kern/92090: [bge] bge: watchdog timeout -- resetting

[Floris Bos]

Hi,

On Thursday 14 January 2010 03:54:52 am Pyun YongHyeon wrote:
> >  ==
> >  bge0: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100> mem 0xdf900000-0xdf90ffff irq 16 at device 0.0 on pci32
> >  ==
> >  
> >  After boot, the network works for about 5 seconds, barely enough time to get an IP by DHCP, and sent a ping or 2.
> >  Then network connectivity goes down, and after some time there is a "bge0: watchdog timeout -- resetting" message.
> >  
> >  Then network works again for 5 seconds, and goes down again. All the time, repeatedly.
> >  
> >  The system works fine under Ubuntu. So I assume the hardware is ok.
> >  
> 
> I'm not sure but it looks like you have a BCM5784 controller. What is
> the output of "devinfo -rv | grep phy"?

==
ukphy0 pnpinfo oui=0x50ef model=0x3a rev=0x4 at phyno=1
ukphy1 pnpinfo oui=0x50ef model=0x3a rev=0x4 at phyno=1
==

According to the specs in the HP manual it is supposed to be a BCM5723 ( http://www.dectrader.com/docs/set5/c01931407.pdf )


Yours sincerely,

Floris Bos