7.1 and ural problem

[Bobby Walker]

Hey list, I've searched and searched for a solution to this problem and I can't find one.

 

I've got the wireless nic setup, its a Linksys WUSB54G v2.

 

Its picked up by the ural driver, but as far as I can tell that driver doesn't work for it.

 

dmesg gives me:

 

ural0: MAC/BBP RT2570 (rev 0x05), RF RT2526

ural0: WARNING: using obsoleted IFF_NEEDSGIANT flag

ural0: Ethernet address: 00:18:39:03:35:3b

 

Then I get a series of messages that repeat:

ural0: link state changed to UP

ural0: link state changed to DOWN

ural0: link state changed to UP

ural0: link state changed to DOWN

 

Here's ifconfig when the device is UP:

ural0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500

     ether 00:18:39:03:35:3b

     inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255

     media: IEEE 802.11 Wireless Ethernet autoselect (OFDM/36Mbps)

     status: associated

     ssid MYNETWORK channel 6 (2437 Mgz 11g) bssid 00:25:9c:9e:e0:00

     authmode WPA2/802.11i privacy ON deftxkey UNDEF txpower 50 bmiss 7

     scanvalid 60 protmode CTS roaming MANUAL

 

And in my rc.conf I have this defined:

ifconfig_ural0="wpa DHCP"

hostname="my.home.server"

 

And lastly this is my wpa_supplicant.conf

network={

     ssid="MYNETWORK"

     key_mgmt=WPA-PSK

     psk="mysecretpass"

}

 

Anyone have any ideas on how I can pull down a stable connection with this so that I can upgrade to 8.0?

 

Thanks in advance,

Bobby
 		 	   		  
_________________________________________________________________
The New Busy is not the too busy. Combine all your e-mail accounts with Hotmail.
http://www.windowslive.com/campaign/thenewbusy?tile=multiaccount&ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_4