Broadcom BCM5701 / HP NC6770
Erich Jenkins, Fuujin Group Ltd
erich at fuujingroup.com
Sat Apr 10 05:22:29 UTC 2010
Forgot the verbose boot messages:
Apr 9 22:59:37 test newsyslog[494]: logfile first created
Apr 9 22:59:38 test syslogd: kernel boot file is /boot/kernel/kernel
Apr 9 22:59:38 test kernel: Copyright (c) 1992-2010 The FreeBSD Project.
Apr 9 22:59:38 test kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988,
1989, 1991, 1992, 1993, 1994
Apr 9 22:59:38 test kernel: The Regents of the University of
California. All rights reserved.
Apr 9 22:59:38 test kernel: FreeBSD is a registered trademark of The
FreeBSD Foundation.
Apr 9 22:59:38 test kernel: FreeBSD 7.3-RELEASE #0: Sun Mar 21 06:15:01
UTC 2010
Apr 9 22:59:38 test kernel:
root at walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
Apr 9 22:59:38 test kernel: Timecounter "i8254" frequency 1193182 Hz
quality 0
Apr 9 22:59:38 test kernel: CPU: Intel(R) Xeon(TM) MP CPU 2.80GHz
(2799.92-MHz 686-class CPU)
Apr 9 22:59:38 test kernel: Origin = "GenuineIntel" Id = 0xf25
Stepping = 5
Apr 9 22:59:38 test kernel:
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Apr 9 22:59:38 test kernel: Features2=0x4400<CNXT-ID,xTPR>
Apr 9 22:59:38 test kernel: Logical CPUs per core: 2
Apr 9 22:59:38 test kernel: real memory = 4093607936 (3903 MB)
Apr 9 22:59:38 test kernel: avail memory = 4003602432 (3818 MB)
Apr 9 22:59:38 test kernel: ACPI APIC Table: <COMPAQ 00000083>
Apr 9 22:59:38 test kernel: FreeBSD/SMP: Multiprocessor System
Detected: 8 CPUs
Apr 9 22:59:38 test kernel: cpu0 (BSP): APIC ID: 0
Apr 9 22:59:38 test kernel: cpu1 (AP/HT): APIC ID: 1
Apr 9 22:59:38 test kernel: cpu2 (AP): APIC ID: 2
Apr 9 22:59:38 test kernel: cpu3 (AP/HT): APIC ID: 3
Apr 9 22:59:38 test kernel: cpu4 (AP): APIC ID: 4
Apr 9 22:59:38 test kernel: cpu5 (AP/HT): APIC ID: 5
Apr 9 22:59:38 test kernel: cpu6 (AP): APIC ID: 6
Apr 9 22:59:38 test kernel: cpu7 (AP/HT): APIC ID: 7
Apr 9 22:59:38 test kernel: MADT: Forcing active-low polarity and level
trigger for SCI
Apr 9 22:59:38 test kernel: ioapic0 <Version 1.1> irqs 0-15 on motherboard
Apr 9 22:59:38 test kernel: ioapic1 <Version 1.1> irqs 16-31 on motherboard
Apr 9 22:59:38 test kernel: ioapic2 <Version 1.1> irqs 32-47 on motherboard
Apr 9 22:59:38 test kernel: ioapic3 <Version 1.1> irqs 48-63 on motherboard
Apr 9 22:59:38 test kernel: kbd1 at kbdmux0
Apr 9 22:59:38 test kernel: acpi0: <COMPAQ P27> on motherboard
Apr 9 22:59:38 test kernel: acpi0: [ITHREAD]
Apr 9 22:59:38 test kernel: acpi0: Power Button (fixed)
Apr 9 22:59:38 test kernel: Timecounter "ACPI-safe" frequency 3579545
Hz quality 850
Apr 9 22:59:38 test kernel: acpi_timer0: <32-bit timer at 3.579545MHz>
port 0x920-0x923 on acpi0
Apr 9 22:59:38 test kernel: pcib0: <ACPI Host-PCI bridge> on acpi0
Apr 9 22:59:38 test kernel: pci0: <ACPI PCI bus> on pcib0
Apr 9 22:59:38 test kernel: pci0: <base peripheral> at device 2.0 (no
driver attached)
Apr 9 22:59:38 test kernel: pci0: <base peripheral> at device 2.2 (no
driver attached)
Apr 9 22:59:38 test kernel: vgapci0: <VGA-compatible display> port
0x2800-0x28ff mem 0xf6000000-0xf6ffffff,0xf5ff0000-0xf5ff0fff at device
3.0 on pci0
Apr 9 22:59:38 test kernel: isab0: <PCI-ISA bridge> at device 15.0 on pci0
Apr 9 22:59:38 test kernel: isa0: <ISA bus> on isab0
Apr 9 22:59:38 test kernel: atapci0: <ServerWorks CSB5 UDMA100
controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2000-0x200f at
device 15.1 on pci0
Apr 9 22:59:38 test kernel: ata0: <ATA channel 0> on atapci0
Apr 9 22:59:38 test kernel: ata0: [ITHREAD]
Apr 9 22:59:38 test kernel: ata1: <ATA channel 1> on atapci0
Apr 9 22:59:38 test kernel: ata1: [ITHREAD]
Apr 9 22:59:38 test kernel: ohci0: <OHCI (generic) USB controller> mem
0xf5fe0000-0xf5fe0fff irq 7 at device 15.2 on pci0
Apr 9 22:59:38 test kernel: ohci0: [GIANT-LOCKED]
Apr 9 22:59:38 test kernel: ohci0: [ITHREAD]
Apr 9 22:59:38 test kernel: usb0: OHCI version 1.0, legacy support
Apr 9 22:59:38 test kernel: usb0: SMM does not respond, resetting
Apr 9 22:59:38 test kernel: usb0: <OHCI (generic) USB controller> on ohci0
Apr 9 22:59:38 test kernel: usb0: USB revision 1.0
Apr 9 22:59:38 test kernel: uhub0: <(0x1166) OHCI root hub, class 9/0,
rev 1.00/1.00, addr 1> on usb0
Apr 9 22:59:38 test kernel: uhub0: 4 ports with 4 removable, self powered
Apr 9 22:59:38 test kernel: pcib1: <ACPI Host-PCI bridge> on acpi0
Apr 9 22:59:38 test kernel: pci1: <ACPI PCI bus> on pcib1
Apr 9 22:59:38 test kernel: ciss0: <Compaq Smart Array 5i> port
0x3000-0x30ff mem 0xf7cc0000-0xf7cfffff,0xf7bf0000-0xf7bf3fff irq 31 at
device 1.0 on pci1
Apr 9 22:59:38 test kernel: ciss0: [ITHREAD]
Apr 9 22:59:38 test kernel: pcib2: <ACPI Host-PCI bridge> on acpi0
Apr 9 22:59:38 test kernel: pci2: <ACPI PCI bus> on pcib2
Apr 9 22:59:38 test kernel: em0: <Intel(R) PRO/1000 Network Connection
6.9.6> port 0x4000-0x403f mem
0xf7de0000-0xf7dfffff,0xf7dc0000-0xf7ddffff irq 16 at device 2.0 on pci2
Apr 9 22:59:38 test kernel: em0: [FILTER]
Apr 9 22:59:38 test kernel: em0: Ethernet address: 00:1b:21:20:1a:72
Apr 9 22:59:38 test kernel: pci2: <base peripheral, PCI hot-plug
controller> at device 30.0 (no driver attached)
Apr 9 22:59:38 test kernel: pcib3: <ACPI Host-PCI bridge> on acpi0
Apr 9 22:59:38 test kernel: pci6: <ACPI PCI bus> on pcib3
Apr 9 22:59:38 test kernel: pci6: <base peripheral, PCI hot-plug
controller> at device 30.0 (no driver attached)
Apr 9 22:59:38 test kernel: pcib4: <ACPI Host-PCI bridge> on acpi0
Apr 9 22:59:38 test kernel: pci10: <ACPI PCI bus> on pcib4
Apr 9 22:59:38 test kernel: bge0: <HP NC6770 Gigabit Ethernet
Controller, ASIC rev. 0x000105> mem 0xf7ff0000-0xf7ffffff irq 26 at
device 1.0 on pci10
Apr 9 22:59:38 test kernel: bge0: Ethernet address: 00:08:02:28:76:4d
Apr 9 22:59:38 test kernel: bge0: [ITHREAD]
Apr 9 22:59:38 test kernel: acpi_tz0: <Thermal Zone> on acpi0
Apr 9 22:59:38 test kernel: atkbdc0: <Keyboard controller (i8042)> port
0x60,0x64 irq 1 on acpi0
Apr 9 22:59:38 test kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
Apr 9 22:59:38 test kernel: kbd0 at atkbd0
Apr 9 22:59:38 test kernel: atkbd0: [GIANT-LOCKED]
Apr 9 22:59:38 test kernel: atkbd0: [ITHREAD]
Apr 9 22:59:38 test kernel: sio0: <Standard PC COM port> port
0x3f8-0x3ff irq 4 flags 0x10 on acpi0
Apr 9 22:59:38 test kernel: sio0: type 16550A
Apr 9 22:59:38 test kernel: sio0: [FILTER]
Apr 9 22:59:38 test kernel: fdc0: <floppy drive controller (FDE)> port
0x3f2-0x3f5 irq 6 drq 2 on acpi0
Apr 9 22:59:38 test kernel: fdc0: [FILTER]
Apr 9 22:59:38 test kernel: cpu0: <ACPI CPU> on acpi0
Apr 9 22:59:38 test kernel: p4tcc0: <CPU Frequency Thermal Control> on cpu0
Apr 9 22:59:38 test kernel: cpu1: <ACPI CPU> on acpi0
Apr 9 22:59:38 test kernel: p4tcc1: <CPU Frequency Thermal Control> on cpu1
Apr 9 22:59:38 test kernel: cpu2: <ACPI CPU> on acpi0
Apr 9 22:59:38 test kernel: p4tcc2: <CPU Frequency Thermal Control> on cpu2
Apr 9 22:59:38 test kernel: cpu3: <ACPI CPU> on acpi0
Apr 9 22:59:38 test kernel: p4tcc3: <CPU Frequency Thermal Control> on cpu3
Apr 9 22:59:38 test kernel: pmtimer0 on isa0
Apr 9 22:59:38 test kernel: orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xccfff,0xcd000-0xce7ff,0xee000-0xeffff
pnpid ORM0000 on isa0
Apr 9 22:59:38 test kernel: ppc0: parallel port not found.
Apr 9 22:59:38 test kernel: sc0: <System console> at flags 0x100 on isa0
Apr 9 22:59:38 test kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Apr 9 22:59:38 test kernel: sio1: configured irq 3 not in bitmap of
probed irqs 0
Apr 9 22:59:38 test kernel: sio1: port may not be enabled
Apr 9 22:59:38 test kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df
iomem 0xa0000-0xbffff on isa0
Apr 9 22:59:38 test kernel: Timecounters tick every 1.000 msec
Apr 9 22:59:38 test kernel: acd0: CDRW <DW-224E/A.1K> at ata0-master PIO4
Apr 9 22:59:38 test kernel: da0 at ciss0 bus 0 target 0 lun 0
Apr 9 22:59:38 test kernel: da0: <COMPAQ RAID 1 VOLUME OK> Fixed
Direct Access SCSI-0 device
Apr 9 22:59:38 test kernel: da0: 135.168MB/s transfers
Apr 9 22:59:38 test kernel: da0: Command Queueing Enabled
Apr 9 22:59:38 test kernel: da0: 70128MB (143624160 512 byte sectors:
255H 32S/T 17601C)
Apr 9 22:59:38 test kernel: SMP: AP CPU #4 Launched!
Apr 9 22:59:38 test kernel: SMP: AP CPU #6 Launched!
Apr 9 22:59:38 test kernel: SMP: AP CPU #1 Launched!
Apr 9 22:59:38 test kernel: SMP: AP CPU #3 Launched!
Apr 9 22:59:38 test kernel: SMP: AP CPU #5 Launched!
Apr 9 22:59:38 test kernel: SMP: AP CPU #7 Launched!
Apr 9 22:59:38 test kernel: SMP: AP CPU #2 Launched!
Apr 9 22:59:38 test kernel: Trying to mount root from ufs:/dev/da0s1a
Apr 9 22:59:39 test kernel: em0: link state changed to UP
Erich M. Jenkins
Fuujin Group Limited
"You should never, never doubt what no one is sure about."
-- Gene Wilder
Pyun YongHyeon wrote:
> On Fri, Apr 09, 2010 at 02:13:00AM -0600, Erich Jenkins, Fuujin Group Ltd wrote:
>> Evgenii Davidov wrote:
>>> Здравствуйте,
>>>
>>> On Fri, Apr 09, 2010 at 01:39:16AM -0600, Erich Jenkins, Fuujin Group Ltd
>>> пишет:
>>>
>>>> We were previously running 5.3 on this box (I know, VERY old), but never
>>>> had a problem. The link now fails to come up. I've tried forcing the
>>>> port out of auto (media 1000baseSX mediaopt full-duplex) and as long as
>>>> the port doesn't have an IP assigned via rc.conf on system boot, I can
>>>> get the switch to see it (Cisco 6505), but no traffic to flow. I've
>>>> checked all the obvious things (duplex setting on switch, cable failure,
>>>> etc.), all to no avail. I fiddled with the knobs in the driver (rxcsum,
>>>> vlan_mtu, etc) with no changes either.
>>> sorry for silly ansver but is your interface UP ? (ifconfig bge0 up)
>>>
>> Actually, I was silly for not mentioning that in the original post, but
>> yes, it's up. I've even tried up/down/up on the card a few times after
>> fiddling with the driver knobs, but the same thing happened, no link on
>> the switch.
>>
>> I've also tested this back-to-back with two machines and the same cards.
>> Same result: no transmission of data. Interestingly enough, the link
>> lite is lit on the cards (in back-to-back) and on the card but not the
>> switch. Not sure if that's significant or not. In the interest if
>> completeness, here's ifconfig output for that card:
>>
>> bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>> options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
>> ether 00:08:02:28:76:4d
>> inet 10.222.222.144 netmask 0xffffff00 broadcast 10.222.222.255
>> media: Ethernet 1000baseSX <full-duplex>
>> status: active
>>
>> I also verified the MTU size to ensure the switch ports weren't
>> configured for jumbo frames. They are correctly set on the switch and on
>> the FreeBSD box, but no traffic flows.
>>
>
> Would you try booting to latest 7.3-RELEASE and check whether you
> still see the issue?
> If you see the same issue please show me verbose boot message of
> bge(4) and its PHY driver.
> _______________________________________________
> freebsd-net at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-net
> To unsubscribe, send any mail to "freebsd-net-unsubscribe at freebsd.org"
More information about the freebsd-net
mailing list