[urtw] Wifi link dying randomly. reboot required to reconnect.
Chuck Burns
break19 at gmail.com
Fri Oct 7 00:03:12 UTC 2011
> Do you have a /dev/dumpdev symbolic link pointing to a swap partition?
> If not, the dump device may not have been configured.
>
> Also, apologies if you said this earlier, but which version of FreeBSD
> are you running?
>
> Gary
I didn't have that link, but I just linked it to my 6G swap partition (I have
4G of ram) at /dev/ada0p2 - using GPT, and zfs-on-root.
I hope the following information is more than enough. :)
Latest kernel panic, with all of the info on the screen.
http://imageshack.us/photo/my-images/707/newcrashw.png/
My filesystems:
zfs list && mount
NAME USED AVAIL REFER MOUNTPOINT
zroot 72.6G 376G 875M /zroot
zroot/tmp 301K 376G 301K /tmp
zroot/usr 71.6G 376G 6.99G /usr
zroot/usr/home 61.7G 376G 61.7G /usr/home
zroot/usr/ports 2.54G 376G 241M /usr/ports
zroot/usr/ports/distfiles 2.30G 376G 2.30G /usr/ports/distfiles
zroot/usr/ports/packages 3.16M 376G 3.16M /usr/ports/packages
zroot/usr/src 314M 376G 314M /usr/src
zroot/var 137M 376G 7.95M /var
zroot/var/crash 22.5K 376G 22.5K /var/crash
zroot/var/db 111M 376G 98.1M /var/db
zroot/var/db/pkg 12.8M 376G 12.8M /var/db/pkg
zroot/var/empty 21K 376G 21K /var/empty
zroot/var/log 175K 376G 175K /var/log
zroot/var/mail 30K 376G 30K /var/mail
zroot/var/run 87K 376G 87K /var/run
zroot/var/tmp 17.9M 376G 17.9M /var/tmp
zroot on / (zfs, local, nfsv4acls)
devfs on /dev (devfs, local, multilabel)
procfs on /proc (procfs, local)
zroot/tmp on /tmp (zfs, local, nosuid, nfsv4acls)
zroot/usr on /usr (zfs, local, nfsv4acls)
zroot/usr/home on /usr/home (zfs, local, nfsv4acls)
zroot/usr/ports on /usr/ports (zfs, local, nosuid, nfsv4acls)
zroot/usr/ports/distfiles on /usr/ports/distfiles (zfs, local, noexec, nosuid,
nfsv4acls)
zroot/usr/ports/packages on /usr/ports/packages (zfs, local, noexec, nosuid,
nfsv4acls)
zroot/usr/src on /usr/src (zfs, local, noexec, nosuid, nfsv4acls)
zroot/var on /var (zfs, local, nfsv4acls)
zroot/var/crash on /var/crash (zfs, local, noexec, nosuid, nfsv4acls)
zroot/var/db on /var/db (zfs, local, noexec, nosuid, nfsv4acls)
zroot/var/db/pkg on /var/db/pkg (zfs, local, nosuid, nfsv4acls)
zroot/var/empty on /var/empty (zfs, local, noexec, nosuid, read-only,
nfsv4acls)
zroot/var/log on /var/log (zfs, local, noexec, nosuid, nfsv4acls)
zroot/var/mail on /var/mail (zfs, local, noexec, nosuid, nfsv4acls)
zroot/var/run on /var/run (zfs, local, noexec, nosuid, nfsv4acls)
zroot/var/tmp on /var/tmp (zfs, local, nosuid, nfsv4acls)
linprocfs on /usr/compat/linux/proc (linprocfs, local)
-----
uname -a:
FreeBSD blackbeast.local 8.2-STABLE FreeBSD 8.2-STABLE #4: Wed Oct 5 22:17:21
CDT 2011 root at blackbeast.local:/usr/obj/usr/src/sys/BLACKBEAST amd64
my kernel config (as you can see, I tried to enable URTW_DEBUG by placing it
into kernel config, but make buildkernel said the option didnt exist, so I
instead modified my urtw.c file to include "#define URTW_DEBUG" at the top)
#
# GENERIC -- Generic kernel configuration file for FreeBSD/amd64
#
# For more information on this file, please read the config(5) manual page,
# and/or the handbook section on Kernel Configuration Files:
#
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-
config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/amd64/conf/GENERIC,v 1.531.2.18 2011/09/16 18:41:19 jhb
Exp $
cpu HAMMER
ident BLACKBEAST
# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.
# Use the following to compile in values accessible to the kernel
# through getenv() (or kenv(1) in userland). The format of the file
# is 'variable=value', see kenv(1)
#
# env "GENERIC.env"
makeoptions DEBUG=-g # Build kernel with gdb(1) debug
symbols
options SCHED_ULE # ULE scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
options INET6 # IPv6 communications protocols
options SCTP # Stream Control Transmission Protocol
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big
directories
options UFS_GJOURNAL # Enable gjournal-based UFS journaling
options MD_ROOT # MD is a potential root device
options NFSCLIENT # Network Filesystem Client
options NFSSERVER # Network Filesystem Server
options NFSLOCKD # Network Lock Manager
options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires
PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_PART_GPT # GUID Partition Tables.
options GEOM_LABEL # Provides labelization
options COMPAT_43TTY # BSD 4.3 TTY compat (sgtty)
options COMPAT_FREEBSD32 # Compatible with i386 binaries
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
options COMPAT_FREEBSD6 # Compatible with FreeBSD6
options COMPAT_FREEBSD7 # Compatible with FreeBSD7
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options STACK # stack(9) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options P1003_1B_SEMAPHORES # POSIX-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time
extensions
options PRINTF_BUFR_SIZE=128 # Prevent printf output being
interspersed.
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4)
options AUDIT # Security event auditing
options MAC # TrustedBSD MAC Framework
options KDTRACE_FRAME # Ensure frames are compiled in
options KDTRACE_HOOKS # Kernel DTrace hooks
options INCLUDE_CONFIG_FILE # Include this file in kernel
options KDB # Kernel debugger related code
options KDB_TRACE # Print a stack trace for a panic
#options KDB_UNATTENDED # Reboot on panic
# Make an SMP-capable kernel by default
options SMP # Symmetric MultiProcessor Kernel
# CPU frequency control
device cpufreq
# Bus support.
device acpi
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering
# SCSI Controllers
device ahc # AHA2940 and onboard AIC7xxx devices
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
device ahd # AHA39320/29320 and onboard AIC79xx devices
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
device amd # AMD 53C974 (Tekram DC-390(T))
device hptiop # Highpoint RocketRaid 3xxx series
device isp # Qlogic family
#device ispfw # Firmware for QLogic HBAs- normally a module
device mpt # LSI-Logic MPT-Fusion
device mps # LSI-Logic MPT-Fusion 2
#device ncr # NCR/Symbios Logic
device sym # NCR/Symbios Logic (newer chipsets + those of
`ncr')
device trm # Tekram DC395U/UW/F DC315U adapters
device adv # Advansys SCSI adapters
device adw # Advansys wide SCSI adapters
device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
device bt # Buslogic/Mylex MultiMaster SCSI adapters
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
device ch # SCSI media changers
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
device ses # SCSI Environmental Services (and SAF-TE)
# RAID controllers interfaced to the SCSI subsystem
device amr # AMI MegaRAID
device arcmsr # Areca SATA II RAID
#XXX it is not 64-bit clean, -scottl
#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
device ciss # Compaq Smart RAID 5*
device dpt # DPT Smartcache III, IV - See NOTES for
options
device hptmv # Highpoint RocketRAID 182x
device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
device iir # Intel Integrated RAID
device ips # IBM (Adaptec) ServeRAID
device mly # Mylex AcceleRAID/eXtremeRAID
device twa # 3ware 9000 series PATA/SATA RAID
# RAID controllers
device aac # Adaptec FSA RAID
device aacp # SCSI passthrough for aac (requires CAM)
device ida # Compaq Smart RAID
device mfi # LSI MegaRAID SAS
device mlx # Mylex DAC960 family
#XXX pointer/int warnings
#device pst # Promise Supertrak SX6000
device twe # 3ware ATA RAID
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device kbdmux # keyboard multiplexer
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
device agp # support several AGP chipsets
# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
device cbb # cardbus (yenta) bridge
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
device uart # Generic UART driver
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
device puc # Multi I/O cards and multi-channel UARTs
# PCI Ethernet NICs.
device de # DEC/Intel DC21x4x (``Tulip'')
device em # Intel PRO/1000 Gigabit Ethernet Family
device igb # Intel PRO/1000 PCIE Server Gigabit Family
device ixgbe # Intel PRO/10GbE PCIE Ethernet Family
device le # AMD Am7900 LANCE and Am79C9xx PCnet
device ti # Alteon Networks Tigon I/II gigabit Ethernet
device txp # 3Com 3cR990 (``Typhoon'')
device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device ae # Attansic/Atheros L2 FastEthernet
device age # Attansic/Atheros L1 Gigabit Ethernet
device alc # Atheros AR8131/AR8132 Ethernet
device ale # Atheros AR8121/AR8113/AR8114 Ethernet
device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
device bfe # Broadcom BCM440x 10/100 Ethernet
device bge # Broadcom BCM570xx Gigabit Ethernet
device dc # DEC/Intel 21143 and various workalikes
device et # Agere ET1310 10/100/Gigabit Ethernet
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
device lge # Level 1 LXT1001 gigabit Ethernet
device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
device nfe # nVidia nForce MCP on-board Ethernet
device nge # NatSemi DP83820 gigabit Ethernet
#device nve # nVidia nForce MCP on-board Ethernet
Networking
device pcn # AMD Am79C97x PCI 10/100 (precedence over
'le')
device re # RealTek 8139C+/8169/8169S/8110S
device rl # RealTek 8129/8139
device sf # Adaptec AIC-6915 (``Starfire'')
device sge # Silicon Integrated Systems SiS190/191
device sis # Silicon Integrated Systems SiS 900/SiS 7016
device sk # SysKonnect SK-984x & SK-982x gigabit
Ethernet
device ste # Sundance ST201 (D-Link DFE-550TX)
device stge # Sundance/Tamarack TC9021 gigabit Ethernet
device tl # Texas Instruments ThunderLAN
device tx # SMC EtherPower II (83c170 ``EPIC'')
device vge # VIA VT612x gigabit Ethernet
device vr # VIA Rhine, Rhine II
device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs. pccard NICs included.
device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
device ex # Intel EtherExpress Pro/10 and Pro/10+
device ep # Etherlink III based cards
device fe # Fujitsu MB8696x based cards
device sn # SMC's 9000 series of Ethernet chips
device xe # Xircom pccard Ethernet
# Wireless NIC cards
device wlan # 802.11 support
options IEEE80211_DEBUG # enable debug msgs
options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's
options IEEE80211_SUPPORT_MESH # enable 802.11s draft support
device wlan_wep # 802.11 WEP support
device wlan_ccmp # 802.11 CCMP support
device wlan_tkip # 802.11 TKIP support
device wlan_amrr # AMRR transmit rate control algorithm
device an # Aironet 4500/4800 802.11 wireless NICs.
device ath # Atheros pci/cardbus NIC's
device ath_hal # pci/cardbus chip support
options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors
device ath_rate_sample # SampleRate tx rate control for ath
device ral # Ralink Technology RT2500 wireless NICs.
device wi # WaveLAN/Intersil/Symbol 802.11 wireless
NICs.
# Pseudo devices.
device loop # Network loopback
device random # Entropy device
device ether # Ethernet support
device vlan # 802.1Q VLAN support
device tun # Packet tunnel.
device pty # BSD-style compatibility pseudo ttys
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
device firmware # firmware assist module
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter
# USB support
options USB_DEBUG # enable debug msgs
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device ehci # EHCI PCI->USB interface (USB 2.0)
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device urio # Diamond Rio 500 MP3 player
# USB Serial devices
device uark # Technologies ARK3116 based serial adapters
device ubsa # Belkin F5U103 and compatible serial adapters
device uftdi # For FTDI usb serial adapters
device uipaq # Some WinCE based devices
device uplcom # Prolific PL-2303 serial adapters
device uslcom # SI Labs CP2101/CP2102 serial adapters
device uvisor # Visor and Palm devices
device uvscom # USB serial support for DDI pocket's PHS
# USB Ethernet, requires miibus
device aue # ADMtek USB Ethernet
device axe # ASIX Electronics USB Ethernet
device cdce # Generic USB over Ethernet
device cue # CATC USB Ethernet
device kue # Kawasaki LSI USB Ethernet
device rue # RealTek RTL8150 USB Ethernet
device udav # Davicom DM9601E USB
# USB Wireless
device rum # Ralink Technology RT2501USB wireless NICs
device uath # Atheros AR5523 wireless NICs
device ural # Ralink Technology RT2500USB wireless NICs
device zyd # ZyDAS zb1211/zb1211b wireless NICs
# FireWire support
device firewire # FireWire bus code
#device sbp # SCSI over FireWire (Requires scbus and da)
device fwe # Ethernet over FireWire (non-standard!)
device fwip # IP over FireWire (RFC 2734,3146)
device dcons # Dumb console driver
device dcons_crom # Configuration ROM for dcons
device urtw # urtw
#options URTW_DEBUG # enable debugging for urtw
device ahci
device sound
device snd_hda
-----
dmesg output:
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-STABLE #4: Wed Oct 5 22:17:21 CDT 2011
root at blackbeast.local:/usr/obj/usr/src/sys/BLACKBEAST amd64
module urtw already present!
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Phenom(tm) II X2 550 Processor (3833.36-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x100f43 Family = 10 Model = 4 Stepping = 3
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802009<SSE3,MON,CX16,POPCNT>
AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!
+,3DNow!>
AMD
Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT>
TSC: P-state invariant
real memory = 4294967296 (4096 MB)
avail memory = 4076732416 (3887 MB)
ACPI APIC Table: <GBT GBTUACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <GBT GBTUACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cfbf0000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xef00-0xef7f mem
0xfa000000-0xfaffffff,0xd0000000-0xdfffffff,0xf8000000-0xf9ffffff irq 18 at
device 0.0 on pci1
nvidia0: <GeForce 9600 GT> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port
0xde00-0xdeff mem 0xfdfff000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 18 at device
0.0 on pci2
re0: Using 1 MSI-X message
re0: Chip rev. 0x3c000000
re0: MAC rev. 0x00400000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-
FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX,
1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto,
auto-flow
re0: Ethernet address: 00:24:1d:d4:96:90
re0: [ITHREAD]
ahci0: <ATI IXP700 AHCI SATA controller> port
0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem
0xfe02f000-0xfe02f3ff irq 22 at device 17.0 on pci0
ahci0: [ITHREAD]
ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [ITHREAD]
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [ITHREAD]
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: [ITHREAD]
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: [ITHREAD]
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: [ITHREAD]
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 16 at
device 18.0 on pci0
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 16 at
device 18.1 on pci0
ohci1: [ITHREAD]
usbus1: <OHCI (generic) USB controller> on ohci1
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02c000-0xfe02c0ff irq 17 at
device 18.2 on pci0
ehci0: [ITHREAD]
usbus2: EHCI version 1.0
usbus2: <EHCI (generic) USB 2.0 controller> on ehci0
ohci2: <OHCI (generic) USB controller> mem 0xfe02b000-0xfe02bfff irq 18 at
device 19.0 on pci0
ohci2: [ITHREAD]
usbus3: <OHCI (generic) USB controller> on ohci2
ohci3: <OHCI (generic) USB controller> mem 0xfe02a000-0xfe02afff irq 18 at
device 19.1 on pci0
ohci3: [ITHREAD]
usbus4: <OHCI (generic) USB controller> on ohci3
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe029000-0xfe0290ff irq 19 at
device 19.2 on pci0
ehci1: [ITHREAD]
usbus5: EHCI version 1.0
usbus5: <EHCI (generic) USB 2.0 controller> on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP700/800 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
hdac0: <ATI SB600 High Definition Audio Controller> mem 0xfe024000-0xfe027fff
irq 16 at device 20.2 on pci0
hdac0: HDA Driver Revision: 20100226_0142
hdac0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci3: <ACPI PCI bus> on pcib3
fwohci0: <Texas Instruments TSB43AB23> mem
0xfdeff000-0xfdeff7ff,0xfdef8000-0xfdefbfff irq 22 at device 14.0 on pci3
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:4f:08:f8:00:00:24:1d
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x3b0c000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:4f:08:00:24:1d
fwe0: Ethernet address: 02:4f:08:00:24:1d
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:4f:08:f8:00:00:24:1d @ 0xfffe00000000, S400,
maxrec 2048
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER
mode
ohci4: <OHCI (generic) USB controller> mem 0xfe028000-0xfe028fff irq 18 at
device 20.5 on pci0
ohci4: [ITHREAD]
usbus6: <OHCI (generic) USB controller> on ohci4
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8
on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
usbus6: 12Mbps Full Speed USB v1.0
ad0: 76319MB <WDC WD800JB-00FMA0 13.03G13> at ata0-master UDMA100
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <ATI> at usbus4
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <ATI> at usbus5
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ugen6.1: <ATI> at usbus6
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
hdac0: HDA Codec #0: Realtek ALC888
pcm0: <HDA Realtek ALC888 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Realtek ALC888 PCM #1 Analog> at cad 0 nid 1 on hdac0
pcm2: <HDA Realtek ALC888 PCM #2 Digital> at cad 0 nid 1 on hdac0
uhub6: 2 ports with 2 removable, self powered
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
uhub3: 3 ports with 3 removable, self powered
uhub4: 3 ports with 3 removable, self powered
uhub2: 6 ports with 6 removable, self powered
uhub5: 6 ports with 6 removable, self powered
ugen1.2: <vendor 0x046d> at usbus1
uhid0: <vendor 0x046d product 0xc216, class 0/0, rev 1.10/3.00, addr 2> on
usbus1
ugen5.2: <vendor 0x0846> at usbus5
urtw0: <vendor 0x0846 product 0x6a00, class 0/0, rev 2.00/1.00, addr 2> on
usbus5
urtw0: unknown RTL8187L type: 0x8000000
ugen1.3: <Logitech> at usbus1
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 3> on usbus1
kbd2 at ukbd0
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 3> on usbus1
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid1: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 3> on usbus1
urtw0: rtl8187l rf rtl8225u hwrev none
ugen4.2: <vendor 0x046d> at usbus4
uhub7: <vendor 0x046d G11 Keyboard, class 9/0, rev 1.10/1.71, addr 2> on
usbus4
uhub7: 4 ports with 2 removable, bus powered
ugen4.3: <vendor 0x046d> at usbus4
ukbd1: <vendor 0x046d Gaming Keyboard, class 0/0, rev 2.00/1.90, addr 3> on
usbus4
kbd3 at ukbd1
uhid2: <vendor 0x046d Gaming Keyboard, class 0/0, rev 2.00/1.90, addr 3> on
usbus4
ugen4.4: <vendor 0x046d> at usbus4
uhid3: <vendor 0x046d G11 Keyboard, class 0/0, rev 2.00/1.71, addr 4> on
usbus4
ahcich5: Timeout on slot 0 port 0
ahcich5: is 00000000 cs 00000001 ss 00000000 rs 00000001 tfd 180 serr 00000000
cmd 0000e017
ada0 at ahcich4 bus 0 scbus4 target 0 lun 0
ada0: <WDC WD5000AAKS-22YGA0 12.01C02> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
SMP: AP CPU #1 Launched!
cd0 at ahcich5 bus 0 scbus5 target 0 lun 0
cd0: <DVDRW SATA 20X20X12X 9A31> Removable CD-ROM SCSI-0 device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray
closed
Trying to mount root from zfs:zroot
wlan0: Ethernet address: 00:1b:2f:92:56:00
wlan0: link state changed to UP
ugen3.2: <Panasonic> at usbus3
umass0: <Panasonic DMC-FH20, class 0/0, rev 1.10/1.00, addr 2> on usbus3
umass0: SCSI over Bulk-Only; quirks = 0x4000
umass0:6:0:-1: Attached to scbus6
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
da0: <MATSHITA DMC-FH20 0100> Removable Direct Access SCSI-2 device
da0: 1.000MB/s transfers
da0: 7643MB (15652864 512 byte sectors: 255H 63S/T 974C)
GEOM: da0: partition 1 does not start on a track boundary.
GEOM: da0: partition 1 does not end on a track boundary.
ugen3.2: <Panasonic> at usbus3 (disconnected)
umass0: at uhub3, port 2, addr 2 (disconnected)
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
linux: pid 2526 (npviewer.bin): syscall inotify_init not implemented
-------
More information about the freebsd-net
mailing list