PCI-E VT6130 NIC (if_vge) hang system with gigabit link

[Andrey Smagin]

31 октября 2011, 04:56 от YongHyeon PYUN <pyunyh at gmail.com>:
> On Sat, Oct 29, 2011 at 09:57:30AM +0400, Andrey Smagin wrote:
> >
> > Ok. With autonegotiation ifconfig show speed 100MBit.
> 
> And vge(4) work without problems with the resolved speed/duplex
> of auto-negotiation?
> 
> > with manual 1000baseT full-duplex settings in dmesg:
> > vge0: failed to start MII autopoll
> > vge0: MII read timed out
> > vge0: failed to start MII autopoll
> > vge0: link state changed to UP
> > vge0: MII read timed out
> 
> [...]
> 
> Did vge(4) ever work with 1000baseT on your box?
Hm... I never seen 1000baseT with vge on this box because 
it have only FreeBSD.
> And why you have to manually configure 1000baseT link?
With autonegatiation link stand on 100Mbit full-duplex
> Does link partner(switch) also use auto-negotiation?
In box also present Intel if_em gigabit  and if_nfe gigabit card wich work with 
same cable and partner(switch) at gigabit speed. I only switch connector to if_vge socket.
>