ipv6 routing

[Hiroki Sato]

"Dan Langille" <dan at langille.org> wrote
  in <0a85d5595ffdc548668406d3e87621c2.squirrel at nyi.unixathome.org>:

da> >  Can you show the results of "ifconfig fxp1"?
da>
da> # ifconfig fxp1
da> fxp1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
da>         options=9<RXCSUM,VLAN_MTU>
da>         ether 00:04:ac:d3:70:12
da>         inet 10.55.0.1 netmask 0xffffff00 broadcast 10.55.0.255
da>         inet6 2001:470:1f07:b80::1 prefixlen 64
da>         nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
da>         media: Ethernet autoselect (100baseTX <full-duplex>)
da>         status: active

 The fxp1 should have "inet6 fe80::0204:acff:fed3:7012%fxp1 prefixlen
 64" here.

 Do you set ipv6_enable="YES" in rc.conf on the router box?  If not,
 the fe80:: address is not automatically added, and probably you will
 have trouble in IPv6 configuration in various ways.

-- Hiroki
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 195 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-net/attachments/20101001/089715c0/attachment.pgp