PCI-E VT6130 NIC (if_vge) hang system with gigabit link

[Andrey Smagin]

26 октября 2011, 20:49 от YongHyeon PYUN <pyunyh at gmail.com>:
> On Wed, Oct 26, 2011 at 01:49:14PM +0400, Andrey Smagin wrote:
> > Hi !
> > vge0 at pci0:2:0:0:        class=0x020000 card=0x01101106 chip=0x31191106 rev=0x82 hdr=0x00
> >     vendor     = 'VIA Technologies, Inc.'
> >     device     = 'VT6120/VT6121/VT6122 Gigabit Ethernet Adapter'
> >     class      = network
> >     subclass   = ethernet
> >     bar   [10] = type I/O Port, range 32, base 0x8000, size 256, enabled
> >     bar   [14] = type Memory, range 64, base 0xd4100000, size 256, enabled
> >     cap 01[50] = powerspec 3  supports D0 D1 D2 D3  current D0
> >     cap 10[90] = PCI-Express 1 endpoint max data 128(128) link x1(x1)
> >     cap 05[c0] = MSI supports 1 message, 64 bit, vector masks enabled with 1 message
> > ecap 0001[100] = AER 1 0 fatal 1 non-fatal 6 corrected
> > ecap 0003[130] = Serial 1 0000110600000000
> > vge1 at pci0:1:0:0:        class=0x020000 card=0x01101106 chip=0x31191106 rev=0x82 hdr=0x00
> >     vendor     = 'VIA Technologies, Inc.'
> >     device     = 'VT6120/VT6121/VT6122 Gigabit Ethernet Adapter'
> >     class      = network
> >     subclass   = ethernet
> >     bar   [10] = type I/O Port, range 32, base 0x7000, size 256, enabled
> >     bar   [14] = type Memory, range 64, base 0xd4000000, size 256, enabled
> >     cap 01[50] = powerspec 3  supports D0 D1 D2 D3  current D0
> >     cap 10[90] = PCI-Express 1 endpoint max data 128(128) link x1(x1)
> >     cap 05[c0] = MSI supports 1 message, 64 bit, vector masks enabled with 1 message
> > ecap 0001[100] = AER 1 1 fatal 1 non-fatal 6 corrected
> > ecap 0003[130] = Serial 1 0000110600000000
> >
> > dmesg is empty


 
> Hmm, check whether you have old dmesg file in /var/log directory.
> At least, I need output of 'devinfo -rv' to know which PHY you have.

        pcib4 pnpinfo vendor=0x10de device=0x005d subvendor=0x0000 subdevice=0x0000 class=0x060400 at slot=13 function=0 handle=\_SB_.PCI0.XVR1
            I/O ports:
                0x8000-0x8fff
            I/O memory addresses:
                0xd4100000-0xd41fffff
          pci2
            vge0 pnpinfo vendor=0x1106 device=0x3119 subvendor=0x1106 subdevice=0x0110 class=0x020000 at slot=0 function=0
                Interrupt request lines:
                    256
                pcib4 I/O port window:
                    0x8000-0x80ff
                pcib4 memory window:
                    0xd4100000-0xd41000ff
              miibus1
                ip1000phy0 pnpinfo oui=0x9c3 model=0x19 rev=0x0 at phyno=1
        pcib5 pnpinfo vendor=0x10de device=0x005d subvendor=0x0000 subdevice=0x0000 class=0x060400 at slot=14 function=0 handle=\_SB_.PCI0.XVR0
            I/O ports:
                0x7000-0x7fff
            I/O memory addresses:
                0xd4000000-0xd40fffff
          pci1
            vge1 pnpinfo vendor=0x1106 device=0x3119 subvendor=0x1106 subdevice=0x0110 class=0x020000 at slot=0 function=0
                Interrupt request lines:
                    257
                pcib5 I/O port window:
                    0x7000-0x70ff
                pcib5 memory window:
                    0xd4000000-0xd40000ff
              miibus2
                ip1000phy1 pnpinfo oui=0x9c3 model=0x19 rev=0x0 at phyno=1

> By chance, are you using manual link configuration instead of
> relying on auto-negotiation?

I tried  manual link and auto-negotiation. Now I not remember which mode 
hang system. I will try and write result.



> 
> >
> > 26 октября 2011, 00:11 от YongHyeon PYUN <pyunyh at gmail.com>:
> > > On Tue, Oct 25, 2011 at 10:44:48AM +0400, Andrey Smagin wrote:
> > > > Hi ALL !  If I connect gigabit switch to my card - system hang until I unplug patchcord from device.
> > > > With 100Mbit switch card work good.
> > >
> > > Show me the output of dmesg and 'pciconf -lcbv'.
> > >
> > > > System:  Current - r226163
> > > >
> > >
> >
>