Problem with re0

[Pyun YongHyeon]

On Sun, Jan 30, 2011 at 05:20:32PM -0800, Pyun YongHyeon wrote:
> On Sun, Jan 30, 2011 at 08:40:48AM +0200, Zeus V Panchenko wrote:
> > another detail for this nic
> > 
> > dmidecode
> > Base Board Information
> >         Manufacturer: ASUSTeK Computer INC.
> >         Product Name: AT5NM10-I
> >         Version: Rev x.0x
> >         Serial Number: MT7006K15200322
> > 
> > uname -a
> > FreeBSD 8.2-PRERELEASE amd64 
> > 
> > system was cvsup-ed 2011.01.20
> > 
> > if_re.c,v 1.160.2.17 2011/01/15 00:32:15 yongari
> > 
> > dmesg
> > rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
> > rgephy0:  10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
> > re0: Ethernet address: 20:cf:30:89:5e:95
> > re0: [FILTER]
> > 
> > pciconf -lv
> > re0 at pci0:2:0:0: class=0x020000 card=0x83a31043 chip=0x816810ec rev=0x03 hdr=0x00
> >     vendor     = 'Realtek Semiconductor'
> >     device     = 'Gigabit Ethernet NIC(NDIS 6.0) (RTL8168/8111/8111c)'
> >     class      = network
> >     subclass   = ethernet
> > 
> > 
> > while connected directly NIC <-> NIC they flaps too
> > 
> > so, the issue with switch related causes can be excluded i believe
> > 
> 
> The RTL8168/8111D sample board I have does not show this kind of
> issue. This happens only when established link is 1000baseT, right?
> I slightly changed PHY's link detection code so would you try that
> patch at the following URL?
> http://people.freebsd.org/~yongari/re/rgephy.link.patch3

Previous one had a bug, please update one.
http://people.freebsd.org/~yongari/re/rgephy.link.patch4