uath under FreeBSD 8.0-STABLE

[Steven Friedrich]

On Wednesday 06 January 2010 10:34:43 pm Weongyo Jeong wrote:
> On Wed, Jan 06, 2010 at 12:44:46PM -0500, Steven Friedrich wrote:
> > On Monday 04 January 2010 05:31:18 pm Weongyo Jeong wrote:
> > > On Mon, Jan 04, 2010 at 03:57:56PM -0500, Steven Friedrich wrote:
> > > > On Monday 04 January 2010 03:34:41 pm Weongyo Jeong wrote:
> > > > > Could you please test with attached patch?  Today the device I
> > > > > ordered is delivered and I tried to test with it.  One thing, it
> > > > > looks weird, I noticed is that after uploading the firmware,
> > > > > idProduct is increased not decreased.
> > > > >
> > > > > After patching, you should rebuild the module.
> > > >
> > > > I didn't get an attachment...
> > >
> > > Attached.
> > >
> > > regards,
> > > Weongyo Jeong
> >
> > I had to place:
> > # Firmware download for Netgear WG111T USB ethernet.
> > attach 100 {
> > 	match "vendor"	"0x1385";
> > 	match "product"	"0x4251";
> > 	action "/usr/sbin/uathload -d /dev/$device-name";
> > };
> >
> > in /etc/devd.conf, but I later moved it to
> > /usr/local/etc/devd/WG111T.conf
> >
> > Then it appeared in the ifconfig as uath0.
> >
> > But I get errors later when I run wpa_supplicant -B -i wlan0 -c
> > /etc/wpa_supplicant.conf
> >
> > Those errors are:
> > uath0: timeout waiting for reply to cmd 0x8 (8)
> > uath0: could not start target, error 35
> >
> > Your patch DOES work, AFAIK.
> 
> I tested WPA test with my device today and  it worked.  Could you please
> show me your wpa_supplicant.conf and commands?  The following is my
> configuration and command.
> 
>     # cat /etc/wpa_supplicant.conf
>     ctrl_interface=/var/run/wpa_supplicant
>     ctrl_interface_group=wheel
> 
>     network={
> 	ssid="wg"
> 	bssid=00:08:XX:XX:XX:15
> 	proto=WPA
> 	key_mgmt=WPA-PSK
> 	pairwise=TKIP
> 	group=TKIP
> 	scan_ssid=1
> 	psk="XXXXXXXXXX"
>     }
> 
>     # uathload -d /dev/ugen1.2
>     ugen1.2: <Atheros Communications Inc> at usbus1 (disconnected)
>     ugen1.2: <Athero Communications Inc> at usbus1
>     uath0: <Atheros Communications Inc WG111T, rev 2.00/0.01, addr 2> on
>     usbus1
>     # ifconfig wlan0 create wlandev uath0
>     wlan0: Ethernet address: 00:1b:2f:XX:XX:ca
>     <s/modules/usb/uath]# wpa_supplicant -i wlan0 -c
>  /etc/wpa_supplicant.conf CTRL-EVENT-SCAN-RESULTS
>     Trying to associate with 00:08:XX:XX:XX:14 (SSID='wg' freq=2437 MHz)
>     Associated with 00:08:XX:XX:XX:14
>     WPA: Key negotiation completed with 00:08:XX:XX:XX:14 [PTK=TKIP
>     GTK=TKIP]
>     CTRL-EVENT-CONNECTED - Connection to 00:08:XX:XX:XX:14 completed (auth)
>     [id=0 id_str=]
> 
> regards,
> Weongyo Jeong
> 
> _______________________________________________
> freebsd-net at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-net
> To unsubscribe, send any mail to "freebsd-net-unsubscribe at freebsd.org"
> 
Here's my /etc/wpa_supplicant.conf
# ap_scan should be 2 when using ndis (bcmwl5_sys) driver,
#                   1 when using bwi, uath
        ap_scan=1
network={
        bssid=00:xx:xx:xx:xx:50
        ssid="FriedrichAir"
        scan_ssid=1
        key_mgmt=WPA-PSK
        pairwise=TKIP
        group=TKIP
        proto=WPA WPA2
        psk="xxxxxxxxxxxxxxxx"
}