FreeBSD-9.1-RC3-amd64-disc1.iso
> FreeBSD-9.1-RC3-amd64-disc1.iso 0% of 685 MB 13 kBps 14h49m^C
>
>
> Linux:
>
> root at linux:~# wget
> ftp://ftp1.de.freebsd.org/pub/FreeBSD/releases/amd64/amd64/ISO-IMAGES/9.1/FreeBSD-9.1-RC3-amd64-disc1.iso
> --2012-11-21 15:07:57--
> ftp://ftp1.de.freebsd.org/pub/FreeBSD/releases/amd64/amd64/ISO-IMAGES/9.1/FreeBSD-9.1-RC3-amd64-disc1.iso
> => `FreeBSD-9.1-RC3-amd64-disc1.iso'
> Resolving ftp1.de.freebsd.org... 137.226.34.42
> Connecting to ftp1.de.freebsd.org|137.226.34.42|:21... connected.
> Logging in as anonymous ... Logged in!
> ==> SYST ... done. ==> PWD ... done.
> ==> TYPE I ... done. ==> CWD (1)
> /pub/FreeBSD/releases/amd64/amd64/ISO-IMAGES/9.1 ... done.
> ==> SIZE FreeBSD-9.1-RC3-amd64-disc1.iso ... 718800896
> ==> PASV ... done. ==> RETR FreeBSD-9.1-RC3-amd64-disc1.iso ... done.
> Length: 718800896 (686M) (unauthoritative)
>
> 100%[=====================================================================>]
> 718,800,896 19.1M/s in 61s
>
> 2012-11-21 15:09:01 (11.2 MB/s) - `FreeBSD-9.1-RC3-amd64-disc1.iso'
> saved [718800896]
>
>
> Doing some googling brought up a lot of tuning hints, but nothing worked
> for us. We tweaked some sysctls:
>
> kern.ipc.maxsockbuf=16777216
> net.inet.tcp.sendbuf_max=16777216
> net.inet.tcp.recvbuf_max=16777216
> net.inet.tcp.sendbuf_inc=16384
> net.inet.tcp.recvbuf_inc=524288
> net.inet.tcp.hostcache.expire=1
>
> but to no good. Disabling MSI and TSO4 for the card didn't change
> anything, too.
>
> The machines are all HP DL360G7 with bce cards (find dmesg, ifconfig and
> pciconf -lvc at the end of this mail).
>
> Can someone hit me with a cluestick to get the BSDs on speed?
>
> marc
>
> PS: The version is FreeBSD-RC2 amd64, because we need the patch for
> process migration on the CPUs which didn't make it 9.0 or an errata, as
> we were the only ones, hitting this bug (so kib@ said).
>
> ifconfig:
> [root at freebsd ~]# ifconfig
> bce0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
> options=c01bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE>
> ether ac:16:2d:b7:00:f4
> inet 172.16.3.10 netmask 0xffffff00 broadcast 172.16.3.255
> inet6 fe80::ae16:2dff:feb7:f4%bce0 prefixlen 64 scopeid 0x1
> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> media: Ethernet autoselect (1000baseT <full-duplex>)
> status: active
> bce1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
> options=c01bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE>
> ether ac:16:2d:b7:00:f6
> inet 172.17.3.10 netmask 0xfffff800 broadcast 172.17.7.255
> inet6 fe80::ae16:2dff:feb7:f6%bce1 prefixlen 64 scopeid 0x2
> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> media: Ethernet autoselect (1000baseT <full-duplex,master>)
> status: active
> bce2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
> options=c01bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE>
> ether ac:16:2d:b7:00:fc
> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> media: Ethernet autoselect
> bce3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
> options=c01bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE>
> ether ac:16:2d:b7:00:fe
> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> media: Ethernet autoselect
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
> options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
> inet6 ::1 prefixlen 128
> inet6 fe80::1%lo0 prefixlen 64 scopeid 0xb
> inet 127.0.0.1 netmask 0xff000000
> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
>
> pciconf -lvc:
> [root at freebsd ~]# pciconf -lvc
> hostb0 at pci0:0:0:0: class=0x060000 card=0x330b103c chip=0x34068086
> rev=0x13 hdr=0x00
> vendor = 'Intel Corporation'
> device = '5520 I/O Hub to ESI Port'
> class = bridge
> subclass = HOST-PCI
> cap 05[60] = MSI supports 2 messages, vector masks
> cap 10[90] = PCI-Express 2 root port max data 128(128) link x4(x4)
> cap 01[e0] = powerspec 3 supports D0 D3 current D0
> ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
> ecap 000d[150] = unknown 1
> ecap 000b[160] = unknown 0
> pcib1 at pci0:0:1:0: class=0x060400 card=0x330b103c chip=0x34088086
> rev=0x13 hdr=0x01
> vendor = 'Intel Corporation'
> device = '5520/5500/X58 I/O Hub PCI Express Root Port 1'
> class = bridge
> subclass = PCI-PCI
> cap 0d[40] = PCI Bridge card=0x330b103c
> cap 05[60] = MSI supports 2 messages, vector masks
> cap 10[90] = PCI-Express 2 root port max data 256(256) link x4(x4)
> cap 01[e0] = powerspec 3 supports D0 D3 current D0
> ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
> ecap 000d[150] = unknown 1
> ecap 000b[160] = unknown 0
> pcib2 at pci0:0:2:0: class=0x060400 card=0x330b103c chip=0x34098086
> rev=0x13 hdr=0x01
> vendor = 'Intel Corporation'
> device = '5520/5500/X58 I/O Hub PCI Express Root Port 2'
> class = bridge
> subclass = PCI-PCI
> cap 0d[40] = PCI Bridge card=0x330b103c
> cap 05[60] = MSI supports 2 messages, vector masks
> cap 10[90] = PCI-Express 2 root port max data 256(256) link x0(x4)
> cap 01[e0] = powerspec 3 supports D0 D3 current D0
> ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
> ecap 000d[150] = unknown 1
> pcib3 at pci0:0:3:0: class=0x060400 card=0x330b103c chip=0x340a8086
> rev=0x13 hdr=0x01
> vendor = 'Intel Corporation'
> device = '5520/5500/X58 I/O Hub PCI Express Root Port 3'
> class = bridge
> subclass = PCI-PCI
> cap 0d[40] = PCI Bridge card=0x330b103c
> cap 05[60] = MSI supports 2 messages, vector masks
> cap 10[90] = PCI-Express 2 root port max data 256(256) link x0(x16)
> cap 01[e0] = powerspec 3 supports D0 D3 current D0
> ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
> ecap 000d[150] = unknown 1
> ecap 000b[160] = unknown 0
> pcib4 at pci0:0:4:0: class=0x060400 card=0x330b103c chip=0x340b8086
> rev=0x13 hdr=0x01
> vendor = 'Intel Corporation'
> device = '5520/X58 I/O Hub PCI Express Root Port 4'
> class = bridge
> subclass = PCI-PCI
> cap 0d[40] = PCI Bridge card=0x330b103c
> cap 05[60] = MSI supports 2 messages, vector masks
> cap 10[90] = PCI-Express 2 root port max data 256(256) link x0(x4)
> cap 01[e0] = powerspec 3 supports D0 D3 current D0
> ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
> ecap 000d[150] = unknown 1
> pcib5 at pci0:0:5:0: class=0x060400 card=0x330b103c chip=0x340c8086
> rev=0x13 hdr=0x01
> vendor = 'Intel Corporation'
> device = '5520/X58 I/O Hub PCI Express Root Port 5'
> class = bridge
> subclass = PCI-PCI
> cap 0d[40] = PCI Bridge card=0x330b103c
> cap 05[60] = MSI supports 2 messages, vector masks
> cap 10[90] = PCI-Express 2 root port max data 256(256) link x0(x4)
> cap 01[e0] = powerspec 3 supports D0 D3 current D0
> ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
> ecap 000d[150] = unknown 1
> pcib6 at pci0:0:6:0: class=0x060400 card=0x330b103c chip=0x340d8086
> rev=0x13 hdr=0x01
> vendor = 'Intel Corporation'
> device = '5520/X58 I/O Hub PCI Express Root Port 6'
> class = bridge
> subclass = PCI-PCI
> cap 0d[40] = PCI Bridge card=0x330b103c
> cap 05[60] = MSI supports 2 messages, vector masks
> cap 10[90] = PCI-Express 2 root port max data 256(256) link x0(x4)
> cap 01[e0] = powerspec 3 supports D0 D3 current D0
> ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
> ecap 000d[150] = unknown 1
> pcib7 at pci0:0:7:0: class=0x060400 card=0x330b103c chip=0x340e8086
> rev=0x13 hdr=0x01
> vendor = 'Intel Corporation'
> device = '5520/5500/X58 I/O Hub PCI Express Root Port 7'
> class = bridge
> subclass = PCI-PCI
> cap 0d[40] = PCI Bridge card=0x330b103c
> cap 05[60] = MSI supports 2 messages, vector masks
> cap 10[90] = PCI-Express 2 root port max data 256(256) link x4(x4)
> cap 01[e0] = powerspec 3 supports D0 D3 current D0
> ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
> ecap 000d[150] = unknown 1
> ecap 000b[160] = unknown 0
> pcib8 at pci0:0:8:0: class=0x060400 card=0x330b103c chip=0x340f8086
> rev=0x13 hdr=0x01
> vendor = 'Intel Corporation'
> device = '5520/5500/X58 I/O Hub PCI Express Root Port 8'
> class = bridge
> subclass = PCI-PCI
> cap 0d[40] = PCI Bridge card=0x330b103c
> cap 05[60] = MSI supports 2 messages, vector masks
> cap 10[90] = PCI-Express 2 root port max data 256(256) link x4(x4)
> cap 01[e0] = powerspec 3 supports D0 D3 current D0
> ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
> ecap 000d[150] = unknown 1
> pcib9 at pci0:0:9:0: class=0x060400 card=0x330b103c chip=0x34108086
> rev=0x13 hdr=0x01
> vendor = 'Intel Corporation'
> device = '5520/5500/X58 I/O Hub PCI Express Root Port 9'
> class = bridge
> subclass = PCI-PCI
> cap 0d[40] = PCI Bridge card=0x330b103c
> cap 05[60] = MSI supports 2 messages, vector masks
> cap 10[90] = PCI-Express 2 root port max data 256(256) link x0(x8)
> cap 01[e0] = powerspec 3 supports D0 D3 current D0
> ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
> ecap 000d[150] = unknown 1
> pcib10 at pci0:0:10:0: class=0x060400 card=0x330b103c chip=0x34118086
> rev=0x13 hdr=0x01
> vendor = 'Intel Corporation'
> device = '5520/5500/X58 I/O Hub PCI Express Root Port 10'
> class = bridge
> subclass = PCI-PCI
> cap 0d[40] = PCI Bridge card=0x330b103c
> cap 05[60] = MSI supports 2 messages, vector masks
> cap 10[90] = PCI-Express 2 root port max data 256(256) link x0(x4)
> cap 01[e0] = powerspec 3 supports D0 D3 current D0
> ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
> ecap 000d[150] = unknown 1
> hostb1 at pci0:0:13:0: class=0x060000 card=0x00000000 chip=0x343a8086
> rev=0x13 hdr=0x00
> vendor = 'Intel Corporation'
> class = bridge
> subclass = HOST-PCI
> cap 10[40] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
> cap 00[60] = unknown
> ecap 000b[100] = unknown 0
> ecap 000b[800] = unknown 0
> hostb2 at pci0:0:13:1: class=0x060000 card=0x00000000 chip=0x343b8086
> rev=0x13 hdr=0x00
> vendor = 'Intel Corporation'
> class = bridge
> subclass = HOST-PCI
> cap 10[40] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
> cap 00[60] = unknown
> ecap 000b[100] = unknown 0
> ecap 000b[800] = unknown 0
> hostb3 at pci0:0:13:2: class=0x060000 card=0x00000000 chip=0x343c8086
> rev=0x13 hdr=0x00
> vendor = 'Intel Corporation'
> class = bridge
> subclass = HOST-PCI
> cap 10[40] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
> cap 00[60] = unknown
> hostb4 at pci0:0:13:3: class=0x060000 card=0x00000000 chip=0x343d8086
> rev=0x13 hdr=0x00
> vendor = 'Intel Corporation'
> class = bridge
> subclass = HOST-PCI
> cap 10[40] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
> cap 00[60] = unknown
> ecap 000b[100] = unknown 0
> hostb5 at pci0:0:13:4: class=0x060000 card=0x00000000 chip=0x34188086
> rev=0x13 hdr=0x00
> vendor = 'Intel Corporation'
> device = '5520/5500/X58 Physical Layer Port 0'
> class = bridge
> subclass = HOST-PCI
> cap 10[40] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
> cap 00[60] = unknown
> hostb6 at pci0:0:13:5: class=0x060000 card=0x00000000 chip=0x34198086
> rev=0x13 hdr=0x00
> vendor = 'Intel Corporation'
> device = '5520/5500 Physical Layer Port 1'
> class = bridge
> subclass = HOST-PCI
> cap 10[40] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
> cap 00[60] = unknown
> hostb7 at pci0:0:13:6: class=0x060000 card=0x00000000 chip=0x341a8086
> rev=0x13 hdr=0x00
> vendor = 'Intel Corporation'
> class = bridge
> subclass = HOST-PCI
> cap 10[40] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
> cap 00[60] = unknown
> hostb8 at pci0:0:14:0: class=0x060000 card=0x00000000 chip=0x341c8086
> rev=0x13 hdr=0x00
> vendor = 'Intel Corporation'
> class = bridge
> subclass = HOST-PCI
> cap 10[40] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
> cap 00[60] = unknown
> ecap 000b[100] = unknown 0
> hostb9 at pci0:0:14:1: class=0x060000 card=0x00000000 chip=0x341d8086
> rev=0x13 hdr=0x00
> vendor = 'Intel Corporation'
> class = bridge
> subclass = HOST-PCI
> cap 10[40] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
> cap 00[60] = unknown
> hostb10 at pci0:0:14:2: class=0x060000 card=0x00000000 chip=0x341e8086
> rev=0x13 hdr=0x00
> vendor = 'Intel Corporation'
> class = bridge
> subclass = HOST-PCI
> cap 10[40] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
> cap 00[60] = unknown
> hostb11 at pci0:0:14:3: class=0x060000 card=0x00000000 chip=0x341f8086
> rev=0x13 hdr=0x00
> vendor = 'Intel Corporation'
> class = bridge
> subclass = HOST-PCI
> cap 10[40] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
> cap 00[60] = unknown
> hostb12 at pci0:0:14:4: class=0x060000 card=0x00000000 chip=0x34398086
> rev=0x13 hdr=0x00
> vendor = 'Intel Corporation'
> class = bridge
> subclass = HOST-PCI
> cap 10[40] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
> none0 at pci0:0:20:0: class=0x080000 card=0x000b003c chip=0x342e8086
> rev=0x13 hdr=0x00
> vendor = 'Intel Corporation'
> device = '5520/5500/X58 I/O Hub System Management Registers'
> class = base peripheral
> subclass = interrupt controller
> cap 10[40] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
> none1 at pci0:0:20:1: class=0x080000 card=0x000b003c chip=0x34228086
> rev=0x13 hdr=0x00
> vendor = 'Intel Corporation'
> device = '5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers'
> class = base peripheral
> subclass = interrupt controller
> cap 10[40] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
> none2 at pci0:0:20:2: class=0x080000 card=0x000b003c chip=0x34238086
> rev=0x13 hdr=0x00
> vendor = 'Intel Corporation'
> device = '5520/5500/X58 I/O Hub Control Status and RAS Registers'
> class = base peripheral
> subclass = interrupt controller
> cap 10[40] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
> pcib11 at pci0:0:28:0: class=0x060400 card=0x330d103c chip=0x3a408086
> rev=0x00 hdr=0x01
> vendor = 'Intel Corporation'
> device = '82801JI (ICH10 Family) PCI Express Root Port 1'
> class = bridge
> subclass = PCI-PCI
> cap 10[40] = PCI-Express 1 root port max data 128(128) link x0(x4)
> cap 05[80] = MSI supports 1 message
> cap 0d[90] = PCI Bridge card=0x330d103c
> cap 01[a0] = powerspec 2 supports D0 D3 current D0
> ecap 0002[100] = VC 1 max VC0
> ecap 0005[180] = unknown 1
> pcib12 at pci0:0:28:4: class=0x060400 card=0x330d103c chip=0x3a488086
> rev=0x00 hdr=0x01
> vendor = 'Intel Corporation'
> device = '82801JI (ICH10 Family) PCI Express Root Port 5'
> class = bridge
> subclass = PCI-PCI
> cap 10[40] = PCI-Express 1 root port max data 128(128) link x1(x1)
> cap 05[80] = MSI supports 1 message
> cap 0d[90] = PCI Bridge card=0x330d103c
> cap 01[a0] = powerspec 2 supports D0 D3 current D0
> ecap 0002[100] = VC 1 max VC0
> ecap 0005[180] = unknown 1
> uhci1 at pci0:0:29:0: class=0x0c0300 card=0x330d103c chip=0x3a348086
> rev=0x00 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801JI (ICH10 Family) USB UHCI Controller'
> class = serial bus
> subclass = USB
> cap 13[50] = PCI Advanced Features: FLR TP
> uhci2 at pci0:0:29:1: class=0x0c0300 card=0x330d103c chip=0x3a358086
> rev=0x00 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801JI (ICH10 Family) USB UHCI Controller'
> class = serial bus
> subclass = USB
> cap 13[50] = PCI Advanced Features: FLR TP
> uhci3 at pci0:0:29:2: class=0x0c0300 card=0x330d103c chip=0x3a368086
> rev=0x00 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801JI (ICH10 Family) USB UHCI Controller'
> class = serial bus
> subclass = USB
> cap 13[50] = PCI Advanced Features: FLR TP
> uhci4 at pci0:0:29:3: class=0x0c0300 card=0x330d103c chip=0x3a398086
> rev=0x00 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801JI (ICH10 Family) USB UHCI Controller'
> class = serial bus
> subclass = USB
> cap 13[50] = PCI Advanced Features: FLR TP
> ehci0 at pci0:0:29:7: class=0x0c0320 card=0x330d103c chip=0x3a3a8086
> rev=0x00 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801JI (ICH10 Family) USB2 EHCI Controller'
> class = serial bus
> subclass = USB
> cap 01[50] = powerspec 2 supports D0 D3 current D0
> cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
> cap 13[98] = PCI Advanced Features: FLR TP
> pcib13 at pci0:0:30:0: class=0x060401 card=0x330d103c chip=0x244e8086
> rev=0x90 hdr=0x01
> vendor = 'Intel Corporation'
> device = '82801 PCI Bridge'
> class = bridge
> subclass = PCI-PCI
> cap 0d[50] = PCI Bridge card=0x330d103c
> isab0 at pci0:0:31:0: class=0x060100 card=0x00000000 chip=0x3a188086
> rev=0x00 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801JIB (ICH10) LPC Interface Controller'
> class = bridge
> subclass = PCI-ISA
> cap 09[e0] = vendor (length 12) Intel cap 1 version 0
> features: Quick Resume, SATA RAID-5, 4 PCI-e x1 slots, SATA RAID-0/1/10
> atapci0 at pci0:0:31:2: class=0x01018f card=0x330d103c chip=0x3a208086
> rev=0x00 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801JI (ICH10 Family) 4 port SATA IDE Controller'
> class = mass storage
> subclass = ATA
> cap 01[70] = powerspec 3 supports D0 D3 current D0
> cap 13[b0] = PCI Advanced Features: FLR TP
> ciss0 at pci0:5:0:0: class=0x010400 card=0x3245103c chip=0x323a103c
> rev=0x01 hdr=0x00
> vendor = 'Hewlett-Packard Company'
> device = 'Smart Array G6 controllers'
> class = mass storage
> subclass = RAID
> cap 01[40] = powerspec 3 supports D0 D3 current D0
> cap 05[50] = MSI supports 1 message, 64 bit
> cap 10[70] = PCI-Express 2 endpoint max data 256(256) link x4(x8)
> cap 11[ac] = MSI-X supports 16 messages in map 0x10 enabled
> ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
> bce0 at pci0:3:0:0: class=0x020000 card=0x7055103c chip=0x163914e4 rev=0x20
> hdr=0x00
> vendor = 'Broadcom Corporation'
> device = 'NetXtreme II BCM5709 Gigabit Ethernet'
> class = network
> subclass = ethernet
> cap 01[48] = powerspec 3 supports D0 D3 current D0
> cap 03[50] = VPD
> cap 05[58] = MSI supports 16 messages, 64 bit enabled with 1 message
> cap 11[a0] = MSI-X supports 9 messages in map 0x10
> cap 10[ac] = PCI-Express 2 endpoint max data 256(512) link x4(x4)
> ecap 0003[100] = Serial 1 ac162dfffeb700f4
> ecap 0001[110] = AER 1 0 fatal 1 non-fatal 1 corrected
> ecap 0004[150] = unknown 1
> ecap 0002[160] = VC 1 max VC0
> bce1 at pci0:3:0:1: class=0x020000 card=0x7055103c chip=0x163914e4 rev=0x20
> hdr=0x00
> vendor = 'Broadcom Corporation'
> device = 'NetXtreme II BCM5709 Gigabit Ethernet'
> class = network
> subclass = ethernet
> cap 01[48] = powerspec 3 supports D0 D3 current D0
> cap 03[50] = VPD
> cap 05[58] = MSI supports 16 messages, 64 bit enabled with 1 message
> cap 11[a0] = MSI-X supports 9 messages in map 0x10
> cap 10[ac] = PCI-Express 2 endpoint max data 256(512) link x4(x4)
> ecap 0003[100] = Serial 1 ac162dfffeb700f6
> ecap 0001[110] = AER 1 0 fatal 1 non-fatal 1 corrected
> ecap 0004[150] = unknown 1
> ecap 0002[160] = VC 1 max VC0
> bce2 at pci0:4:0:0: class=0x020000 card=0x7055103c chip=0x163914e4 rev=0x20
> hdr=0x00
> vendor = 'Broadcom Corporation'
> device = 'NetXtreme II BCM5709 Gigabit Ethernet'
> class = network
> subclass = ethernet
> cap 01[48] = powerspec 3 supports D0 D3 current D0
> cap 03[50] = VPD
> cap 05[58] = MSI supports 16 messages, 64 bit enabled with 1 message
> cap 11[a0] = MSI-X supports 9 messages in map 0x10
> cap 10[ac] = PCI-Express 2 endpoint max data 256(512) link x4(x4)
> ecap 0003[100] = Serial 1 ac162dfffeb700fc
> ecap 0001[110] = AER 1 0 fatal 1 non-fatal 1 corrected
> ecap 0004[150] = unknown 1
> ecap 0002[160] = VC 1 max VC0
> bce3 at pci0:4:0:1: class=0x020000 card=0x7055103c chip=0x163914e4 rev=0x20
> hdr=0x00
> vendor = 'Broadcom Corporation'
> device = 'NetXtreme II BCM5709 Gigabit Ethernet'
> class = network
> subclass = ethernet
> cap 01[48] = powerspec 3 supports D0 D3 current D0
> cap 03[50] = VPD
> cap 05[58] = MSI supports 16 messages, 64 bit enabled with 1 message
> cap 11[a0] = MSI-X supports 9 messages in map 0x10
> cap 10[ac] = PCI-Express 2 endpoint max data 256(512) link x4(x4)
> ecap 0003[100] = Serial 1 ac162dfffeb700fe
> ecap 0001[110] = AER 1 0 fatal 1 non-fatal 1 corrected
> ecap 0004[150] = unknown 1
> ecap 0002[160] = VC 1 max VC0
> none3 at pci0:2:0:0: class=0x088000 card=0x3309103c chip=0x3306103c
> rev=0x04 hdr=0x00
> vendor = 'Hewlett-Packard Company'
> device = 'Integrated Lights-Out Standard Slave Instrumentation &
> System Support'
> class = base peripheral
> cap 01[78] = powerspec 3 supports D0 D3 current D0
> cap 05[b0] = MSI supports 1 message, 64 bit
> cap 10[c0] = PCI-Express 1 legacy endpoint max data 128(128) link x1(x1)
> none4 at pci0:2:0:2: class=0x088000 card=0x3309103c chip=0x3307103c
> rev=0x04 hdr=0x00
> vendor = 'Hewlett-Packard Company'
> device = 'Integrated Lights-Out Standard Management Processor
> Support and Messaging'
> class = base peripheral
> cap 01[78] = powerspec 3 supports D0 D3 current D0
> cap 05[b0] = MSI supports 1 message, 64 bit
> cap 10[c0] = PCI-Express 1 legacy endpoint max data 128(128) link x1(x1)
> uhci0 at pci0:2:0:4: class=0x0c0300 card=0x3309103c chip=0x3300103c
> rev=0x01 hdr=0x00
> vendor = 'Hewlett-Packard Company'
> device = 'Integrated Lights-Out Standard Virtual USB Controller'
> class = serial bus
> subclass = USB
> cap 05[70] = MSI supports 1 message, 64 bit
> cap 10[80] = PCI-Express 1 legacy endpoint max data 128(128) link x1(x1)
> cap 01[f0] = powerspec 3 supports D0 D3 current D0
> vgapci0 at pci0:1:3:0: class=0x030000 card=0x31fb103c chip=0x515e1002
> rev=0x02 hdr=0x00
> vendor = 'ATI Technologies Inc'
> device = 'ES1000'
> class = display
> subclass = VGA
> cap 01[50] = powerspec 2 supports D0 D1 D2 D3 current D0
>
> dmesg:
> [root at freebsd ~]# dmesg
> Copyright (c) 1992-2012 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 9.1-RC2 #0 r241106: Mon Oct 1 18:26:44 UTC 2012
> root at farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
> CPU: Intel(R) Xeon(R) CPU X5660 @ 2.80GHz (2800.16-MHz
> K8-class CPU)
> Origin = "GenuineIntel" Id = 0x206c2 Family = 6 Model = 2c
> Stepping = 2
>
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>
> Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
> AMD Features2=0x1<LAHF>
> TSC: P-state invariant, performance statistics
> real memory = 34359738368 (32768 MB)
> avail memory = 33095315456 (31562 MB)
> Event timer "LAPIC" quality 600
> ACPI APIC Table: <HP ProLiant>
> FreeBSD/SMP: Multiprocessor System Detected: 24 CPUs
> FreeBSD/SMP: 2 package(s) x 6 core(s) x 2 SMT threads
> cpu0 (BSP): APIC ID: 0
> cpu1 (AP): APIC ID: 1
> cpu2 (AP): APIC ID: 2
> cpu3 (AP): APIC ID: 3
> cpu4 (AP): APIC ID: 4
> cpu5 (AP): APIC ID: 5
> cpu6 (AP): APIC ID: 16
> cpu7 (AP): APIC ID: 17
> cpu8 (AP): APIC ID: 18
> cpu9 (AP): APIC ID: 19
> cpu10 (AP): APIC ID: 20
> cpu11 (AP): APIC ID: 21
> cpu12 (AP): APIC ID: 32
> cpu13 (AP): APIC ID: 33
> cpu14 (AP): APIC ID: 34
> cpu15 (AP): APIC ID: 35
> cpu16 (AP): APIC ID: 36
> cpu17 (AP): APIC ID: 37
> cpu18 (AP): APIC ID: 48
> cpu19 (AP): APIC ID: 49
> cpu20 (AP): APIC ID: 50
> cpu21 (AP): APIC ID: 51
> cpu22 (AP): APIC ID: 52
> cpu23 (AP): APIC ID: 53
> ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16
> (20110527/tbfadt-638)
> ACPI Warning: Invalid length for Pm2ControlBlock: 32, using default 8
> (20110527/tbfadt-638)
> ioapic1 <Version 2.0> irqs 24-47 on motherboard
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> kbd1 at kbdmux0
> ctl: CAM Target Layer loaded
> acpi0: <HP ProLiant> on motherboard
> acpi0: Power Button (fixed)
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> cpu2: <ACPI CPU> on acpi0
> cpu3: <ACPI CPU> on acpi0
> cpu4: <ACPI CPU> on acpi0
> cpu5: <ACPI CPU> on acpi0
> cpu6: <ACPI CPU> on acpi0
> cpu7: <ACPI CPU> on acpi0
> cpu8: <ACPI CPU> on acpi0
> cpu9: <ACPI CPU> on acpi0
> cpu10: <ACPI CPU> on acpi0
> cpu11: <ACPI CPU> on acpi0
> cpu12: <ACPI CPU> on acpi0
> cpu13: <ACPI CPU> on acpi0
> cpu14: <ACPI CPU> on acpi0
> cpu15: <ACPI CPU> on acpi0
> cpu16: <ACPI CPU> on acpi0
> cpu17: <ACPI CPU> on acpi0
> cpu18: <ACPI CPU> on acpi0
> cpu19: <ACPI CPU> on acpi0
> cpu20: <ACPI CPU> on acpi0
> cpu21: <ACPI CPU> on acpi0
> cpu22: <ACPI CPU> on acpi0
> cpu23: <ACPI CPU> on acpi0
> attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 950
> Event timer "HPET" frequency 14318180 Hz quality 450
> Event timer "HPET1" frequency 14318180 Hz quality 440
> Event timer "HPET2" frequency 14318180 Hz quality 440
> Event timer "HPET3" frequency 14318180 Hz quality 440
> atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
> Event timer "RTC" frequency 32768 Hz quality 0
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
> pcib0: <ACPI Host-PCI bridge> on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci5: <ACPI PCI bus> on pcib1
> ciss0: <HP Smart Array P410i> port 0x4000-0x40ff mem
> 0xfbe00000-0xfbffffff,0xfbdf0000-0xfbdf0fff irq 28 at device 0.0 on pci5
> ciss0: PERFORMANT Transport
> pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
> pci12: <ACPI PCI bus> on pcib2
> pcib3: <ACPI PCI-PCI bridge> at device 3.0 on pci0
> pci9: <ACPI PCI bus> on pcib3
> pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0
> pci13: <ACPI PCI bus> on pcib4
> pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0
> pci14: <ACPI PCI bus> on pcib5
> pcib6: <ACPI PCI-PCI bridge> at device 6.0 on pci0
> pci15: <ACPI PCI bus> on pcib6
> pcib7: <ACPI PCI-PCI bridge> at device 7.0 on pci0
> pci3: <ACPI PCI bus> on pcib7
> bce0: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> mem
> 0xf4000000-0xf5ffffff irq 30 at device 0.0 on pci3
> miibus0: <MII bus> on bce0
> brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0
> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
> bce0: Ethernet address: ac:16:2d:b7:00:f4
> bce0: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3);
> Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.12)
> Coal (RX:6,6,18,18; TX:20,20,80,80)
> bce1: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> mem
> 0xf2000000-0xf3ffffff irq 37 at device 0.1 on pci3
> miibus1: <MII bus> on bce1
> brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1
> brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
> bce1: Ethernet address: ac:16:2d:b7:00:f6
> bce1: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3);
> Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.12)
> Coal (RX:6,6,18,18; TX:20,20,80,80)
> pcib8: <ACPI PCI-PCI bridge> at device 8.0 on pci0
> pci4: <ACPI PCI bus> on pcib8
> bce2: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> mem
> 0xf8000000-0xf9ffffff irq 31 at device 0.0 on pci4
> miibus2: <MII bus> on bce2
> brgphy2: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus2
> brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
> bce2: Ethernet address: ac:16:2d:b7:00:fc
> bce2: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3);
> Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.12)
> Coal (RX:6,6,18,18; TX:20,20,80,80)
> bce3: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> mem
> 0xf6000000-0xf7ffffff irq 39 at device 0.1 on pci4
> miibus3: <MII bus> on bce3
> brgphy3: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus3
> brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
> bce3: Ethernet address: ac:16:2d:b7:00:fe
> bce3: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3);
> Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.12)
> Coal (RX:6,6,18,18; TX:20,20,80,80)
> pcib9: <ACPI PCI-PCI bridge> at device 9.0 on pci0
> pci6: <ACPI PCI bus> on pcib9
> pcib10: <ACPI PCI-PCI bridge> at device 10.0 on pci0
> pci16: <ACPI PCI bus> on pcib10
> pci0: <base peripheral, interrupt controller> at device 20.0 (no driver
> attached)
> pci0: <base peripheral, interrupt controller> at device 20.1 (no driver
> attached)
> pci0: <base peripheral, interrupt controller> at device 20.2 (no driver
> attached)
> pcib11: <ACPI PCI-PCI bridge> at device 28.0 on pci0
> pci17: <ACPI PCI bus> on pcib11
> pcib12: <ACPI PCI-PCI bridge> at device 28.4 on pci0
> pci2: <ACPI PCI bus> on pcib12
> pci2: <base peripheral> at device 0.0 (no driver attached)
> pci2: <base peripheral> at device 0.2 (no driver attached)
> uhci0: <UHCI (generic) USB controller> port 0x3c00-0x3c1f irq 17 at
> device 0.4 on pci2
> usbus0 on uhci0
> uhci1: <Intel 82801JI (ICH10) USB controller USB-A> port 0x1000-0x101f
> irq 20 at device 29.0 on pci0
> usbus1 on uhci1
> uhci2: <Intel 82801JI (ICH10) USB controller USB-B> port 0x1020-0x103f
> irq 23 at device 29.1 on pci0
> usbus2 on uhci2
> uhci3: <Intel 82801JI (ICH10) USB controller USB-C> port 0x1040-0x105f
> irq 22 at device 29.2 on pci0
> usbus3 on uhci3
> uhci4: <Intel 82801JI (ICH10) USB controller USB-F> port 0x1060-0x107f
> irq 23 at device 29.3 on pci0
> usbus4 on uhci4
> ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem
> 0xf1bf0000-0xf1bf03ff irq 20 at device 29.7 on pci0
> usbus5: EHCI version 1.0
> usbus5 on ehci0
> pcib13: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci1: <ACPI PCI bus> on pcib13
> vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem
> 0xe8000000-0xefffffff,0xf1cf0000-0xf1cfffff irq 23 at device 3.0 on pci1
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH10 SATA300 controller> port
> 0x1080-0x1087,0x1088-0x108b,0x1090-0x1097,0x1098-0x109b,0x10a0-0x10af,0x10b0-0x10bf
> irq 17 at device 31.2 on pci0
> ata2: <ATA channel> at channel 0 on atapci0
> ata3: <ATA channel> at channel 1 on atapci0
> acpi_tz0: <Thermal Zone> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq
> 4 flags 0x10 on acpi0
> qpi0: <QPI system bus> on motherboard
> orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> ppc0: cannot reserve I/O port range
> uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8-0x2ff
> irq 3 on isa0
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 16
> device_attach: est0 attach returned 6
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 16
> device_attach: est1 attach returned 6
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> est2: <Enhanced SpeedStep Frequency Control> on cpu2
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 16
> device_attach: est2 attach returned 6
> p4tcc2: <CPU Frequency Thermal Control> on cpu2
> est3: <Enhanced SpeedStep Frequency Control> on cpu3
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 16
> device_attach: est3 attach returned 6
> p4tcc3: <CPU Frequency Thermal Control> on cpu3
> est4: <Enhanced SpeedStep Frequency Control> on cpu4
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 16
> device_attach: est4 attach returned 6
> p4tcc4: <CPU Frequency Thermal Control> on cpu4
> est5: <Enhanced SpeedStep Frequency Control> on cpu5
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 16
> device_attach: est5 attach returned 6
> p4tcc5: <CPU Frequency Thermal Control> on cpu5
> est6: <Enhanced SpeedStep Frequency Control> on cpu6
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 16
> device_attach: est6 attach returned 6
> p4tcc6: <CPU Frequency Thermal Control> on cpu6
> est7: <Enhanced SpeedStep Frequency Control> on cpu7
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 16
> device_attach: est7 attach returned 6
> p4tcc7: <CPU Frequency Thermal Control> on cpu7
> est8: <Enhanced SpeedStep Frequency Control> on cpu8
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 16
> device_attach: est8 attach returned 6
> p4tcc8: <CPU Frequency Thermal Control> on cpu8
> est9: <Enhanced SpeedStep Frequency Control> on cpu9
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 16
> device_attach: est9 attach returned 6
> p4tcc9: <CPU Frequency Thermal Control> on cpu9
> est10: <Enhanced SpeedStep Frequency Control> on cpu10
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 16
> device_attach: est10 attach returned 6
> p4tcc10: <CPU Frequency Thermal Control> on cpu10
> est11: <Enhanced SpeedStep Frequency Control> on cpu11
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 16
> device_attach: est11 attach returned 6
> p4tcc11: <CPU Frequency Thermal Control> on cpu11
> est12: <Enhanced SpeedStep Frequency Control> on cpu12
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 16
> device_attach: est12 attach returned 6
> p4tcc12: <CPU Frequency Thermal Control> on cpu12
> est13: <Enhanced SpeedStep Frequency Control> on cpu13
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 16
> device_attach: est13 attach returned 6
> p4tcc13: <CPU Frequency Thermal Control> on cpu13
> est14: <Enhanced SpeedStep Frequency Control> on cpu14
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 16
> device_attach: est14 attach returned 6
> p4tcc14: <CPU Frequency Thermal Control> on cpu14
> est15: <Enhanced SpeedStep Frequency Control> on cpu15
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 16
> device_attach: est15 attach returned 6
> p4tcc15: <CPU Frequency Thermal Control> on cpu15
> est16: <Enhanced SpeedStep Frequency Control> on cpu16
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 16
> device_attach: est16 attach returned 6
> p4tcc16: <CPU Frequency Thermal Control> on cpu16
> est17: <Enhanced SpeedStep Frequency Control> on cpu17
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 16
> device_attach: est17 attach returned 6
> p4tcc17: <CPU Frequency Thermal Control> on cpu17
> est18: <Enhanced SpeedStep Frequency Control> on cpu18
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 16
> device_attach: est18 attach returned 6
> p4tcc18: <CPU Frequency Thermal Control> on cpu18
> est19: <Enhanced SpeedStep Frequency Control> on cpu19
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 16
> device_attach: est19 attach returned 6
> p4tcc19: <CPU Frequency Thermal Control> on cpu19
> est20: <Enhanced SpeedStep Frequency Control> on cpu20
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 16
> device_attach: est20 attach returned 6
> p4tcc20: <CPU Frequency Thermal Control> on cpu20
> est21: <Enhanced SpeedStep Frequency Control> on cpu21
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 16
> device_attach: est21 attach returned 6
> p4tcc21: <CPU Frequency Thermal Control> on cpu21
> est22: <Enhanced SpeedStep Frequency Control> on cpu22
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 16
> device_attach: est22 attach returned 6
> p4tcc22: <CPU Frequency Thermal Control> on cpu22
> est23: <Enhanced SpeedStep Frequency Control> on cpu23
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 16
> device_attach: est23 attach returned 6
> p4tcc23: <CPU Frequency Thermal Control> on cpu23
> ZFS filesystem version 5
> ZFS storage pool version 28
> Timecounters tick every 1.000 msec
> usbus0: 12Mbps Full Speed USB v1.0
> usbus1: 12Mbps Full Speed USB v1.0
> usbus2: 12Mbps Full Speed USB v1.0
> usbus3: 12Mbps Full Speed USB v1.0
> usbus4: 12Mbps Full Speed USB v1.0
> usbus5: 480Mbps High Speed USB v2.0
> ugen0.1: <0x103c> at usbus0
> uhub0: <0x103c UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> ugen1.1: <Intel> at usbus1
> uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> ugen2.1: <Intel> at usbus2
> uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
> ugen3.1: <Intel> at usbus3
> uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
> ugen4.1: <Intel> at usbus4
> uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
> ugen5.1: <Intel> at usbus5
> uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
> uhub0: 2 ports with 2 removable, self powered
> uhub1: 2 ports with 2 removable, self powered
> uhub2: 2 ports with 2 removable, self powered
> uhub3: 2 ports with 2 removable, self powered
> uhub4: 2 ports with 2 removable, self powered
> ugen0.2: <HP> at usbus0
> ukbd0: <Virtual Keyboard > on usbus0
> kbd2 at ukbd0
> ums0: <Virtual Mouse> on usbus0
> (probe0:ciss0:0:0:0): REPORT LUNS. CDB: a0 0 0 0 0 0 0 0 0 10 0 0
> (probe0:ciss0:0:0:0): CAM status: SCSI Status Error
> (probe0:ciss0:0:0:0): SCSI status: Check Condition
> (probe0:ciss0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid
> command operation code)
> (probe0:ciss0:0:0:0): Error 22, Unretryable error
> da0 at ciss0 bus 0 scbus0 target 0 lun 0
> da0: <COMPAQ RAID 1(1VOLUME OK> Fixed Direct Access SCSI-5 device
> da0: 135.168MB/s transfers
> da0: Command Queueing enabled
> da0: 286070MB (585871964 512 byte sectors: 255H 32S/T 65535C)
> SMP: AP CPU #1 Launched!
> cd0 at ata2 bus 0 scbus2 target 0 lun 0
> cd0: <hp DVD A DS8A8SH KHE4> Removable CD-ROM SCSI-0 device
> SMP: AP CPU #12 Launched!
> cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
> cd0: Attempt to query device size failed: NOT READY, Medium not present
> - tray closed
> SMP: AP CPU #11 Launched!
> SMP: AP CPU #19 Launched!
> SMP: AP CPU #10 Launched!
> SMP: AP CPU #22 Launched!
> SMP: AP CPU #8 Launched!
> SMP: AP CPU #16 Launched!
> SMP: AP CPU #9 Launched!
> SMP: AP CPU #23 Launched!
> SMP: AP CPU #21 Launched!
> SMP: AP CPU #3 Launched!
> SMP: AP CPU #14 Launched!
> SMP: AP CPU #6 Launched!
> SMP: AP CPU #17 Launched!
> SMP: AP CPU #7 Launched!
> SMP: AP CPU #20 Launched!
> SMP: AP CPU #5 Launched!
> SMP: AP CPU #13 Launched!
> SMP: AP CPU #2 Launched!
> SMP: AP CPU #18 Launched!
> SMP: AP CPU #4 Launched!
> SMP: AP CPU #15 Launched!
> Timecounter "TSC-low" frequency 10938126 Hz quality 1000
> uhub5: 8 ports with 8 removable, self powered
> Trying to mount root from ufs:/dev/da0p2 [rw]...
> bce0: link state changed to UP
> bce0: Gigabit link up!
> bce0: Gigabit link up!
> bce0: Gigabit link up!
> bce1: link state changed to UP
> bce1: Gigabit link up!
> bce1: Gigabit link up!
> bce1: Gigabit link up!
>
> _______________________________________________
> freebsd-net at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-net
> To unsubscribe, send any mail to "freebsd-net-unsubscribe at freebsd.org"
More information about the freebsd-net
mailing list